In detail. Automatic changeover LAU 325 for shore power, generator and inverter, 25 A.

  • Switches with a delay and only once the source voltage is stable, protecting generator and loads
  • Isolates the sources on all poles, two sources never feed in at the same time
  • Additional output circuit can switch off charger or water heater in inverter mode

Without a built-in RCBO, the outputs must be protected by RCBOs, for example with a shore power unit or a panel from the AC panels.

Original equipment quality

  • Individually tested: every unit is connected and tested in a test environment in Remseck.
  • Brand-name components, as in series production for boatyards.
  • Repairable for decades: spare parts up to 30 years back, own repair centre.
How we manufacture

Technical data

FeatureValue
Rated voltage230 V / 50 Hz
Input 1 / 216 A / 16 A
Input 3 (generator)25 A (6 kW)
Output 1 / 225 A / 16 A
RCBO– (required separately)
ProtectionIP X4
Dimensions (W × H × D)266 × 200 × 115 mm
P-BUSyes, via ACE-T cable (5 0411 1161)
Item no.011003250
UseBoat, yacht, expedition and off-road vehicle

Manufacturer and product safety

philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de

Safety information: see the operating manual and data sheet.

Frequently asked questions. Answered briefly.

Which sources does the LAU 325 switch between?

Automatically between shore power, inverter and generator; it selects the available source itself.

How much generator power can the LAU 325 handle?

Up to 25 A, i.e. 6 kW. For up to 9 kW there is the LAU 340.

What is the difference between LAU 325 and LAU 325 F?

The F version has a built-in RCBO and room for an ACW current transformer; without F the RCBO must be provided separately.

Can the LAU 325 be connected to the P-BUS system?

Yes, via the ACE-T cable (item no. 5 0411 1161). The PSM or PSL system monitor then shows the active source and voltage and lets you set the changeover delay and voltage limits.

Is the LAU 325 suitable for an expedition vehicle?

Yes. In the living cabin it switches automatically between shore power, inverter and generator as soon as a source fails or the shore power plug is pulled. For vehicles with living quarters DIN VDE 0100-721 applies; installation by a qualified electrician.

Prefer a quick chat?

Tell us what you are planning. We will tell you honestly what you need and what you don’t.

Beratung bei philippi in Remseck am Neckar