In detail. Shore power unit LAE 101 for panel mounting with Schuko socket.

  • Schuko socket directly in the front panel, for example for a charger or tools
  • 30 mA residual current protection and 16 A circuit protection in one device, double-pole
  • Mains indicator lights show whether shore power is present
  • Enclosed housing made of self-extinguishing plastic, no additional cover required

The LAE 101 is the LAE 100 with a socket: the same protection, but in landscape format and with an integrated Schuko socket. Further loads can be connected via the output terminals. To protect sockets, water heater and battery charger separately, the LAE 113 is the right choice.

Connection is via feed-through terminals: shore power to 11 (L), 12 (N) and PE, loads to 41 (L), 42 (N) and PE. The installation manual requires at least 2.5 mm² and the supplied wire-end ferrules. If the cable from the inlet or CEE inlet socket is longer than 3 m, protect it additionally with the circuit breaker LAE 205. Work on 230 V must only be carried out by a qualified electrician.

Goes with: circuit breaker LAE 205 for supply cables over 3 m, mains control panel LAR for reverse polarity indication, CEE inlets and shore power cables.

Original equipment quality

  • Individually tested: every unit is connected and tested in a test environment in Remseck.
  • Brand-name components, as in series production for boatyards.
  • Repairable for decades: spare parts up to 30 years back, own repair centre.
How we manufacture

Technical data

FeatureValue
Mains voltageAC 230 V / 50 Hz
Circuit breakerRCBO (RCD/MCB) 16 A / 30 mA, double-pole
SocketSchuko, 230 V
IndicationMains indicator lights
ConnectionFeed-through terminals, conductors min. 2.5 mm²
HousingEnclosed, self-extinguishing plastic
Dimensions (W × H × D)185 × 150 × 100 mm
Panel cut-out160 × 125 mm
Minimum installation depth97 mm
ApplicationBoat, yacht, expedition and off-road vehicle
StandardMade to EN ISO 13297, VDE-tested components
Scope of deliveryShore power unit, wire-end ferrules, installation manual
Item no.010001010

Manufacturer and product safety

philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de

Safety information: see the operating manual and data sheet.

Frequently asked questions. Answered briefly.

What is the socket of the LAE 101 suitable for?

The Schuko socket supplies protected shore power directly at the unit, for example for a battery charger, a fan heater or power tools. It sits behind the RCBO 16 A / 30 mA. Socket and output terminals share these 16 A: if more current is drawn, the circuit breaker trips.

Can I install the LAE 101 in an expedition vehicle?

Yes. The LAE 101 takes in shore power on a boat just as in an expedition or off-road vehicle with living cabin and provides 230 V there directly via its Schuko socket. It sits inside, the CEE inlet socket outside on the cabin or body. For vehicles with living quarters, DIN VDE 0100-721 applies; connection by a qualified electrician.

What is the difference between the LAE 101 and the LAE 113?

Both have an RCBO 16 A / 30 mA and a Schuko socket. The LAE 113 additionally protects three load circuits, each with a double-pole 10 A circuit breaker, intended for sockets, water heater and battery charger, and its two indicator lights also show reverse polarity. It is larger for this: W 260 × H 185 mm instead of W 185 × H 150 mm.

Goes well with it. Accessories and add-ons.

Prefer a quick chat?

Tell us what you are planning. We will tell you honestly what you need and what you don’t.

Beratung bei philippi in Remseck am Neckar