In detail. TGW water tank sender.

  • High resolution: one switching point every 16 mm over the entire measuring range
  • More robust and space-saving than conventional lever-arm senders
  • Galvanically isolated measuring electronics – prevents galvanic corrosion
  • Removable at any time for inspection, including GWW threaded flange and seal

Compatibility.

Compatible with BTM2, VTM, PCU and CMT3.

Developed and manufactured in Germany.

Original equipment quality

  • Individually tested: every unit is connected and tested in a test environment in Remseck.
  • Brand-name components, as in series production for boatyards.
  • Repairable for decades: spare parts up to 30 years back, own repair centre.
How we manufacture

Technical data

FeatureValue
Resolutionapprox. 16 mm
Sender range8–180 Ω
Connection cable2x 0.34 mm², length 10 cm
Mounting positionvertical, ± 20°
Temperature range-10 to +70 °C
Overpressuremax. 1 bar
Protection classIP65
Lengths20 to 80 cm
UseBoat, yacht, expedition and off-road vehicle

Manufacturer and product safety

philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de

Safety information: see the operating manual and data sheet.

Frequently asked questions. Answered briefly.

Which tanks is the TGW suitable for?

The TGW tank sender is designed for water tanks on boats and yachts and in expedition vehicles. It is installed vertically, with up to ± 20° inclination permitted. For diesel or petrol fuel tanks, use the TGT tank sender. The TGW is available in lengths from 20 to 80 cm to match the height of your tank.

What is the measuring resolution?

The TGW has a switching point every 16 mm over the entire measuring range. This gives a resolution of approx. 16 mm, considerably finer than simple systems with only a few switching points. The sender supplies a resistance signal of 8 to 180 Ω, which the philippi on-board monitors evaluate directly.

What is the TGW compatible with?

The TGW tank sender works with the philippi BTM2, VTM and PCU on-board monitors and with the CMT3 tank interface. It is connected via a two-core cable with 2x 0.34 mm² and a length of 10 cm. The galvanically isolated measuring electronics prevent galvanic corrosion on the sender.

Is the sender easy to maintain?

Yes. The TGW sits in the supplied GWW threaded flange with seal and can be removed at any time, for example for inspection. As an immersion tube sender, it is more robust and space-saving than conventional lever-arm senders. It is protected to IP65 and rated for -10 to +70 °C and tank overpressure up to 1 bar.

Goes well with it. Accessories and add-ons.

philippi tank probes TDS/TDN 200 – hydrostatic submersible probe
philippi

Tank Probes TDS / TDN 200

from 359,00 €
Fuel tank sender TGT – dip-tube sender for diesel and petrol tanks
philippi

TGT fuel tank sender

from 119,50 €
philippi 3.5-inch tank monitor VTM 2 for up to 4 tanks
philippi

Tank Monitor 3.5" VTM 2

249,00 €
BTM2 display for battery and tank monitoring – front view
philippi

Battery Tank Monitor BTM2

285,00 €
philippi contactless ultrasonic level measurement UTV
philippi

Ultrasonic tank sender UTV, contactless level measurement

115,00 €
philippi screw-in tank probe TDT-10-250
philippi

Screw-in Tank Probe TDT-10-250

299,00 €
philippi tank sensor GOBIUS C with analogue output
Gobius

Tank Sensor Gobius C

389,00 €
philippi tank sensor GOBIUS PRO for side mounting
Gobius

Side-Mount Tank Sensor GOBIUS PRO

179,00 €

Prefer a quick chat?

Tell us what you are planning. We will tell you honestly what you need and what you don’t.

Beratung bei philippi in Remseck am Neckar