In detail. Waterproof built-in socket 230 V MP16-230, stainless steel, IP 56.

  • Stainless steel housing blends in discreetly and resists corrosion
  • IP 56 protection keeps the socket tight even against splash water
  • Same Ø 48 mm mounting hole as MP 16-10, MP 16-10 SQ and MP 16-10 K

With the same installation dimensions, philippi stocks the MP 16-10 SQ inlet with stainless steel housing and the MP 16-10 K with plastic housing.

Technical data

FeatureValue
Socket typeSchuko (230 V)
Rating16 A
HousingStainless steel
Outer diameterØ 87 mm
Mounting holeØ 48 mm
Installation depth52 mm
Protection classIP 56
Order no.7 0050 1623

Manufacturer and product safety

Ratio EV B.V. (brand Ratio Electric)
Ambachtsstraat 12
3861 RH Nijkerk
Netherlands
info@ratio.nl

Safety information: see the operating manual and data sheet.

Frequently asked questions. Answered briefly.

What are the installation dimensions of the MP16-230?

The MP16-230 has an outer diameter of Ø 87 mm, requires a mounting hole of Ø 48 mm and an installation depth of 52 mm. These are the same dimensions as the MP 16-10 inlet and the MP 16-10 SQ and MP 16-10 K. This allows socket and shore power inlet to be installed uniformly on deck.

Is the MP16-230 suitable for installation on deck?

Yes. The MP16-230 achieves protection class IP 56 and therefore stays tight even against splash water. The stainless steel housing resists corrosion and blends in discreetly on the deck of yachts. It is a Schuko socket for 230 V, rated up to 16 A, for connecting 230 V devices on board.

Which inlets match the MP16-230?

With the same installation dimensions, philippi stocks the MP 16-10 SQ inlet with stainless steel housing and the MP 16-10 K with plastic housing. Both serve as shore power inlets and, like the MP16-230 socket, need a Ø 48 mm mounting hole. This creates a uniform look of shore power inlet and socket on deck.

Can I install the MP16-230 on an expedition vehicle?

Yes. With protection class IP 56 and a stainless steel housing, the MP16-230 is suitable as an outdoor socket on the living cabin or body. Like the MP 16-10 inlet it needs a cut-out of Ø 48 mm and 52 mm installation depth, so both look uniform side by side. It is protected via an RCBO-protected circuit behind the shore power unit.

Goes well with it. Accessories and add-ons.

philippi deck gland DD 10
philippi

Deck Bushing DD 10

28,50 €

Prefer a quick chat?

Tell us what you are planning. We will tell you honestly what you need and what you don’t.

Beratung bei philippi in Remseck am Neckar