The Philippi switch panel STV 106 is a circuit distributor from the 100 series for boats and vehicles with 6 fused circuits without integrated charging capability – for 12V and 24V on-board electrical systems.
- Pure, compact fusing without unnecessary additional functions – cheaper than STV 105 and STV 106/1
- Each circuit with its own rocker switch, LED indicator, and thermal circuit breaker
- Adapts to other panels in the 100 series, as all dimensions are coordinated
- Fuse rating can be changed later, no separate installation of fuses required
Like all circuit distributors in the 100 series, the Philippi switch panel STV 106 is based on E-T-A 1140 series thermal circuit breakers. In the event of a short circuit or overload, the red button of the affected circuit pops out and the corresponding LED goes out; after the fault has been cleared, the circuit is reactivated by pressing the button. 8A circuit breakers are installed ex works; alternatively, 4, 6, 10, 12, or 16 A are available.
If you only need fusing without a socket, the STV 106 is the slimmer and more affordable choice compared to the STV 105 (5 circuits + USB-C/A + DC socket) or the STV 106/1 (6 circuits + DC socket). A labeling sheet STKZ with self-adhesive labels is included. Developed and manufactured in Germany.
| Property | Value |
|---|---|
| Circuits | 6, E-T-A 1140 thermal circuit breaker with rocker switch and LED indicator |
| Rated current | 8 A ex works (optional 4/6/10/12/16 A) |
| On-board electrical system | 12 V and 24 V DC |
| Dimensions | W 110 x H 117 x D 70 mm |
| Connection | Flat plug connectors 6.3 mm, recommended terminal blocks type RKL 10 |
| Item No. | 020001060 (0 2000 1060) |
The STV 106 can be combined horizontally and vertically with other panels of the 100 series. Recommended conductor cross-sections for the consumer supply lines: for 4/6 A fuse 1.0 mm² (cable under 10 m) or 1.5 mm² (over 10 m); for 8/10 A 1.5 mm² or 2.5 mm²; for 12/16 A 2.5 mm² or 4 mm².
What is the difference between the STV 106 and the STV 106/1?
The STV 106/1 additionally has an integrated DC socket – if you don't need it, you save money with the STV 106.
Do I have to install separate fuses?
No, the switch and fuse are combined in one component.
Can I change the fuse rating later?
Yes, the thermal circuit breakers can be easily replaced with a different fuse rating (4, 6, 8, 10, 12, or 16 A).
If you have any questions about compatibility with other panels of the 100 series, we will be happy to advise you. Order now.
Dimensions
Width: 12
Length: 18
Height: 10
Downloads
Deutsche Downloads
