BullTron Polar Slim 24 V 100 Ah LiFePO4-Batterie
BullTron · BullTron LiFePO4 batteries
BullTron Polar Slim 24 V 100 Ah LiFePO4 Battery with Heating, 58 mm flat
The BullTron Polar Slim 24 V 100 Ah is a LiFePO4 battery with 100 Ah and 2,560 Wh at 25.6 V for motorhomes, campers and off-road vehicles. Its integrated heating lets it charge in frost down to −30 °C (manufacturer’s data), a smart BMS protects the cells, and via P-BUS the philippi PCU shows its state of charge. philippi is a BullTron wholesaler.
In detail. BullTron Polar Slim 24 V 100 Ah LiFePO4 Battery with Heating, 58 mm flat.
- 150 A continuous and 300 A peak current
- Integrated heating: charging down to −30 °C
- Smart BMS with 5 A active balancer
- Bluetooth app for state of charge and cell voltages
- Integration into philippi P-BUS and the PCU Control Unit
- At least 7,000 cycles at 80 % depth of discharge
- 5-year manufacturer’s warranty, extendable to 10 years
In the philippi on-board system.
All BullTron Polar batteries can be integrated into the philippi P-BUS system. The philippi Control Unit PCU then shows the battery’s state of charge, voltage, current, cell voltages and temperature on its touch display, together with tanks, energy flow and loads. You see and control the battery and on-board system in one place.
Frost-proof charging.
The heating elements surround the cells and start below 0 °C as soon as charging current is present, at up to 10 A or 150 W. The heat goes straight into the cells, so according to the manufacturer the battery charges down to −30 °C. Without charging current the heating stays off; self-discharge is about 1 to 3 % per month.
Installed flat.
At just 58 mm high, the Slim fits under a bed, floor or bench seat where no block battery would fit. The battery can be installed upright or lying down.
Made by BullTron, supported by philippi.
BullTron develops and assembles its LiFePO4 batteries in Germany. The screwed housing can be opened, and BMS, balancer and heating are replaceable. philippi is a BullTron wholesaler in Remseck am Neckar and advises on selection, installation and conversion: +49 7146 87 44 0.
In the philippi P-BUS system
All BullTron Polar batteries can be integrated into the philippi P-BUS system. The philippi PCU Control Unit then shows state of charge, voltage, current, cell voltages and temperature. The connection is made with our BullTron P-BUS adapter: a plug-and-play cable, about 30 cm long, with an integrated T-piece for further P-BUS devices.
BullTron P-BUS adapter26,18 € About the PCU
Technical data
| Feature | Value |
|---|---|
| BullTron part number | LI100B150-24-SLP |
| EAN | 4262358250438 |
| Nominal voltage | 25.6 V |
| Capacity | 100 Ah / 2,560 Wh |
| Continuous discharge current | 150 A |
| Peak current | 300 A |
| Charging current (recommended / max.) | 50 A / max. 100 A |
| Charge voltage | 28.4 to 29.2 V |
| Heating | yes, up to 10 A / 150 W, charging down to −30 °C |
| BMS | Smart BMS, 5 A active balancer |
| Interfaces | Bluetooth app, philippi P-BUS |
| On/off switch | yes |
| Cycles | ≥ 7,000 at 80 % depth of discharge |
| Terminals | round posts |
| Dimensions (L × W × H) | 458 × 430 × 58 mm |
| Weight | 22.5 kg |
| Warranty | 5-year manufacturer’s warranty, extendable to 10 years |
Manufacturer and product safety
Bulltron GmbH
Bei den Linden 7 a
21449 Radbruch
Deutschland
info@bulltron.de
Safety information: see the operating manual and data sheet.
Frequently asked questions. Answered briefly.
Can I charge the BullTron Polar Slim 24 V 100 Ah in frost?
Yes. The integrated heating starts below 0 °C as soon as charging current is present and warms the cells evenly from the outside. According to the manufacturer, the battery thus charges at temperatures down to −30 °C. Without charging current the heating stays off and does not drain the battery while parked or in winter storage.
Can the battery be connected to the philippi PCU?
Yes. All BullTron Polar batteries can be integrated into the philippi P-BUS system. The PCU Control Unit then shows state of charge, voltage, current, cell voltages and temperature on its touch display, together with tanks and loads. The BullTron app via Bluetooth also remains available, for example for settings.
Can I simply replace my lead-acid or AGM battery?
According to the manufacturer, a one-to-one swap for lead-acid, GEL or AGM batteries is possible without changing the chargers. Still check whether your chargers offer a LiFePO4 profile with a charge voltage of 28.4 to 29.2 V. philippi in Remseck advises you on the conversion on +49 7146 87 44 0.
Goes well with it. Accessories and add-ons.
Prefer a quick chat?
Tell us what you are planning. We will tell you honestly what you need and what you don’t.
