Repair Calira Check-Panel 200 and 210
philippi in Remseck am Neckar, Germany, developed and built the electronics of the Calira Check-Panels 200 and 210. That is why we still repair the CP 200 and CP 210 from motorhomes today, including the Bord Control 022 from PhoeniX motorhomes. A software update with hardware test costs 60 EUR, new hardware with test 200 EUR.
Send a photo · +49 7146 8744-0
Which panel do you have? We repair all versions.
Control Panel 200
The Calira Check-Panel 200 (CP 200), labelled “Control-Panel 200” on the device, shows fresh and waste water levels, battery voltage and temperature and switches consumers. It is also fitted with KABE lettering.
Control Panel 210
The Calira Check-Panel 210 (CP 210), labelled “Control Panel 210” on the device, in a silver frame. If the buttons stop responding, a software update is often enough.
Bord Control 022 in the PhoeniX
In PhoeniX motorhomes the Calira panel sits in the Bord Control 022, together with the PhoeniX control unit. We repair the Calira panel from it.
With Truma logo
The same panel also exists with a Truma logo. We repair this version too.
Not listed?
Feel free to send us a picture of your panel at info@philippi-online.de. We will tell you whether we can repair it.
Typical faults and what we do
- Buttons do not respond: On the Check-Panel 210 this is often a software state. A software update followed by a hardware test costs 60 EUR.
- Display stays dark: First check the fuse and whether 12 volts reach the panel. If the display stays dark despite voltage, send the panel in for testing.
- Wrong values after a battery change: A wrong battery count or a dead tank display usually points to a changed configuration. We reset it.
- Panel keeps failing: We check the circuit board in our repair centre in Remseck. If the hardware is faulty, you get new hardware with test for 200 EUR.
How the repair works
- Enquire: vehicle, year of manufacture, fault and a photo of the panel to info@philippi-online.de.
- Diagnosis: we tell you whether a software update with hardware test for 60 EUR is enough or new hardware with test for 200 EUR is needed.
- Send in: remove the panel, pack it safely and send it to philippi elektrische systeme GmbH, Neckaraue 19, 71686 Remseck am Neckar, Germany.
- Back in the vehicle: tested and shipped back after 1 to 2 days in the repair centre. New hardware comes with a 24-month warranty.
Questions about the Calira panel
Who repairs the Calira Check-Panel 200 and 210?
philippi elektrische systeme in Remseck am Neckar, Germany. We developed and built the electronics of the Check-Panels 200 and 210 for Calira and know both hardware and software. Send us photos and a short description of the fault. We will tell you whether a software solution is enough or a replacement is needed.
How much does a Calira panel repair cost?
A software update followed by a hardware test costs 60 EUR. This solves many faults on the Check-Panel 200 and 210. If the hardware is faulty, you get new hardware with test for 200 EUR. So you know in advance exactly what to expect.
The display of my Calira panel is dark. What can I do?
First check the fuse and whether 12 volts reach the panel. Often the fault lies in the power supply and not in the panel. If the display stays dark despite voltage, the electronics are affected. Then send us a photo and send the panel to Remseck for testing.
Do you also repair the Bord Control 022 from the PhoeniX?
Yes. In PhoeniX motorhomes the Calira Check-Panel 210 is fitted as Bord Control 022. We repair the CP 200 and CP 210 regardless of the vehicle brand. If you are unsure which panel you have, send us a photo of the front and of the type plate.
How long does the repair take and what warranty do I get?
In our repair centre in Remseck, repairing a Calira Check-Panel 200 or 210 usually takes 1 to 2 days, plus shipping both ways. If you receive new hardware, it carries the same warranty as all philippi products: 24 months.
How do I send in the panel?
Remove the panel, pack it securely and include a short fault description with your contact details. Send it to philippi elektrische systeme GmbH, Neckaraue 19, 71686 Remseck am Neckar, Germany. Ideally get in touch with photos beforehand, so we already know what to do.
Contact
philippi elektrische systeme GmbH, Neckaraue 19, 71686 Remseck am Neckar, Germany · Phone +49 7146 8744-0 · info@philippi-online.de
