philippi shore power changeover unit LAE 111: black flush-mount front panel with circuit breakers, indicator lights and voltmeter
philippi · Power distribution
Shore power changeover unit LAE 111 for generator/inverter, 25 A
The philippi shore power changeover unit LAE 111 supplies the 230 V on-board system of a yacht or expedition vehicle either from shore power or from a generator or inverter. It protects with an RCBO (combined RCD and circuit breaker, 25 A / 30 mA), distributes to four double-pole 10 A circuits and shows the on-board voltage on a voltmeter.
- For safe shore power connection
In detail. Shore power changeover unit LAE 111 for generator/inverter, 25 A.
- Two inputs: shore power and generator or inverter, rated up to 25 A
- Four load circuits of 10 A each, double-pole, all behind the 30 mA RCD protection
- Two mains indicator lights and voltmeter up to 250 V for the on-board voltage
- Enclosed housing made of self-extinguishing plastic, no additional cover required
The LAE 111 is the panel-mount solution for yachts and expedition vehicles with more than one 230 V source. According to the installation manual, the four outputs are intended for water heater, battery charger, sockets and air conditioning; the circuit breakers also let you switch the loads individually. For automatic switching between sources there are the LAU AC changeover units. If you only feed in shore power, the LAE 113 is sufficient.
According to the manual, shore power and generator/inverter are each connected with at least 3 × 4 mm², outputs A to D with at least 3 × 1.5 mm². The panel cut-out is 235 × 160 mm with a minimum installation depth of 97 mm. If the cable from the inlet or CEE inlet socket is longer than 3 m, a circuit breaker such as the LAE 205 must also be installed close to the inlet. Work on 230 V must only be carried out by a qualified electrician.
Goes with: circuit breaker LAE 205, AC changeover units for automatic switching, CEE inlets and shore power cables.
Original equipment quality
- Individually tested: every unit is connected and tested in a test environment in Remseck.
- Brand-name components, as in series production for boatyards.
- Repairable for decades: spare parts up to 30 years back, own repair centre.
Technical data
| Feature | Value |
|---|---|
| Mains voltage | AC 230 V / 50 Hz |
| Inputs | Shore power; generator or inverter |
| Current rating | max. 25 A |
| Circuit breaker | RCBO (RCD/MCB) 25 A / 30 mA, double-pole |
| Load circuits | 4 × 10 A, double-pole |
| Indication | 2 mains indicator lights, voltmeter AC 250 V |
| Connection | Feed-through terminals |
| Conductor cross-section | Inputs min. 3 × 4 mm², outputs min. 3 × 1.5 mm² |
| Dimensions (W × H × D) | 260 × 185 × 100 mm |
| Panel cut-out | 235 × 160 mm, minimum depth 97 mm |
| Application | Boat, yacht, expedition and off-road vehicle |
| Standard | Made to EN ISO 13297, VDE-tested components |
| Item no. | 010001110 |
Manual
Read the manual onlineManufacturer and product safety
philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de
Safety information: see the operating manual and data sheet.
Frequently asked questions. Answered briefly.
Which power sources can the LAE 111 switch between?
Switching is done by hand with a cam switch. The LAE 111 has two inputs: one for shore power and one for a generator or inverter, each 230 V / 50 Hz. The on-board system is supplied from the selected source and can be loaded up to 25 A. According to the installation manual both inputs are connected with at least 3 × 4 mm², and all outputs sit behind the RCBO 25 A / 30 mA.
What are the four load circuits intended for?
The installation manual assigns the four double-pole 10 A circuit breakers to the water heater, the battery charger, the sockets and the air conditioning. The circuit breakers also let you switch the individual loads by hand. The manual requires at least 3 × 1.5 mm² for each output, while the inputs need 3 × 4 mm².
What is the difference between the LAE 111 and the LAU changeover units?
The LAE 111 is a panel-mount unit with integrated distribution: RCD protection, four load circuits, voltmeter and indicator lights in one front panel. The LAU changeover units sit in their own housing, switch automatically and with a delay between up to three sources, and can be connected to philippi monitors via P-BUS.
Related guides. Explained in depth.
Goes well with it. Accessories and add-ons.
Prefer a quick chat?
Tell us what you are planning. We will tell you honestly what you need and what you don’t.
