Navigation light monitoring.
Monitors up to six navigation lights.
A navigation light monitor reports when a navigation light fails. The philippi POS 6 navigation light monitoring module monitors up to six lights, such as port, starboard, stern, masthead, anchor and tricolour light, and detects the failure of a bulb or LED as well as a broken cable. It is complemented by a conversion module for older panels and an acoustic signal transmitter.
All products. 5 items.
Navigation Light Monitoring Module POS 6 E for Panel Mounting
149,00 €
Navigation Light Monitoring Module POS 6
135,00 €
Acoustic Signal Transmitter AS 100
11,00 €
Navigation Light Monitor Sailboat POS-SY
206,00 €
Navigation Light Monitor Motorboat POS-MY
208,00 €Navigation light monitoring on board
In short: For a new or custom monitoring system, use the POS 6. An existing philippi POS-SY panel with alarm can be converted to detect LED navigation lights by swapping in the POS 6 E module.
The range
- POS 6: monitoring module with separate electronics for up to six lights, for bulbs and LEDs, also in mixed operation. If a light fails, the assigned indicator light flashes and an acoustic signal sounds, which you acknowledge with a button.
- POS 6 E: panel-mount module for converting older POS-SY panels, with indicator LEDs.
- AS 100: acoustic signal transmitter with 75 dB/1 m for DC 12 V or DC 24 V, for your own alarm and warning circuits.
Ready-made display panels with vessel symbol for the switch panel: the POS-SY navigation light monitor for sailing yachts with integrated POS 6 monitoring electronics and the POS-MY navigation light monitor for motor yachts, supplied with POS 6 monitoring electronics that are mounted separately.
| POS 6 technical data | Value |
|---|---|
| Rated voltage | DC 10–30 V |
| Monitoring channels | 6, with alarm |
| Current rating | 3 A per output |
| Light output | 0.2–36 W at 12 V, 0.5–72 W at 24 V |
| Dimensions | L 88 x W 126 x H 27 mm |
If more than six lights need to be monitored, use several POS 6 in parallel. Panels with navigation light monitoring for commercial vessels can be found under switch panels for commercial shipping.
Frequently asked questions. Answered briefly.
What does the POS 6 navigation light monitoring module monitor?
The POS 6 monitors up to six lights at the same time: port, starboard, stern, masthead, anchor and tricolour. It detects failure of the light source and a broken cable, for both LED and incandescent lights. If a light fails, its indicator flashes and an acoustic signal sounds, which can be acknowledged with a button.
Can I retrofit navigation light monitoring?
Yes. The POS 6 can be retrofitted into existing systems without replacing the existing lights or wiring. It works with DC 10 to 30 V, i.e. in 12 V and 24 V systems, and each output can carry up to 3 A. If more than six lights are to be monitored, several modules are used in parallel.
My old POS-SY panel does not detect LED lights. What can I do?
For older POS-SY navigation light panels with alarm there is the POS 6 E retrofit module. It replaces the old monitoring electronics in the panel so that LED navigation lights are also detected reliably. The panel itself stays in place, and no extensive rewiring is needed. Indicator LEDs show the status of the monitored lights.