In detail. Automatic changeover LAU 216 for shore power/generator or shore power/inverter, 16 A.

  • Switches with a delay and only once the source voltage is stable, protecting generator and loads
  • Isolates the sources on all poles, two sources never feed in at the same time
  • P-BUS interface for display and settings

Without a built-in RCBO, the outputs must be protected by RCBOs, for example with a shore power unit or a panel from the AC panels.

More sources or more generator power: LAU 325 (3 sources, generator 25 A) and LAU 340 (generator 40 A).

Original equipment quality

  • Individually tested: every unit is connected and tested in a test environment in Remseck.
  • Brand-name components, as in series production for boatyards.
  • Repairable for decades: spare parts up to 30 years back, own repair centre.
How we manufacture

Technical data

FeatureValue
Rated voltage230 V / 50 Hz
Input 1 / 216 A / 16 A
Output 1 / 216 A / 16 A
RCBO– (required separately)
ProtectionIP X4
Dimensions (W × H × D)160 × 200 × 115 mm
P-BUSyes, via ACE-T cable (5 0411 1161)
Item no.011002160
UseBoat, yacht, expedition and off-road vehicle

Manufacturer and product safety

philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de

Safety information: see the operating manual and data sheet.

Frequently asked questions. Answered briefly.

Which sources does the LAU 216 switch between?

Depending on wiring, automatically between shore power and generator or between shore power and inverter.

What is the difference between LAU 216 and LAU 216 F?

The LAU 216 F has a built-in RCBO 16 A/30 mA and room for an ACW current transformer; with the LAU 216 the RCBO must be provided separately.

Can the LAU 216 be connected to the P-BUS system?

Yes, via the ACE-T cable (item no. 5 0411 1161). The PSM or PSL system monitor then shows the active source and voltage and lets you set the changeover delay and voltage limits.

Is the LAU 216 suitable for an expedition vehicle?

Yes. In the living cabin it switches automatically between shore power and inverter as soon as a source fails or the shore power plug is pulled. For vehicles with living quarters DIN VDE 0100-721 applies; installation by a qualified electrician.

Related guides. Explained in depth.

Goes well with it. Accessories and add-ons.

philippi switch panel UKW 3130
philippi

Switch panel UKW 3130 (VHF)

52,00 €
philippi shore power unit LAE 234 LGK for combi inverters
philippi

Shore power panel LAE 234 LGK for combi inverters

719,00 €
philippi switch panel STV 08 with 8 single-pole rocker switches
philippi

Control panel STV 08

41,00 €
philippi switch panel STV ISO control panel
philippi

STV ISO switchboard

53,00 €

Prefer a quick chat?

Tell us what you are planning. We will tell you honestly what you need and what you don’t.

Beratung bei philippi in Remseck am Neckar