In detail. Side-Mount Tank Sensor GOBIUS PRO.

  • No drilling in the tank: the sensor sits on the outside and has no contact with the medium, so it does not get dirty.
  • Level display via app on your smartphone, up to 8 sensors per tank
  • 2 switching contacts on the sensor, e.g. for controlling a remote status display
  • Available as a set with several sensors on request

What matters in a tank sensor.

  • No hole, even on metal tanks: sensors that measure from above need an opening in metal tanks. The Gobius Pro is glued to the outside of the tank wall, on steel, stainless steel, aluminium, PE and GRP.
  • Several level stages: up to 8 sensors per tank, each reporting whether there is liquid at its height.
  • Switches on its own: 2 switching contacts on the sensor, for example for a remote status display.
  • No contact with the medium: nothing gets dirty, nothing leaks.
  • Experienced manufacturer: Gobius Sensor Technology AB from Sweden has been developing tank level sensors since 2008. Multi-sensor sets and advice from philippi in Remseck: +49 7146 87 44 0.

Technical data

FeatureValue
Order no.7 0097 0481
Mountingglued on the side from the outside, no drilling
Nominal voltage12 V / 24 V
Current consumption100 mA active, 10 mA (idle)
Output signalswitching output, Bluetooth
Sensor dimensionsH 26 mm, Ø 70 mm
Steel / stainless steelwall thickness 1–3 mm
Aluminiumwall thickness 2–5 mm
Plastic (polyethylene)wall thickness 2–10 mm
Fibreglasswall thickness 4–8 mm

Manufacturer and product safety

Gobius Sensor Technology AB
Ljungåsvägen 2
302 91 Halmstad
Sweden
info@gobius.se

Safety information: see the operating manual and data sheet.

Frequently asked questions. Answered briefly.

Does a hole have to be drilled in the tank for the GOBIUS PRO?

No. The sensor is glued to the side of the tank from the outside and detects the liquid acoustically through the tank wall.

Which tank materials is the sensor suitable for?

For steel and stainless steel with 1–3 mm wall thickness, aluminium with 2–5 mm, polyethylene with 2–10 mm and fibreglass with 4–8 mm.

When is the Gobius Pro the better choice?

When you cannot or do not want to drill into the tank, for example metal tanks without an existing sender opening. The Gobius Pro is glued to the outside of the tank wall and reports whether there is liquid at its height. With up to eight sensors per tank and two switching contacts, it suits level stages and alarms.

Which Gobius suits your tank?

SensorMountingMeasurementDisplay

Gobius Proglued to the side from outside, no drillingreports whether there is liquid at sensor height; up to 8 sensors per tankBluetooth app, 2 switching contacts

Gobius C Basicon top of the tankstepless, ±2–3 mm, tank depth up to 2 manalogue gauge 10–180 Ω

Gobius Con top of the tankstepless, ±2–3 mm, tank depth up to 2 manalogue instruments (0–190 Ω, 240–33 Ω, 4–20 mA, 0–5 V), 2 alarms

Gobius C NMEA 2000on top of the tankstepless, ±2–3 mm, tank depth up to 2 mchart plotter via NMEA 2000

Plastic or GRP tank: the Gobius C is glued on top and measures through the wall without drilling. Metal tank: the Gobius C sits in an opening of approx. 40 mm with the mounting adapter, for example the opening of an old sender. The Gobius Pro fits steel and stainless steel (1–3 mm wall), aluminium (2–5 mm), PE (2–10 mm) and GRP (4–8 mm). Not sure? The tank sender finder helps, or call us: +49 7146 87 44 0.

Goes well with it. Accessories and add-ons.

philippi 3.5-inch tank monitor VTM 2 for up to 4 tanks
philippi

Tank Monitor 3.5" VTM 2

249,00 €
philippi P-Bus AC interface CAV
philippi

P-Bus AC Interface CAV

179,00 €
philippi P-BUS secondary monitor PSS, 2.4-inch touchscreen
philippi

P-BUS Daughter Monitor PSS

229,00 €
philippi P-Bus NMEA interface CBN
philippi

P-Bus NMEA Interface CBN

209,00 €

Prefer a quick chat?

Tell us what you are planning. We will tell you honestly what you need and what you don’t.

Beratung bei philippi in Remseck am Neckar