Shore power inlets, plugs & cables.
Shore power connectors, sockets and cables for boats and overland vehicles
A shore power connection brings 230 V from the pontoon or an external supply pillar into the on-board network: outside sits a shore power inlet (CEE inlet), plus a shore power cable with a matching coupler socket. Here you find both for sailing yachts, motorboats and expedition and off-road vehicles, in 16, 32 and 50 A: standard CEE from MENNEKES, the compact Ratio MP range in stainless steel or plastic housings and the philippi circular connector RS 692.
All products. 26 items.
Waterproof built-in socket 230 V MP16-230, stainless steel, IP 56
118,00 €
Shore power connector RS 692, 16 A, IP 66
from 46,80 €
Coupler socket MPS 16-10 for shore power, 16 A
71,00 €
Coupler socket MPS 32-16 for shore power, 32 A
89,00 €
Coupler socket MPS 50-110 for shore power, 50 A
110,00 €
Shore power cable MPC 4-25 / 6-25 / 10-25, 25 m, up to 50 A
from 347,00 €
Shore power cable Marinco-CEE MCP, 15 or 25 m
from 145,70 €
Shore power inlet MP 32-16, 32 A, stainless steel
139,00 €
Shore power inlet MP 50-10, 50 A, stainless steel
169,00 €
Shore power inlet MP 16-10 SQ, 16 A, square, stainless steel
103,00 €
Shore power inlet MP 16-10 K, 16 A, plastic
69,90 €
CEE shore power inlet CEE-GS wd, waterproof IP X7, 16 A
65,00 €
CEE inlet CEE-GSK with hinged cover, IP X4, 16 A
39,90 €
Rail clips SPC for shore power cable, 6 pieces
19,90 €
CEE coupler socket CEE-KD, 16 A, IP X4
8,80 €
CEE plug CEE-KS, 16 A, IP 54
13,80 €
Stainless steel protective bar for circular connector RS 692
22,50 €
Carrying bag MPB for shore power cable
26,70 €
CEE angled coupler socket CEE-WKD, 16 A, IP X4
27,90 €
CEE coupler socket CEE-KD wd, waterproof IP X7, 16 A
29,50 €
CEE inlet CEE-GSS with sliding cover, IP X4, 16 A
33,00 €
Type 2 appliance inlet MP T2, 32 A / 400 V
177,00 €
Shore power inlet MP 16-10, 16 A, round stainless steel
102,00 €
Shore power cable MPC 2.5 with CEE plug for MP 16-10, 15/25 m
from 186,00 €Shore power inlets, coupler sockets and shore power cables for boats and expedition vehicles
In short: a shore power connection has three parts: the inlet outside on the hull, deck or cabin wall, the cable to the pontoon or power pedestal and behind it the shore power unit with 30 mA RCBO. This category covers inlets, coupler sockets, cables and accessories; the protection is in the shore power units. How it all fits together is explained on the shore power page.
Which system fits?
- Standard CEE (blue, 2+PE, 16 A): fits every CEE pillar and common extension cables. Inlets CEE-GSK with hinged cover or CEE-GSS with sliding cover (IP X4), waterproof CEE-GS wd (IP X7) with coupler socket CEE-KD wd; plus coupler sockets CEE-KD, CEE-WKD (angled) and plug CEE-KS for building your own cable.
- Ratio MP range (16, 32, 50 A): compact inlets in stainless steel or plastic housings: 16 A as MP 16-10 stainless, MP 16-10 SQ (square) or MP 16-10 K (plastic, white/black), all IP 56 and cut-out Ø 48 mm; 32 A MP 32-16, 50 A MP 50-10. The counterparts are the coupler sockets MPS 16-10, MPS 32-16 and MPS 50-110 or ready-made cables.
- philippi RS 692: the shore power connector (16 A, 2+PE, IP 66) with flange plug and coupler socket, with or without angled housing; plus the stainless steel protective bar.
Shore power cables: ready-made
- MPC 2.5: for MP 16-10, 3 × 2.5 mm², 15 or 25 m, CEE plug and coupler with indicator lamp.
- MP-CEE: CEE extension for standard CEE inlets, 3 × 2.5 mm², 15 or 25 m.
- MPC 4-25 / 6-25 / 10-25: 25 m for 25, 32 or 50 A.
- Marinco-CEE cable MCP: with moulded Marinco coupler NEMA L5-30, 3 × 2.5 mm², 15 or 25 m.
All Ratio cables use yellow PUR cable H07BQ-F, which is easy to see on pontoons and at supply pillars. Accessories: rail clips SPC and carrying bag MPB. Also in the Ratio range: the waterproof Schuko socket MP16-230 (IP 56) for deck or outer wall, and the charging inlets MP T2 (Type 2) and MP CCS 10.
All inlets and coupler sockets compared
| Model | Function | Current | Protection |
|---|---|---|---|
| CEE-GSK / CEE-GSS | CEE inlet, hinged or sliding cover | 16 A | IP X4 |
| CEE-GS wd | CEE inlet, waterproof | 16 A | IP X7 |
| CEE-KD / CEE-WKD / CEE-KS | Coupler socket straight / angled, plug | 16 A | IP X4 |
| CEE-KD wd | Coupler socket, waterproof | 16 A | IP X7 |
| MP 16-10 (stainless, SQ, K) | Ratio inlet | 16 A | IP 56 |
| MP 32-16 / MP 50-10 | Ratio inlet, stainless steel | 32 A / 50 A | – |
| MPS 16-10 / 32-16 / 50-110 | Ratio coupler socket for own cables | 16 / 32 / 50 A | IP 44 |
| RS 692 | philippi circular connector | 16 A | IP 66 |
| MP16-230 | Schuko built-in socket | 16 A | IP 56 |
Shore power on an expedition vehicle
On an expedition or off-road vehicle with living cabin, the CEE inlet sits outside on the cabin or body. The MP 16-10 inlets with IP 56 only need a cut-out of Ø 48 mm and 52 mm installation depth; if you want to use standard cables at every pillar, choose a CEE inlet with cover. Inside follows a shore power unit with RCBO. DIN VDE 0100-721 applies to vehicles with living quarters, DIN EN ISO 13297 to boats.
Standard and safety
According to DIN EN ISO 13297, the 230 V shore connection on board needs double-pole overcurrent protection and 30 mA residual current protection. An indicator for reversed polarity and an interrupted protective earth is recommended. The shore power unit takes on these tasks; inlets and cables provide a safe, watertight connection up to it. If the cable from the inlet to the unit is longer than 3 m, the circuit breaker LAE 205 belongs close to the inlet.
Frequently asked questions. Answered briefly.
Shore power inlet or shore power unit: what do I need?
Both. The inlet outside takes the shore power cable; the shore power unit inside protects the on-board network with a 30 mA RCBO. Inlets, coupler sockets and cables are in this category, the protection in the shore power units. If the cable between inlet and unit is longer than 3 m, the circuit breaker LAE 205 goes close to the inlet.
Which shore power cable do I need?
The cable must match the inlet on board and the current. For 16 A there are ready-made cables with 3 x 2.5 mm² in 15 or 25 m: MPC 2.5 for the MP 16-10 inlet, MP-CEE for standard CEE inlets. For 25, 32 and 50 A there are the MPC cables with 4, 6 or 10 mm² in 25 m.
Which shore power inlet suits an expedition vehicle?
An inlet sits outside on the living cabin or body. If you want to use standard CEE cables at every pillar, choose the CEE-GSK with hinged cover or the CEE-GSS with sliding cover. More compact is the Ratio MP 16-10 with IP 56 and a cut-out of Ø 48 mm, used with the MPC 2.5 cable. Inside follows a shore power unit with RCBO; DIN VDE 0100-721 applies to vehicles with living quarters.
Which current rating do I need for the shore connection?
Most harbours in Europe offer CEE sockets with 16 A, larger berths also 32 A or more. The size of the inlet depends on the pontoon and your power demand. The range includes inlets with 16, 32 and 50 A; the shore power cable and the coupler must match the same current rating.
Does the inlet have to be waterproof?
An inlet with a protective cap or hinged lid protects the contacts while no cable is plugged in. Depending on the location, IP X4 against splashing water is sufficient. On deck or at the stern, a waterproof version such as the IP X7 CEE-GS wd shore inlet or a Ratio MP inlet in a stainless steel housing makes sense.
Do standard CEE couplers fit the Ratio MP inlets?
No. The Ratio MP inlets are matched to their own MPS couplers; standard CEE couplers do not fit them. Matching shore power cables are available ready-made with a moulded CEE plug for the pedestal. Standard CEE inlets, on the other hand, take the usual CEE couplers without any adapter. So check which system is installed on board before you buy.
What must be installed on board behind the shore power inlet?
According to DIN EN ISO 13297, the shore connection on board needs double-pole overcurrent protection and 30 mA residual current protection, usually as an RCBO in a shore power unit. An indicator for reversed polarity and an interrupted protective earth is also recommended. In an expedition vehicle with living quarters, DIN VDE 0100-721 applies. Suitable units are in the shore power units category.