In detail. Tank Probes TDS / TDN 200.

Your benefits.

  • Precise measurement via hydrostatic pressure, independent of tank shape
  • Automatic pressure compensation prevents measurement errors caused by air pressure fluctuations
  • Suitable for diesel, water, waste water and black water tanks (not for petrol/kerosene/paraffin, EEx zone)
  • Supplied with mounting flange
  • Compatible with TCS/BTM/VTM tank monitors, CMT3 tank interface and UTI interface

Developed and manufactured in Germany.

Original equipment quality

  • Individually tested: every unit is connected and tested in a test environment in Remseck.
  • Brand-name components, as in series production for boatyards.
  • Repairable for decades: spare parts up to 30 years back, own repair centre.
How we manufacture

Technical data

FeatureValue
ApplicationSubmersible probe
Tank media TDS 200Diesel, water, waste water, black water
Tank media TDN 200Water, waste water, black water
Measuring range0–200 mbar
Resolution1 cm
Max. tank height200 cm
Output signalDC 4–20 mA, 2-wire
Operating voltage10–30 V DC via measuring cable
Operating temperature0–40 °C
Probe housingStainless steel 1.4404 (316L, V4A)
CableBlack PUR, 2.5 m, oil-resistant
DimensionsL 97 mm, Ø 22 mm
Weightapprox. 0.2 kg without cable

Manufacturer and product safety

philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de

Safety information: see the operating manual and data sheet.

Frequently asked questions. Answered briefly.

What is the difference between TDS 200 and TDN 200?

The difference lies in the permitted tank media. The TDS 200 is suitable for diesel, water, waste water and black water, the TDN 200 for water, waste water and black water. Both measure tank heights up to 200 cm with 1 cm resolution and have a housing made of stainless steel 1.4404 (316L). Neither sensor is suitable for petrol, kerosene or paraffin.

How accurately does the tank sensor measure?

The sensor measures the level via the hydrostatic pressure of the liquid with a resolution of 1 cm, a measuring range of 0 to 200 mbar and a maximum tank height of 200 cm. Because the probe hangs at the bottom of the tank, the measurement is independent of the tank shape. The operating temperature range is 0 to 40 °C.

Which displays is the tank sensor compatible with?

The TDS / TDN 200 tank sensors provide a 4 to 20 mA output signal using the 2-wire principle. They work with the philippi TCS, BTM and VTM tank monitors, with the CMT3 tank interface and, via the UTI interface, also with analogue round gauges. The sensor is supplied with 10 to 30 V DC via the measuring cable.

How is distortion caused by air pressure prevented?

The 2.5 m PUR connection cable contains a thin air tube for pressure compensation at the rear. This automatically compensates for fluctuations in air pressure, so they do not distort the measured level. The black PUR cable is oil-resistant, and the probe itself has a stainless steel housing. A mounting flange is included in the scope of delivery.

Goes well with it. Accessories and add-ons.

philippi water tank sender TGW – dip-tube sender
philippi

TGW water tank sender

from 126,70 €
Fuel tank sender TGT – dip-tube sender for diesel and petrol tanks
philippi

TGT fuel tank sender

from 119,50 €
philippi 3.5-inch tank monitor VTM 2 for up to 4 tanks
philippi

Tank Monitor 3.5" VTM 2

249,00 €
BTM2 display for battery and tank monitoring – front view
philippi

Battery Tank Monitor BTM2

285,00 €
philippi contactless ultrasonic level measurement UTV
philippi

Ultrasonic tank sender UTV, contactless level measurement

115,00 €
philippi screw-in tank probe TDT-10-250
philippi

Screw-in Tank Probe TDT-10-250

299,00 €
philippi tank sensor GOBIUS C with analogue output
Gobius

Tank Sensor Gobius C

389,00 €
philippi tank sensor GOBIUS PRO for side mounting
Gobius

Side-Mount Tank Sensor GOBIUS PRO

179,00 €

Prefer a quick chat?

Tell us what you are planning. We will tell you honestly what you need and what you don’t.

Beratung bei philippi in Remseck am Neckar