Marine power distribution

Marine Power Distribution – DC Switch Panels and 230 V Shore Power Technology for Yachts & Boats

Onboard power distribution consists of two separate networks: the 12 or 24 V DC network for lights, navigation, pumps, and electronics, and the 230 V AC network for shore power, generator, and inverter. Philippi supplies the central switching point for both sides – circuit distributors from the 100, 200, and 700 series, as well as standard-compliant AC shore power connection and switching units. Developed and manufactured in Germany.

Brief explanation: On a boat, the DC and AC sides must be cleanly separated, each wire fused according to its cross-section, and each circuit individually switchable. Philippi switch panels use thermal circuit breakers instead of fuses: after a short circuit, the circuit is simply switched back on after the cause has been remedied – no tools, no replacement fuse.

DC Side: Circuit Distributors from Series 100, 200, and 700

Philippi DC switch panels consolidate all consumer circuits of the onboard network at one location. Each circuit receives a thermal circuit breaker and an indicator light that shows the operating status. Three product ranges cover different installation situations:

• Series 100 – compact panels with E-T-A 1140 circuit breakers (standard 8 A) and push-button reset. For smaller boats and sub-distributions.
• Series 200 – the main switch panel for sailing yachts and motorboats. Rocker circuit breakers E-T-A 3130 (standard 10 A, alternatively 6 A, 16 A, or 20 A), connection via flat receptacles 6.3 mm, up to 24 circuits, SKZ labeling sheet included.
• Series 700 – the only series for outdoor use. Waterproof rocker circuit breakers E-T-A 3131 with IP 66 protection and LED night illumination, 3 to 5 circuits, ignition-protected for boats with gasoline engines. The rocker switches are ordered separately with laser-engraved symbols, UV and saltwater resistant.

Series 100 and Series 200 are combinable and expandable horizontally and vertically due to coordinated dimensions; blank panels supplement existing panels.

Aluminum and Steel Ships: Double-Pole Version

On hulls made of aluminum or steel, the hull must not serve as a return conductor. For these ships, the Series 200 circuit distributors are available in a double-pole version with the designation STVxxx-2p. Both poles are switched and fused, enabling galvanic isolation from the hull. The 2p models have the same dimensions as the single-pole ones and can be combined with them as desired.

AC Side: Shore Power Connection, Switching, and Grid Monitoring

For the 230 V side, DIN EN ISO 13297 requires a double-pole miniature circuit breaker and a residual current device with a 30 mA tripping current. Philippi uses combined RCBo circuit breakers for this purpose, which unite personal protection, overload, and short-circuit protection in one device.

The marine range includes shore power connection units LAE for one input source – as panel mount, in a splash-proof plastic housing, or in the panel mount format of Series 200 – as well as automatic switching units LAU for onboard networks with multiple sources. The LAU units measure the input voltage and only switch to the onboard network when the nominal voltage is stable; a generator is therefore only connected after it has started up. The AC side is supplemented by the LAR grid control panel and measuring instruments for voltage, current, temperature, and operating hours.

Refit and Custom Manufacturing

In addition to the standard product range, Philippi manufactures switch panels completely according to customer specifications: equipment, ampere values, dimensions, integrated battery, tank, and P-Bus monitors, sockets, labeling language, and single or double-pole version. For Bavaria yachts, pre-assembled refit panels are also available, which dimensionally replace the original panel.

DC Series Comparison

Frequently Asked Questions about Onboard Power Distribution

Which Philippi switch panel is suitable for the cockpit? Exclusively Series 700. With IP 66 protection, it is the only series for outdoor use; Series 100 and Series 200 are designed for protected interior areas.

Which switch panel do I need for an aluminum or steel ship? The double-pole version of Series 200 (STVxxx-2p). It switches and fuses both poles, thus enabling galvanic isolation from the hull.

Which standard applies to shore power connections on boats? DIN EN ISO 13297. It requires double-pole circuit protection and a residual current device with a 30 mA tripping current. Philippi shore power connection units meet this requirement via combined RCBo circuit breakers.

What is the difference between LAE and LAU? LAE units are designed for one input source, usually shore power from the dock. LAU units automatically switch between multiple sources – shore power, generator, and inverter.

Do I have to replace a fuse after a short circuit? No. Philippi switch panels work with thermal circuit breakers. After remedying the cause, the circuit is reactivated by pressing the reset button (Series 100) or re-engaging the rocker (Series 200 and 700).

Can I combine several panels? Yes. The dimensions of Series 100 and 200 are coordinated, so that panels can be assembled horizontally and vertically to form a system and later expanded. Blank panels cover empty spaces.

Yacht power distribution · Philippi boat switch panel · STV Series 100 200 700 circuit distributor · double-pole switch panel steel ship · waterproof switch panel IP 66 cockpit · LAE shore power unit · LAU switching unit · RCBo 30 mA · DIN EN ISO 13297 · 12V 24V onboard network · Bavaria Refit Panel · Philippi electrical systems