philippi Landanschlusseinheit LAE 236
philippi · AC Panels
Shore power unit LAE 236
The philippi LAE 236 shore power unit is an AC distribution panel with 6 circuits for the shore power connection on yachts, matching the 200 series circuit distribution panels. Each circuit is protected by a two-pole thermal rocker circuit breaker rated 10 A for 230 V / 50 Hz.
- For safe shore power connection
In detail. Shore power unit LAE 236.
- Reliably supplies up to 6 load circuits from shore power
- Robust two-pole rocker circuit breakers instead of electronic components – safe even with moisture on board
- SKZ labelling set included, so circuits can be labelled clearly straight away
- Exact panel cut-out saves effort when mounting the switch panel
The LAE 236 safely distributes the incoming shore power to several load circuits on board. The load cables are connected via 6.3 mm flat receptacles on the back of the rocker circuit breakers; the supplied supply cables are 70 cm long. This allows the panel to be integrated quickly into the electrics of yachts with 200 series panels.
The philippi LAE 236 shore power unit is supplied with an SKZ labelling set (for boats) and black fixing screws; a set for vehicles (SKZ-MOBIL) is also available on request. The panel must be installed so that the back is covered and only accessible with tools.
Matches 200 series circuit distribution panels; SKZ and SKZ-MOBIL labelling sets are available as additions.
Original equipment quality
- Individually tested: every unit is connected and tested in a test environment in Remseck.
- Brand-name components, as in series production for boatyards.
- Repairable for decades: spare parts up to 30 years back, own repair centre.
Technical data
| Feature | Value |
|---|---|
| Circuits | 6, each 10 A / 230 V, 50 Hz |
| Circuit breakers | two-pole thermal rocker circuit breakers |
| Connection | 6.3 mm flat receptacles, 70 cm supply cable |
| Dimensions (W x H x D) | 105 x 210 x 70 mm |
| Panel cut-out | 81 x 186 mm (12 mm smaller per edge) |
| Art. no. | 0 1000 2362 |
Manual
Read the manual onlineManufacturer and product safety
philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Deutschland
info@philippi-online.de
Safety information: see the operating manual and data sheet.
Frequently asked questions. Answered briefly.
Does the LAE 236 need a residual current device upstream?
Yes. A residual current device (RCBO) must always be installed upstream of the LAE 236 shore power unit. The LAE 236 itself distributes shore power to 6 circuits via two-pole thermal rocker circuit breakers rated 10 A each, but it does not replace residual current protection. We will be happy to advise you on protecting your shore power connection.
How many circuits does the LAE 236 have?
The LAE 236 has 6 circuits for AC 230 V / 50 Hz. Each circuit is protected by a two-pole thermal rocker circuit breaker rated 10 A. The load cables are connected via 6.3 mm flat receptacles on the back, and the supplied supply cables are 70 cm long.
How large does the panel cut-out for the LAE 236 need to be?
The LAE 236 measures 105 x 210 x 70 mm (W x H x D). The panel cut-out may be 12 mm smaller per edge than the panel, i.e. 81 x 186 mm. Install the panel so that the back is covered and only accessible with tools. The black fixing screws are included in the scope of delivery.
Is a labelling set included with the LAE 236?
Yes. The LAE 236 comes with an SKZ labelling set for boats and black fixing screws. For vehicles, the SKZ-MOBIL set is also available. This lets you label the 6 circuits clearly right after installation. The LAE 236 matches the philippi 200 series circuit distribution panels.
Goes well with it. Accessories and add-ons.
Prefer a quick chat?
Tell us what you are planning. We will tell you honestly what you need and what you don’t.
