BullTron-P-BUS-Adapter: rund 30 cm Kabel mit integriertem T-Stück
philippi · Lithium Batteries
BullTron P-BUS adapter
The BullTron P-BUS adapter connects a BullTron Polar battery to the philippi P-BUS system. The plug-and-play cable is about 30 cm long and has an integrated T-piece for connecting further P-BUS devices to the same line. The philippi PCU Control Unit then shows the battery's state of charge, voltage, current, cell voltages and temperature.
In detail. BullTron P-BUS adapter.
Your benefits
- Plug-and-play connection between BullTron Polar battery and philippi P-BUS
- Integrated T-piece: connect further P-BUS devices without an extra distributor
- Battery data in one place on the philippi PCU Control Unit
- Developed and manufactured in Germany
Compatible with
- BullTron Polar batteries with interface (not the Polar starter batteries)
- philippi PCU Control Unit
- further philippi P-BUS devices
Unsure whether the adapter suits your system? Our team will advise you personally.
Original equipment quality
- Individually tested: every unit is connected and tested in a test environment in Remseck.
- Brand-name components, as in series production for boatyards.
- Repairable for decades: spare parts up to 30 years back, own repair centre.
Technical data
| Feature | Value |
|---|---|
| Function | Connects a BullTron Polar battery to the philippi P-BUS |
| Cable length | approx. 30 cm |
| Branch | integrated T-piece |
| Display | philippi PCU Control Unit |
| Manufacturer | philippi |
Manufacturer and product safety
philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Deutschland
info@philippi-online.de
Safety information: see the operating manual and data sheet.
Frequently asked questions. Answered briefly.
What do I need the BullTron P-BUS adapter for?
The adapter integrates a BullTron Polar battery into the philippi P-BUS system. The battery then reports its data to the bus, and the philippi PCU Control Unit shows state of charge, voltage, current, cell voltages and temperature. This way you can monitor your lithium battery from one central place on board or in your vehicle.
Which BullTron batteries work with the adapter?
The adapter is intended for BullTron Polar batteries that have an interface. The Polar starter batteries have no interface and therefore cannot be integrated into the P-BUS. If you are unsure which model you have, send us the type designation from the label. We will gladly check the combination for your electrical system.
Can I connect further devices via the T-piece?
Yes. The integrated T-piece continues the P-BUS line, so you can connect further philippi P-BUS devices to the same line. You do not need an additional distributor. The cable is about 30 cm long and ready to plug in, so there is no crimping or soldering needed to integrate the battery into the bus.
Goes well with it. Accessories and add-ons.
Prefer a quick chat?
Tell us what you are planning. We will tell you honestly what you need and what you don’t.
