Switchboards Series 200.
Modular, with rocker circuit breakers.

The philippi Series 200 circuit distributors are DC switch panels for installation in the protected interior of sailing yachts, motorboats, aluminium and steel vessels and special vehicles. The circuits are switched and protected by E-T-A 3130 series thermal rocker circuit breakers; the integrated indicator light shows the operating state. In the event of a short circuit, the rocker jumps to the off position and the light goes out.

philippi STV Series 200 circuit distributors – comfort panel with rocker circuit breakers for boats, yachts & special vehicles

In brief: The STV Series 200 combines switching and protection in one rocker circuit breaker – with intuitive operation, clear status indication and trip-free release for maximum operational safety.


What is the STV Series 200 and what is it used for?

The STV Series 200 is a DC switch panel for 12 V and 24 V systems, designed for protected interior installation on yachts, boats and vehicles. Compared with the Series 100, it offers larger rocker circuit breakers, a higher standard rating and more configurations. E-T-A 3130 10 A circuit breakers are standard; single-pole 2 A, 6 A, 16 A or 20 A are possible on request, double-pole 6 A, 16 A or 20 A.

Special feature: the circuit breakers have trip-free release – switching off in the event of a fault cannot be prevented by holding the rocker. This ensures reliable cable protection even with accidental operation.


Technical features of the STV Series 200

Feature Details
Circuit breaker type E-T-A 3130, thermal, rocker type
Standard rating 10 A
Further values single-pole 2 / 6 / 16 / 20 A, double-pole 6 / 16 / 20 A; individually as spare and extension part also 30 A single-pole and 10 A push button
Indicator per circuit Integrated indicator light
Trip on fault Trip-free
Connection 6.3 mm blade receptacles at the rear
Rated voltage 12 V / 24 V DC
Installation location Interior (protected)
Aluminium/steel vessels Double-pole version (STVxxx-2p)
Supplied SKZ label sheet with self-adhesive labels

Double-pole version for aluminium and steel vessels

For aluminium and steel vessels, the circuit distributors are available with double-pole rocker circuit breakers. They switch and protect positive and negative, so the hull is never the return conductor. These variants are designated STVxxx-2p and, thanks to identical dimensions, can be freely combined with the single-pole models.


Which models are available in the Series 200?

  • STV 202 – 2 circuits, also as a motor vessel version with navigation light monitoring
  • STV 204 SY – 4 circuits, sailing yacht display with navigation light monitoring and alarm
  • STV 210 – 10 circuits
  • STV 218 – 7 circuits with BLS battery monitor set incl. shunt
  • STV 256 – 14 circuits with system monitor, sailing yacht display, DC and USB socket
  • STV 284 – 24 circuits with PSL system monitor, navigation light monitoring, DC and USB socket

Thanks to matched dimensions, all Series 200 models can be combined and extended horizontally and vertically. Individual circuit breakers for retrofitting can be found under Switch panel accessories. For cockpit and flybridge there is the waterproof Series 700; an overview of all series can be found under Switch panels.


Series 200 and Series 100 compared

Feature Series 100 Series 200
Circuit breaker E-T-A 1140 (push-button reset) E-T-A 3130 (rocker circuit breaker)
Standard rating 8 A 10 A
Maximum rating 16 A 20 A (individually up to 30 A)
Operation after a fault Press the red button Switch the rocker back on
Double-pole version No Yes (2p)
Max. circuits per panel 12 24
Typical use Small mounting area, sub-distribution Main switch panel, larger yachts

Frequently asked questions. Answered briefly.

To the Academy

What does the Series 200 offer compared with the Series 100?

The Series 200 uses larger E-T-A 3130 rocker circuit breakers instead of the E-T-A 1140 push-button breakers, has a higher standard rating of 10 A instead of 8 A and goes up to 24 circuits per panel. It is also available as a two-pole version for aluminium and steel boats. Both series can be combined.

What does trip-free fault release mean?

In the event of a fault, the circuit breaker always switches off, even if someone is holding or pressing the rocker at that moment. Tripping therefore cannot be prevented by hand. This keeps the cable reliably protected even if the panel is operated accidentally or incorrectly, and an overloaded circuit cannot be forced on.

Are the Series 200 switch panels suitable for aluminium and steel boats?

Yes, in the two-pole version, for example STV 203-2p, STV 206-2p or STV 212-2p. Their rocker circuit breakers switch and protect both the positive and negative pole of every circuit, so the hull never acts as a return conductor. The 2p panels have the same dimensions as the single-pole ones and can be combined with them.

Which current ratings are the circuit breakers available in?

The standard rating is 10 A. Single-pole breakers are also available with 2, 6, 16 and 20 A, two-pole breakers with 6, 16 and 20 A; a 30 A single-pole breaker and a 10 A push-button are also sold individually. The decisive factor is the cross-section of the cable. The cable configurator determines the right value.

Can several Series 200 panels be combined?

Yes. All Series 200 models have matching dimensions and can be assembled horizontally and vertically into a larger installation, also together with Series 100 panels. This way the switch panel grows with you when loads are added later; until then, Series 200 blank plates keep the space free for future circuits.