You have a legal guarantee of at least 2 years on this product.
The philippi P-BUS System Monitor PSL Plus is a control and display unit for the P-BUS onboard electrical system of yachts, motorhomes and vehicles. It shows all data of the electrical system on a 5" colour touchscreen and connects up to 4 tank senders and 2 temperature sensors directly - without a separate tank interface.
- Saves an additional tank interface, as up to 4 tank senders are connected directly to the back of the display
- Freely customisable display layout on info and switch pages - operation just as you are used to from a smartphone
- Capacitive touchscreen with Gorilla Glass and automatic brightness adjustment for good readability even in sunlight
- Open, expandable P-BUS system - future-proof thanks to ongoing software development
On three screen pages, the philippi PSL Plus provides all important information: the information page shows battery, tank, temperature and bilge data, the energy page shows the status of the DC and AC system including the energy flow between battery and AC mains via an inverter/charger, and on the control page main switches and loads can be switched and dimmed directly.
Setup is done without a separate computer: the PSL Plus registers connected P-BUS devices largely automatically. Data is logged to an SD card so that battery and consumption histories can be evaluated later. The monitor can be installed either vertically or horizontally.
| Display | 5" full-colour TFT touchscreen, capacitive, Gorilla Glass |
|---|---|
| Operating voltage | DC 8-32 V |
| Current consumption | 90 mA, stand-by 10 mA at 12 V |
| Dimensions | W 157.5 x H 105 x D 35 mm |
| Mounting cutout | W 140 x H 85 mm |
| Integrated tank interface | up to 4 tank senders + 2 temperature sensors |
| Scope of delivery | M12 T-cable, 2x P-BUS terminator |
Compatibility: The PSL Plus is part of the philippi P-BUS system and works together with other P-BUS components such as the shunt SHX, the tank interface CMT3 (only required for connecting a DFS flow sensor) and the P-BUS terminator. Thanks to its operating voltage of DC 8-32 V, it is equally suitable for 12 V and 24 V onboard electrical systems.
Which onboard system voltage is the PSL Plus suitable for?
The PSL Plus works with an operating voltage of DC 8-32 V and is therefore suitable for both 12 V and 24 V onboard electrical systems.
Is a separate tank interface required for the tank senders?
No, up to 4 tank senders and 2 temperature sensors can be connected directly to the back of the display. The separate tank interface CMT3 is still required for connecting a DFS flow sensor.
What is the difference from the PSL?
The PSL Plus already has an integrated tank interface for 4 tank senders and 2 temperature sensors, whereas the PSL requires a separate tank interface.
What is included in the scope of delivery?
The scope of delivery includes an M12 T-cable and two P-BUS terminators (terminating resistors).
Order the philippi P-BUS System Monitor PSL Plus now and keep an eye on your onboard electrical system at all times.
⚠️Safety data sheet can be found under Downloads!
Downloads
Deutsche Downloads
Englische Downloads
