Philippi P-BUS System Monitor PSL, Hauptansicht 5 Zoll Touchscreen
philippi · Digital Switching
P-BUS System Monitor PSL
The philippi P-BUS System Monitor PSL is an onboard monitor with a 5" color touchscreen that displays and controls all available data from the electrical system of yachts and motorhomes on three freely customizable screen pages – from battery and tank to energy flow and consumer control. It runs on 8–32 V DC and is part of the open P-BUS system.
- The large P-bus monitor
- Easy installation without a computer
In detail. P-BUS System Monitor PSL.
- Three screen pages (Information, Energy, Control) instead of multiple individual displays
- Arrangement of display elements freely customizable, just like on a smartphone
- Capacitive touchscreen with Gorilla Glass; brightness sensor automatically adjusts display brightness
- Data recording on SD card for later analysis
- Open, expandable system – future-proof through continuous software development
- Runs offline: own software, running locally on the display, without internet and independent of Android and iOS
P-Bus terminators included: All required P-Bus terminators are supplied. You only need to add the matching P-Bus cables.
The philippi System Monitor PSL informs on its 5" color touchscreen across three pages about all available data of the electrical system: The information page shows battery, tank, temperature, and bilge data, the energy page shows the status of DC and AC systems including connected Studer or Mastervolt inverters, and on the control page, battery main switches can be operated and consumers can be switched and dimmed via the universal relay module CMR. If there are more than eight information icons, the display can be simply scrolled left or right.
Registration and configuration of P-BUS devices are done directly on the monitor without an additional computer. An M12 T-cable and both P-BUS terminators are included in the scope of delivery of the philippi PSL.
Compatibility
The philippi PSL can be combined with other P-BUS components: universal relay module CMR for consumers and LED dimming, battery management shunt SHX for battery monitoring, and tank interface CMT3 for tank level indication. Through Studer or Masterbus interfaces, the PSL also integrates combi-inverters into the energy display.
Original equipment quality
- Individually tested: every unit is connected and tested in a test environment in Remseck.
- Brand-name components, as in series production for boatyards.
- Repairable for decades: spare parts up to 30 years back, own repair centre.
Technical data
| Operating Voltage | 8–32 V DC |
|---|---|
| Current Consumption | 90 mA, Stand-by 10 mA @ 12 V |
| Display | 5" Full-color TFT graphic display with capacitive touchscreen (Gorilla Glass) |
| Dimensions | W 157.5 x H 105 x D 35 mm |
| Cut-out Dimensions | W 140 x H 85 mm |
| Data Recording | SD card |
| Scope of Delivery | M12 T-cable, 2x P-BUS terminator |
Manufacturer and product safety
philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Deutschland
info@philippi-online.de
Safety information: see the operating manual and data sheet.
Frequently asked questions. Answered briefly.
Can I customise the PSL display?
Yes. The arrangement of the display elements on the three screen pages can be customised freely, just as you know it from a smartphone. With more than eight information symbols, you simply swipe the display left or right. The capacitive 5" touchscreen with Gorilla Glass adjusts its brightness automatically via a sensor.
What does the PSL control page offer?
On the control page you operate battery main switches and switch or dim loads via the CMR universal relay module. The information page shows battery, tank, temperature and bilge data, the energy page the status of the DC and AC system, including connected Studer or Mastervolt inverters. This lets you control and monitor the on-board electrics on one device.
What is included with the PSL?
The PSL is supplied with an M12 T-cable and both P-BUS terminators. You only need the matching P-BUS cables to connect the monitor to further components such as the SHX shunt, the CMT3 tank interface or the CMR relay module. The panel cut-out is 140 x 85 mm.
Do I need to connect a computer for setup?
No. P-BUS devices are registered and configured directly on the monitor; no additional computer is needed. The PSL runs on 8–32 V DC, so it suits 12 V and 24 V systems, and records data to an SD card. Thanks to ongoing software development, the open P-BUS system remains expandable.
Goes well with it. Accessories and add-ons.
Prefer a quick chat?
Tell us what you are planning. We will tell you honestly what you need and what you don’t.
