In detail. Shore power unit LAE 220 in IP 65 housing.

  • 30 mA residual current protection and 16 A circuit protection, double-pole, for up to 3.6 kW of shore power
  • Mains indicator lamp shows whether shore power is present
  • Housing with hinged lid, protection class IP 65, for installation inside the boat or vehicle
  • Compact: 80 × 150 × 97 mm, no cut-out needed

The LAE 220 only takes in shore power and passes it on, protected, to the downstream distribution. It has no socket. With socket there is the LAE 211, with two additional load circuits the LAE 230, and for Swiss networks the LAE 220 CH with 13 A.

L and N are connected directly to the RCBO, the protective earth to a terminal strip in the housing; the cable enters through a cable gland. The installation manual requires at least 3 × 2.5 mm² and intends the LAE 220 for indoor installation, not outside. If the cable from the inlet or CEE inlet socket is longer than 3 m, the circuit breaker LAE 205 must also be installed close to the inlet. Work on 230 V must only be carried out by a qualified electrician.

Goes with: CEE inlets and shore power cables, circuit breaker LAE 205, mains control panel LAR. Two inlets at bow and stern need a bow/stern changeover switch.

Original equipment quality

  • Individually tested: every unit is connected and tested in a test environment in Remseck.
  • Brand-name components, as in series production for boatyards.
  • Repairable for decades: spare parts up to 30 years back, own repair centre.
How we manufacture

Technical data

FeatureValue
Mains voltageAC 230 V / 50 Hz
InputShore power up to 3.6 kW (16 A)
Circuit breakerRCBO (RCD/MCB) 16 A / 30 mA, double-pole
IndicationMains indicator lamp
HousingPlastic with hinged lid
Protection classIP 65
Installation locationInside boat or vehicle, not outside
Conductor cross-sectionmin. 3 × 2.5 mm²
Dimensions (W × H × D)80 × 150 × 97 mm
ApplicationBoat, yacht, expedition and off-road vehicle
Item no.010002201

Manufacturer and product safety

philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de

Safety information: see the operating manual and data sheet.

Frequently asked questions. Answered briefly.

Can I mount the LAE 220 outside?

No. According to the installation manual the LAE 220 is intended for indoor installation, not outside. Protection class IP 65 protects the housing against water jets and dust, but does not replace a protected location. Only the watertight inlet or CEE inlet socket sits outside on the hull, deck or cabin wall.

Is the LAE 220 suitable as RCBO protection in an expedition vehicle?

Yes. The LAE 220 is a ready-made, compact RCBO unit 16 A / 30 mA with double-pole protection that protects shore power in an expedition or off-road vehicle directly behind the CEE inlet. Double-pole matters because Schuko-CEE adapters can swap live and neutral. For vehicles with living quarters, DIN VDE 0100-721 applies; connection by a qualified electrician.

What is the difference between the LAE 220 and the LAE 220 CH?

Both sit in the same IP 65 housing measuring 80 × 150 × 97 mm and have 30 mA residual current protection. The LAE 220 works with a 16 A RCBO. The LAE 220 CH is matched to the Swiss network with 13 A. Both are intended for indoor installation and are made in Remseck am Neckar, Germany.

Goes well with it. Accessories and add-ons.

Prefer a quick chat?

Tell us what you are planning. We will tell you honestly what you need and what you don’t.

Beratung bei philippi in Remseck am Neckar