philippi navigation light monitoring module POS 6
philippi · Navigation light monitoring
Navigation Light Monitoring Module POS 6
The POS 6 navigation light monitoring module is a philippi module for monitoring navigation lights in the on-board electrical system of yachts, which monitors up to six navigation lights simultaneously and immediately reports the failure of a light bulb, LED, or a cable interruption. It is suitable for 12V and 24V on-board electrical systems.
- For LED and incandescent navigation lights
In detail. Navigation Light Monitoring Module POS 6.
- Safety in the dark: functioning navigation lights are mandatory on every watercraft – the POS 6 makes a failure immediately visible and audible
- Can be retrofitted into existing systems, without replacing the existing lights or wiring
- Suitable for incandescent and LED navigation lights, also in mixed operation
- Expandable: if more than six lights need to be monitored, multiple POS-6 modules can be used in parallel
Functioning navigation lights in the dark are a fundamental safety requirement for every watercraft. The philippi POS 6 simultaneously monitors up to six lights – port, starboard, stern, masthead, anchor, and tricolor lights – and detects both the failure of the light source and a cable interruption. When functioning correctly, assigned LEDs on the display show the status of each light; if a light fails, the corresponding indicator light flashes and an audible signal sounds, which can be acknowledged via a button.
The POS 6 navigation light monitoring module can be retrofitted into existing systems at any time and is suitable for setting up individual navigation light monitoring systems with separate electronics. If more than six lights are required, multiple modules can be used in parallel. The POS 6 is also the electronic basis for numerous philippi Series 100 and 200 circuit distributors, which offer integrated navigation light monitoring with an alarm.
Can be used for 12V and 24V on-board electrical systems; for retrofitting custom navigation light displays, the POS 6 can be used as a standalone monitoring module. For converting older POS-SY panels, philippi also offers the POS 6 E module.
Original equipment quality
- Individually tested: every unit is connected and tested in a test environment in Remseck.
- Brand-name components, as in series production for boatyards.
- Repairable for decades: spare parts up to 30 years back, own repair centre.
Technical data
| Feature | Value |
|---|---|
| Rated voltage | DC 10–30 V |
| Monitoring channels | 6, with alarm |
| Current carrying capacity | 3 A per output |
| Light power | 0.2–36 W at 12 V or 0.5–72 W at 24 V |
| Response current | 10 mA |
| Voltage drop | max. 0.1 V (at 3 A) |
| Own power consumption | 10 mA (12 V), 20 mA (24 V) |
| Dimensions | L 88 x W 126 x H 27 mm |
| Item no. | 080006060 |
Manufacturer and product safety
philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de
Safety information: see the operating manual and data sheet.
Frequently asked questions. Answered briefly.
How many navigation lights can the POS 6 monitor simultaneously?
Up to six lights simultaneously, e.g., port, starboard, stern, masthead, anchor, and tricolor lights.
What happens if a light fails?
The assigned indicator light flashes and an audible signal also sounds, which can be acknowledged via a button.
Can I monitor more than six lights?
Yes, multiple POS-6 modules can be used in parallel for this purpose.
Does the POS 6 work with LED and incandescent navigation lights in a mixed setup?
Yes, the monitoring is suitable for incandescent and LED navigation lights, even in mixed operation.
Can the POS 6 be retrofitted into an existing system?
Yes, the module can be easily retrofitted into existing navigation light systems at any time.
Goes well with it. Accessories and add-ons.
Prefer a quick chat?
Tell us what you are planning. We will tell you honestly what you need and what you don’t.
