Key figures: Battery cable 50 mm² made up, Weldyflex with cable lugs

  • 210 A laid freely
  • 160 A bundled
  • 50 mm² Weldyflex, fine-stranded
  • 1–5 days made in Remseck

In detail. Battery cable 50 mm² made up, Weldyflex with cable lugs.

Original equipment quality

  • Individually tested: every unit is connected and tested in a test environment in Remseck.
  • Brand-name components, as in series production for boatyards.
  • Repairable for decades: spare parts up to 30 years back, own repair centre.
How we manufacture

Technical data

FeatureValue
CableWeldyflex RT/SW, single-core, highly flexible
Cross-section50 mm²
Current capacity210 A laid freely, 160 A bundled
Lengths0.5 / 1 / 1.5 / 2 / 3 m, other lengths in the configurator
TerminationTube cable lug RKS, tinned E-Cu, hole 8 mm or 10 mm, at both ends
Rated voltage of cable100 V
Temperature range–25 °C to +85 °C, flame-retardant
UseBoat, yacht, expedition and off-road vehicle
Production and deliverymade up to order in Remseck, delivery in 1–5 days

Manufacturer and product safety

philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de

Safety information: see the operating manual and data sheet.

Frequently asked questions. Answered briefly.

Different length, battery clamp or in-line fuse?

In the cable configurator you put together your 50 mm² battery cable freely: length to measure, each end individually with cable lug or battery clamp, and if required a matching in-line fuse and negative cable. The configurator checks cross-section and voltage drop for your run and shows the parts list with price.

How long can a 50 mm² cable be?

The table shows the maximum cable length (one way, positive and negative of equal length) for a voltage drop of no more than 3 %, calculated for copper. If your run is longer, choose 70 mm². For your own values use the cable cross-section calculator.

What does a 50 mm² battery cable cost?

At 1 m length €34.70 including both cable lugs and crimping. The price is made up of the price per metre of Weldyflex 50 mm² (€22.70/m) and the make-up flat rate of €12.

Is 50 mm² enough for my current?

Up to 210 A laid freely, up to 160 A in a bundle or cable duct. Length matters too, see the table above. Choose the fuse to match the cable, not the load.

Which fuse belongs on the battery cable?

Every cable connected directly to the battery needs its own fuse as close as possible to the positive terminal. Which type fits is explained in the guide Main fuse at the battery.

Prefer a quick chat?

Tell us what you are planning. We will tell you honestly what you need and what you don’t.

Beratung bei philippi in Remseck am Neckar