Ready-made battery cable with crimped cable lugs by philippi
philippi · Cable
Battery cable 25 mm² made up, Weldyflex with cable lugs
The philippi 25 mm² battery cable is a ready-made Weldyflex high-current cable with a crimped tube cable lug at both ends. Laid freely, 25 mm² carries up to 120 A, bundled up to 90 A. You choose length, colour and lug hole; we crimp the cable in Remseck and deliver it ready to install for boats and expedition vehicles.
Key figures: Battery cable 25 mm² made up, Weldyflex with cable lugs
- 120 A laid freely
- 90 A bundled
- 25 mm² Weldyflex, fine-stranded
- 1–5 days made in Remseck
In detail. Battery cable 25 mm² made up, Weldyflex with cable lugs.
Original equipment quality
- Individually tested: every unit is connected and tested in a test environment in Remseck.
- Brand-name components, as in series production for boatyards.
- Repairable for decades: spare parts up to 30 years back, own repair centre.
Technical data
| Feature | Value |
|---|---|
| Cable | Weldyflex RT/SW, single-core, highly flexible |
| Cross-section | 25 mm² |
| Current capacity | 120 A laid freely, 90 A bundled |
| Lengths | 0.5 / 1 / 1.5 / 2 / 3 m, other lengths in the configurator |
| Termination | Tube cable lug RKS, tinned E-Cu, hole 8 mm or 10 mm, at both ends |
| Rated voltage of cable | 100 V |
| Temperature range | –25 °C to +85 °C, flame-retardant |
| Use | Boat, yacht, expedition and off-road vehicle |
| Production and delivery | made up to order in Remseck, delivery in 1–5 days |
Manufacturer and product safety
philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de
Safety information: see the operating manual and data sheet.
Frequently asked questions. Answered briefly.
Different length, battery clamp or in-line fuse?
In the cable configurator you put together your 25 mm² battery cable freely: length to measure, each end individually with cable lug or battery clamp, and if required a matching in-line fuse and negative cable. The configurator checks cross-section and voltage drop for your run and shows the parts list with price.
How long can a 25 mm² cable be?
The table shows the maximum cable length (one way, positive and negative of equal length) for a voltage drop of no more than 3 %, calculated for copper. If your run is longer, choose 35 mm². For your own values use the cable cross-section calculator.
What does a 25 mm² battery cable cost?
At 1 m length €17.60 including both cable lugs and crimping. The price is made up of the price per metre of Weldyflex 25 mm² (€11.60/m) and the make-up flat rate of €6.
Is 25 mm² enough for my current?
Up to 120 A laid freely, up to 90 A in a bundle or cable duct. Length matters too, see the table above. Choose the fuse to match the cable, not the load.
Which fuse belongs on the battery cable?
Every cable connected directly to the battery needs its own fuse as close as possible to the positive terminal. Which type fits is explained in the guide Main fuse at the battery.
Prefer a quick chat?
Tell us what you are planning. We will tell you honestly what you need and what you don’t.
