In detail. Battery cable & high-current cable Weldyflex 16–120 mm², highly flexible.

  • Highly flexible and robust – suitable for cold, heat, outdoor as well as dry and damp installation locations
  • Oil- and acid-resistant outer sheath made of EM5 rubber compound
  • Red/black colour coding for standard-compliant positive/negative wiring
  • Available by the metre and on 50 m reels for all common high-current cross-sections

The Weldyflex RT/SW is used wherever high currents must be transmitted safely between battery, main switch, inverter or engine. Thanks to its highly flexible strand construction, the philippi cable is easy to route even in tight spaces on board or in the vehicle, without the strands stiffening as with rigid cables.

The EM5 rubber compound outer sheath makes the Weldyflex flame-retardant as well as oil- and acid-resistant and allows use in a temperature range from –25 °C to +85 °C – including engine rooms and engine compartments. The cable is designed for rated voltages up to 100 V.

Original equipment quality

  • Individually tested: every unit is connected and tested in a test environment in Remseck.
  • Brand-name components, as in series production for boatyards.
  • Repairable for decades: spare parts up to 30 years back, own repair centre.
How we manufacture

Technical data

FeatureValue
Cross-sections16, 25, 35, 50, 70, 95, 120 mm²
Outer diameter16 mm²: Ø 9.0 mm
Rated voltage100 V
Temperature range–25 °C to +85 °C, flame-retardant
Sheath materialEM5 rubber compound, oil- and acid-resistant
ColoursRed, black
Supply units1 m (by the metre) or 50 m reel, 16 mm² also 10 cm

Manufacturer and product safety

philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de

Safety information: see the operating manual and data sheet.

Reviews. Unfiltered, via Judge.me.

5.0 out of 5

1 review on Judge.me

  • 5 ★ 1
  • 4 ★ 0
  • 3 ★ 0
  • 2 ★ 0
  • 1 ★ 0
  • Super flexibles Hochstromkabel, ich bin bestens zufrieden!

    Harald Schmitt · Verified purchase ·

Frequently asked questions. Answered briefly.

Which cross-section is right for my application?

The right cross-section depends on current, cable length and permissible voltage drop. For engine and battery leads carrying high currents, cross-sections of 50 mm² and above are common, while 16 to 35 mm² is often sufficient for smaller loads. Weldyflex is available in 16, 25, 35, 50, 70, 95 and 120 mm². The philippi team will be happy to advise you.

Is Weldyflex suitable for use in the engine room?

Yes. Weldyflex is rated for –25 °C to +85 °C and has a flame-retardant sheath made of EM5 rubber compound that is oil- and acid-resistant. This makes it suitable for engine rooms and engine compartments as well as for outdoor, dry and damp installation locations. The highly flexible strands are easy to route even in tight spaces.

In which lengths and colours is Weldyflex available?

Weldyflex is supplied by the metre and on 50 m reels, in red and black. The 16 mm² cross-section is also available in 10 cm pieces. When ordering, select the cross-section, colour and length. Using red for positive and black for negative makes standard-compliant and clearly organised wiring in the electrical system easier.

Prefer a quick chat?

Tell us what you are planning. We will tell you honestly what you need and what you don’t.

Beratung bei philippi in Remseck am Neckar