Ready-made cable with crimped cable lugs by philippi
philippi · Cable
Cable 10 mm² made up, H07V-K with tube cable lugs
The philippi 10 mm² cable is a ready-made, finely stranded single-core H07V-K wire. Laid freely it carries 10 mm² up to 65 A. You choose wire, length, colour and ends; we crimp in Remseck and deliver ready to install for DC-DC chargers, inverters up to about 500 W at 12 V and sub-distribution on boats and expedition vehicles.
Key figures: Cable 10 mm² made up, H07V-K with tube cable lugs
- 65 A 10 mm² laid freely
- H07V-K also tinned
- 1–5 days made in Remseck
In detail. Cable 10 mm² made up, H07V-K with tube cable lugs.
Current and length
Maximum cable length (one way, positive and negative of equal length) at full bundled load and no more than 3 % voltage drop, calculated for copper. For your own values use the cable cross-section calculator.
| Cross-section | laid freely | bundled | max. length 12 V | max. length 24 V |
|---|---|---|---|---|
| 10 mm² | 65 A | 50 A | 2.1 m | 4.1 m |
Original equipment quality
- Individually tested: every unit is connected and tested in a test environment in Remseck.
- Brand-name components, as in series production for boatyards.
- Repairable for decades: spare parts up to 30 years back, own repair centre.
Technical data
| Feature | Value |
|---|---|
| Wire | H07V-K, single-core, finely stranded; tinned version H07V-K-VZ |
| Cross-section | 10 mm² |
| Lengths | 0.5 / 1 / 1.5 / 2 / 3 m, other lengths in the configurator |
| Colours | red, black |
| Ends | cable lug 6 mm hole both ends, cable lug 8 mm hole both ends, cable lug 10 mm hole both ends |
| Use | Boat, yacht, expedition and off-road vehicle |
| Production and delivery | made up to order in Remseck, delivery in 1–5 days |
Manufacturer and product safety
philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de
Safety information: see the operating manual and data sheet.
Frequently asked questions. Answered briefly.
Different length, mixed ends or in-line fuse?
In the cable configurator you put together your cable freely: length to measure, each end individually, and if required a matching fuse and negative cable. The configurator checks cross-section and voltage drop and shows the parts list with price.
What does the cable cost?
From €7.85 for 0.5 m, including both ends and crimping. The price is made up of the price per metre of the wire and the make-up flat rate of €6.
When do I need the tinned wire?
Wherever moisture and salt air reach the strands, for example in the bilge or outdoors. Tinned copper oxidises much more slowly.
Need more current?
From 16 mm² there are ready-made battery cables with tube cable lugs.
Prefer a quick chat?
Tell us what you are planning. We will tell you honestly what you need and what you don’t.
