Batteries
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
BullTron
Lithium Battery SB 12V150E EPSILON
BullTron
Lithium Battery SB 12V150E EPSILON
BullTron
Lithium Battery SB 12V150E EPSILON
BullTron
Lithium Battery SB 12V150E EPSILON
SuperB
Lithium Battery SB 12V210E NOMIA
SuperB
Lithium Battery SB 12V105E NOMADA
SuperB
Lithium Battery SB 12V150E EPSILON
Mastervolt
Lithium Ion Battery MLI Ultra
EP-Technologies
Lithium Battery 48V LB48/105
Blue Sea Systems
Double entrance cover caps
Blue Sea Systems
Battery pole cover BA 5 / BA 7
Blue Sea Systems
Cover caps BA 1 / BA 2 / BA 3
Blue Sea Systems
Battery terminal cover
Blue Sea Systems
Battery terminal - busbar set
Blue Sea Systems
Insulation cap for threaded studs
Blue Sea Systems
Rotating battery terminal covers
Batteries
Bulltron Lithium Batteries (LiFePO4) – Maximum Power for Modern Onboard Electrical Systems
Bulltron lithium batteries based on lithium iron phosphate (LiFePO4) are currently considered the most advanced solution for power supply on boats, yachts, motorhomes, and expedition vehicles. They offer significantly higher performance, longer lifespan, and better energy efficiency than conventional lead, AGM, or gel batteries – and are specifically designed for use in demanding onboard electrical systems with inverters, charge boosters, solar panels, and high-current consumers.
Briefly explained: Bulltron LiFePO4 batteries deliver more usable energy, weigh up to 70% less than comparable lead batteries, last for several thousand charge cycles, and protect themselves with an integrated battery management system – the complete solution for maximum autonomy on board and in vehicles.
Why Bulltron? – The Reasons for this Lithium Battery
Bulltron batteries are not just another lithium battery on the market. They were specially developed for mobile use in boats, yachts, and vehicles and are characterized by a number of technical features that clearly set them apart from cheaper alternatives:
- Active 5A cell balancer instead of passive balancer – cell balancing already in operation, not just at full charge
- P-Bus interface for direct real-time data transfer to compatible monitors and energy management systems
- Integrated BMS with complete protection against overcharging, deep discharge, overcurrent, short circuit, and overtemperature
- High-quality LiFePO4 cells with several thousand charge cycles – significantly more than AGM or gel batteries
- Tested safety – LiFePO4 is the safest lithium technology, thermally stable, no thermal runaway
Fast Charging Times due to High Charging Power
A decisive advantage of Bulltron lithium batteries is their ability to absorb high charging currents of up to 1C. This means: A 100 Ah battery can be fully charged in about one hour – with lead batteries, the same process takes many times longer.
All common energy sources can thus be optimally utilized: alternator, charge booster, solar system, shore power charger, and generator charge the Bulltron battery quickly and efficiently – without the long absorption phases required by lead batteries.
Full Power Down to the Last Ampere-Hour
In contrast to lead-acid batteries, the voltage of a Bulltron LiFePO4 battery remains almost constant throughout the entire discharge. This means that full power is available until shortly before complete discharge – connected devices and consumers are supplied consistently until the very end.
With continuous discharge currents from 1C to 3C and short-term peak currents of up to 10C, Bulltron batteries are ideal for power-intensive consumers:
Inverters, air conditioners, coffee machines, anchor winches, bow thrusters, induction cooktops, and other high-power consumers – all of this is no problem for a Bulltron LiFePO4 battery.
Up to 70% Weight and Space Savings Compared to Lead Batteries
Bulltron lithium batteries offer significantly higher energy density than conventional battery technologies. This allows for a considerable reduction in weight and installation space – a decisive advantage wherever every kilogram counts.
A concrete example: A 210 Ah LiFePO4 battery from Bulltron weighs only around 23 kg, while a comparable lead battery weighs about 70 kg. This corresponds to a weight saving of almost 50 kg with identical capacity.
The advantages at a glance: more payload, less weight on board, space-saving installation, higher energy yield per kilogram.
100% of Capacity Usable
While lead batteries should typically only be discharged to about 50% of their capacity for reasons of lifespan, almost the entire stored energy can be used with Bulltron LiFePO4 batteries. This means: A 100 Ah Bulltron battery effectively provides twice as much usable energy as a 100 Ah lead battery.
Low Self-Discharge and Exceptionally Long Lifespan
Bulltron lithium batteries are characterized by a very low self-discharge of less than 3% per month. They can be stored in a partially charged state for extended periods without damage or loss of capacity – ideal for seasonal use on boats and yachts.
With several thousand charge cycles, Bulltron LiFePO4 batteries achieve a significantly longer lifespan than AGM, gel, or lead-acid batteries, thereby significantly reducing total operating costs in the long run.
Active 5A Cell Balancer – Technological Advantage over Cheaper Alternatives
Bulltron lithium batteries feature an active 5A balancer that continuously equalizes cell voltages. This is a significant difference compared to cheaper batteries with only passive balancers:
| Feature | Passive Balancer | Active 5A Balancer (Bulltron) |
|---|---|---|
| Balancing Time | Only at full charge | Continuously during operation |
| Effectiveness | Limited | Significantly higher |
| Impact on Lifespan | Low | Positive, maximizes cell health |
| Energy Loss | Higher (heat) | Lower (active redistribution) |
This ensures that the individual cells remain optimally matched at all times – which further increases the battery's performance, efficiency, and lifespan.
Intelligent Battery Management System (BMS)
The Battery Management System (BMS) integrated into every Bulltron LiFePO4 battery continuously and fully automatically monitors and protects the lithium cells:
- Protection against overcharging
- Protection against deep discharge
- Cell temperature monitoring
- Protection against overcurrent
- Protection against short circuit
- Cell voltage monitoring
This ensures safe and reliable operation even under demanding conditions – without manual intervention.
P-Bus Interface – Real-time Data for Energy Management Systems
Thanks to the integrated P-Bus interface, important battery data can be transmitted directly to compatible Philippi monitors and energy management systems. State of charge, voltage, current, temperature, and remaining capacity are available in real-time – for complete monitoring of the entire energy system via the Philippi P-Bus System Monitor PSS, PSM2, or PSL.
What applications are Bulltron LiFePO4 batteries suitable for?
- Sailing yachts & motorboats – Service and starter batteries, high-current consumers
- Motorhomes & caravans – Autonomous power supply for longer journeys
- Expedition vehicles – Maximum energy with minimum weight and installation space
- Off-grid applications – Island power systems with solar and wind
- Everywhere high capacity, low weight, and long lifespan are required
Bulltron LiFePO4 vs. Lead/AGM/Gel – the direct comparison
| Feature | Lead / AGM / Gel | Bulltron LiFePO4 |
|---|---|---|
| Usable Capacity | ~50 % | ~100 % |
| Weight (210 Ah) | ~70 kg | ~23 kg |
| Charging Speed | Slow (limited) | Up to 1C, very fast |
| Charge Cycles | 300–500 | Several thousand |
| Voltage Consistency | Drops with discharge | Almost constant |
| Self-Discharge | 5–15 % / month | < 3 % / month |
| BMS | No | Integrated |
| Active Balancer | No | Yes, 5 A |
| P-Bus Interface | No | Yes |
Frequently Asked Questions about Bulltron LiFePO4 Batteries
Are Bulltron LiFePO4 batteries safe? Yes. LiFePO4 is the most thermally stable and safest lithium technology – no thermal runaway, no outgassing, no risk of fire due to overcharging like with other lithium chemistries. The integrated BMS provides additional complete protection.
Can I continue to use my existing charging infrastructure? Generally yes, however, chargers, charge boosters, and alternator regulators must be lithium-compatible and set to the correct charging parameters for LiFePO4. We would be happy to advise you on system planning.
What is the difference between an active and passive balancer? A passive balancer equalizes cell voltages only at full charge by dissipating excess energy as heat. Bulltron's active 5A balancer actively redistributes energy between cells – continuously during operation, significantly more efficiently and gently for the cells.
How long does a Bulltron LiFePO4 battery last? Bulltron LiFePO4 batteries achieve several thousand charge cycles – depending on the usage profile, a lifespan of 8–15 years or more, compared to 3–5 years for AGM or gel batteries.
Can I connect Bulltron batteries in series or parallel? Parallel connection is possible with LiFePO4 batteries with BMS, but must be carefully planned. Connecting batteries in series is also possible to achieve higher system voltages (e.g., 24 V or 48 V). We always recommend combining batteries of the same capacity and age.
Which monitors are compatible with the P-Bus interface? The P-Bus interface of Bulltron batteries is compatible with the Philippi system monitors PSS, PSM2, and PSL, as well as the entire Philippi P-Bus energy management system.
Bulltron LiFePO4 Battery · Lithium Battery Boat · Lithium Battery Yacht · LiFePO4 Motorhome · Lithium Service Battery · Active Balancer Lithium · BMS Integrated · P-Bus Lithium Battery · LiFePO4 vs AGM · Expedition Vehicle Battery · 210 Ah Lithium · Buy Bulltron Battery · Off-Grid Energy Storage
