In detail. Cam switch CA 63 D 926 shore/generator/inverter with charger cut-out, 63 A.

  • Three sources, up to 63 A
  • Charger cut-out in inverter mode
  • 64 × 64 mm front

For up to 25 A there is the CH 16 D 926.

Original equipment quality

  • Individually tested: every unit is connected and tested in a test environment in Remseck.
  • Brand-name components, as in series production for boatyards.
  • Repairable for decades: spare parts up to 30 years back, own repair centre.
How we manufacture

Technical data

FeatureValue
FunctionChangeover 1-0-2-3 shore/generator/inverter, charger cut-out
Current rating63 A
Front / mounting depth64 × 64 mm / 81 mm
Max. panel thickness5 mm (thicker: LEER CA blank plate)
Item no.640427980
UseBoat, yacht, expedition and off-road vehicle

Manufacturer and product safety

philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de

Safety information: see the operating manual and data sheet.

Frequently asked questions. Answered briefly.

Why is the charger disconnected in inverter mode?

Otherwise the inverter would supply the charger with 230 V, which in turn charges the same battery that feeds the inverter. That only wastes energy and can drain the battery.

What does Wandler mean?

Wandler is the inverter that produces 230 V from the on-board battery. The switch selects whether shore power, generator or inverter supplies the 230 V system.

Does the CA 63 D 926 fit the switchboard of an expedition vehicle?

Yes. It is mounted from the front into the panel and suits 230 V systems in the living cabin, for example switching between shore power and inverter. For panels thicker than 5 mm use the LEER CA blank plate.

Goes well with it. Accessories and add-ons.

Prefer a quick chat?

Tell us what you are planning. We will tell you honestly what you need and what you don’t.

Beratung bei philippi in Remseck am Neckar