Battery connection.
Secure connection, touch-safe terminal.
The battery terminal carries the highest current in the entire on-board system, so a firm connection and a touch-safe terminal are essential. philippi offers the battery terminal clamps BK6 and BKM, battery terminal covers, rotating covers, insulating caps for threaded studs and a terminal busbar set for several outputs directly at the terminal, for 12 V and 24 V systems in boats, yachts and vehicles.
All products. 12 items.
Battery Terminal BK6
14,50 €
Battery terminal BKM
11,80 €
Blue Sea Battery Terminal Bus Bar Set
31,00 €
Blue Sea Insulation cap for threaded studs
4,17 €
Blue Sea Dual Post Cover
11,42 €
Blue Sea Cover caps BA 1 / BA 2 / BA 3
from 4,86 €
Blue Sea Battery pole cover BA 5 / BA 7
8,80 €
Battery terminal cover BA 6
3,90 €
Blue Sea Bolt Cover, Red
4,88 €
Blue Sea Battery Terminal Cover
from 6,94 €
Blue Sea Rotating Battery Terminal Covers
10,02 €
Blue Sea Dual Entry Cover Caps
18,09 €Battery connection: terminal clamps and covers for the on-board battery
The highest current in the on-board system flows at the battery terminal, so it needs a firm connection and a touch-proof cover. In this category you will find the BK6 and BKM battery clamps from philippi as well as terminal covers, cover caps, insulating caps and a battery terminal busbar set from Blue Sea Systems for boats, yachts and vehicles.
In short: Choose the cover by terminal shape and cable cross-section. The BA 5 for 25–50 mm² or the BA 7 for 50–70 mm² fits BK6 and BKM; cover individual connection studs with BA 1, BA 2 or BA 3.
The range
- Battery clamps: BK6 with M8 thread on the negative terminal and M10 thread on the positive terminal, BKM with central connection for cables up to 50 mm².
- Terminal covers: BA 5 / BA 7 and the black BA 6 for BK6 and BKM, battery clamp cover for standard automotive terminals, rotating battery terminal covers for wing nut terminals and double post cover for dual terminals.
- Studs and connection points: BA 1 / BA 2 / BA 3 cover caps in red and black, red stud cover, insulating cap for threaded studs 5/16" and 3/8" and dual entry cover caps.
- Several outputs at the terminal: battery terminal busbar set made of tinned copper for terminals with 3/8" studs (10 mm hole).
| Cover cap | Use | Cable cross-section |
|---|---|---|
| BA 1 | individual connection studs, e.g. on alternator, starter or anchor windlass | 10–25 mm² |
| BA 2 | as BA 1 | 35–70 mm² |
| BA 3 | as BA 1 | 95–120 mm² |
| BA 5 | BKM and BK6 battery clamps | 25–50 mm² |
| BA 7 | BKM and BK6 battery clamps | 50–70 mm² |
The main fuse belongs no more than 17.8 cm from the positive terminal, ideally directly on the terminal. More on this in the article Fuses on board; busbars for further distribution can be found under busbars.
Frequently asked questions. Answered briefly.
Why do I need a battery terminal cover?
The highest current in the onboard system flows at the battery post, usually with no fuse ahead of it. If a tool or loose part falls onto an open positive post, a short circuit results. Covers such as BA 1 to BA 7, rotating covers and insulating caps make the post touch-safe without obstructing the connection.
Which battery clamp fits: BK6 or BKM?
The BK6 has different connection threads, M8 on the negative and M10 on the positive post, so nothing gets mixed up when connecting. The BKM has a central connection point for neat routing of several cables and is designed for cross-sections up to 50 mm². The BA 6 terminal cover fits both.
How do I connect several cables at the battery post?
Instead of stacking cable lugs on the post, fit the Blue Sea Systems battery post busbar set directly onto posts with 10 mm (3/8 inch) studs. The tinned copper bars create extra connection points for positive and negative. In larger systems, distribution belongs on a separate busbar behind the main fuse.