In detail. Shore power inlet MP 16-10 SQ, 16 A, square, stainless steel.

  • Square stainless steel housing for durable, corrosion-resistant outdoor installation
  • Same installation dimensions as the round MP 16-10 in stainless steel, the plastic MP 16-10 K and the Schuko socket MP 16-230, so the cut-out stays the same
  • Matching counterparts directly from philippi: coupler socket for self-assembly or ready-made shore power cable

The MP 16-10 SQ appliance inlet is permanently installed in the boat or vehicle and is the point where the shore power cable is plugged in. Protection rating IP 56 protects the connection against dust and strong water jets. In the philippi catalogue it is listed as a separate version alongside the round MP 16-10 in stainless steel and the MP 16-10 K in plastic (white or black).

philippi supplies the MP 16-10 SQ together with the matching counterparts of the Ratio series. If you want to assemble the cable yourself, choose the coupler socket MPS 16-10; if you prefer a ready-made cable, choose the shore power cable MPC 2.5 with moulded CEE plug in 15 m or 25 m. Conventional CEE coupler sockets are not compatible with the MP 16-10.

Goes with:

Technical data

Feature Value
Manufacturer Ratio
Current 16 A
Shape square
Housing stainless steel
Protection rating IP 56
Mounting hole Ø 48 mm
Installation depth 52 mm
Order no. 7 0050 1615

Manufacturer and product safety

Ratio EV B.V. (brand Ratio Electric)
Ambachtsstraat 12
3861 RH Nijkerk
Netherlands
info@ratio.nl

Safety information: see the operating manual and data sheet.

Frequently asked questions. Answered briefly.

How does the MP 16-10 SQ differ from the MP 16-10?

The MP 16-10 SQ is the square stainless steel version and is sold as a separate product. The round MP 16-10 is made of stainless steel, the MP 16-10 K of plastic in white or black. Mounting hole, installation depth and protection rating IP 56 are the same.

Which coupler socket fits the MP 16-10 SQ?

The coupler socket MPS 16-10 fits the MP 16-10 SQ for self-assembled cables. Alternatively there is the ready-made shore power cable MPC 2.5 with moulded CEE plug in 15 m or 25 m.

Can I use a standard CEE coupler socket with the MP 16-10 SQ?

No. According to the philippi catalogue, conventional CEE coupler sockets cannot be used with the MP 16-10 appliance inlet. Use the Ratio coupler socket MPS 16-10 or the MPC 2.5 cable.

What mounting hole does the MP 16-10 SQ need?

The MP 16-10 SQ is fitted into a mounting hole of Ø 48 mm; the installation depth is 52 mm. The protection rating is IP 56.

Does the MP 16-10 SQ fit the cabin of an expedition vehicle?

Yes. With IP 56, a cut-out of Ø 48 mm and 52 mm installation depth, the MP 16-10 SQ can be fitted in the wall of the living cabin or body; the square shape suits angular hatches and panels. The MPC 2.5 cable has a CEE plug for the shore power pillar at the other end. Inside follows a shore power unit with RCBO.

Goes well with it. Accessories and add-ons.

Prefer a quick chat?

Tell us what you are planning. We will tell you honestly what you need and what you don’t.

Beratung bei philippi in Remseck am Neckar