In detail. Tank Sensor Gobius C.

  • Plug-and-play installation without tank removal
  • Connection to analog instruments: 0–190 Ohm, 240–33 Ohm, 4–20 mA, and 0–5 V
  • Suitable for all liquid types, even through plastic tanks
  • Two separate input/output alarms for empty or full tank
  • Integrated tank calculator and wave damping
  • Maintenance-free, app available in 10 languages

Scope of delivery: Sensor, cable, 3M cleaning wipe, and additional 3M sensor adhesive tape.

  • Operating voltage: DC 9–30 V
  • Current consumption (standby): 20 mA @ 12 V
  • Resolution/accuracy: ±2–3 mm
  • Protection class: IP44
  • Weight: 65 g
  • Dimensions: L 65 x W 95 x H 65 mm
  • Maximum tank depth: 2 m
  • Adaptable to standard bores in metal tanks (1 1/4″)

Frequently Asked Questions

What matters in a tank sensor.

  • Stepless and steady: micro radar measures more than once per second to approx. ±2–3 mm. According to the manufacturer, foam, vapour, temperature and pressure do not affect the reading, and wave damping filters out sea motion and vehicle movement.
  • Four signals in one sensor: 0–190 Ω, 240–33 Ω, 4–20 mA and 0–5 V. The Gobius C therefore fits many existing instruments, including displays and controllers with a 4–20 mA input.
  • Two alarm outputs: for full and empty tank, independent of the smartphone.
  • Any tank shape: the tank calculator in the Gobius app calculates the volume even for slanted, tapered and irregular tanks.
  • An app that adds value: Bluetooth app in 10 languages, notifications for full and empty tanks, Gobius View for sharing with several smartphones. According to the manufacturer, it can also connect to Victron Cerbo GX and Ekrano GX via Bluetooth.
  • Experienced manufacturer: Gobius Sensor Technology AB from Sweden has been developing tank level sensors since 2008. Advice and service are available from philippi in Remseck: +49 7146 87 44 0.

Technical data

SensorMountingMeasurementDisplay
Gobius Proglued to the side from outside, no drillingreports whether there is liquid at sensor height; up to 8 sensors per tankBluetooth app, 2 switching contacts
Gobius C Basicon top of the tankstepless, ±2–3 mm, tank depth up to 2 manalogue gauge 10–180 Ω
Gobius Con top of the tankstepless, ±2–3 mm, tank depth up to 2 manalogue instruments (0–190 Ω, 240–33 Ω, 4–20 mA, 0–5 V), 2 alarms
Gobius C NMEA 2000on top of the tankstepless, ±2–3 mm, tank depth up to 2 mchart plotter via NMEA 2000

Manufacturer and product safety

Gobius Sensor Technology AB
Ljungåsvägen 2
302 91 Halmstad
Sweden
info@gobius.se

Safety information: see the operating manual and data sheet.

Frequently asked questions. Answered briefly.

Do I have to open or remove the tank for installation?

No, the sensor measures from above through the tank wall, without removing the tank and without the risk of leaks.

Which display instruments can I connect the Gobius C to?

To common analog instruments such as KUS, Wema, VDO, or Faria with signals 0–190 Ohm, 240–33 Ohm, 4–20 mA, or 0–5 V.

Does the sensor offer an alarm function?

Yes, it has two separate input/output alarms for empty or full tank.

What does the Gobius C offer that a simple radar tank sender does not?

The Gobius C outputs four signal types from one sensor: 0–190 Ω, 240–33 Ω, 4–20 mA and 0–5 V. It adds two alarm outputs for full and empty tanks, a tank calculator for any tank shape and wave damping. It therefore fits existing instruments and reports critical levels even without a smartphone.

How reliably does the sensor measure in rough seas and with foam?

The sensor uses micro radar to measure more than once per second from above through the tank wall. According to the manufacturer, foam, vapour, temperature and pressure do not affect the measurement. Wave damping filters out movement from rough seas, and in expedition vehicles also on bumpy roads. The display stays steady and the level is correct.

Which Gobius suits your tank?

Plastic or GRP tank: the Gobius C is glued on top and measures through the wall without drilling. Metal tank: the Gobius C sits in an opening of approx. 40 mm with the mounting adapter, for example the opening of an old sender. The Gobius Pro fits steel and stainless steel (1–3 mm wall), aluminium (2–5 mm), PE (2–10 mm) and GRP (4–8 mm). Not sure? The tank sender finder helps, or call us: +49 7146 87 44 0.

Goes well with it. Accessories and add-ons.

philippi panel with rocker switch TAN 101
philippi

Panel with Rocker Switch TAN 101

23,00 €
philippi P-Bus NMEA interface CBN
philippi

P-Bus NMEA Interface CBN

209,00 €
philippi P-BUS system monitor PSM3, front view
philippi

P-BUS System Monitor PSM3

369,00 €
philippi battery monitor BLS set with shunt SHE 348
philippi

Battery Monitor BLS Set

265,00 €

Prefer a quick chat?

Tell us what you are planning. We will tell you honestly what you need and what you don’t.

Beratung bei philippi in Remseck am Neckar