Bavaria refit

A new switch panel for your Bavaria. Exact fit, no rewiring.

Before: the original panel

The panel fitted at the factory, on many yachts built around 2000. Over time the switches fail, and it does not show the battery's state of charge.

After: the refit panel

Exact 1:1 replacement for the original panel, with thermal rocker circuit breakers, DC and USB-C/A sockets and an integrated BTM2 battery and tank monitor.

Plug in instead of rewiring

The pre-assembled wiring harness fits the existing connector on the boat, and the existing tank sensors stay in place. Refit panels are available for Bavaria panels 16, 20, 301 and 303.

Navigation corner of a Bavaria with the original 303 switch panel
The same navigation corner with the philippi Refit panel 303
philippi Refit panel with pre-assembled wiring harness, cut out

In detail. Bavaria Refit Panel 303.

  • Complete replacement of the control unit without complex electrical installation – the original panel remains untouched on the boat side
  • 20 circuits with robust thermal rocker circuit breakers instead of prone push-buttons
  • Integrated BTM2 monitor directly displays battery and tank data and transmits it to the plotter's NMEA network
  • DC and USB-C/A charging sockets and 2 changeover switches for navigation light control already installed
  • Expandable with solar monitoring, deep discharge protection, and remote disconnection of luxury consumers

The philippi Bavaria Refit Panel 303 is aimed at Bavaria owners whose original panel can no longer reliably display battery charge status or whose switches no longer function properly. Since only the visible control unit is replaced and the included wiring harness is already equipped with the appropriate connectors, the on-board electrics remain easily accessible, and maintenance as well as later expansions of the on-board network remain simple.

Battery management for lithium or lead-acid batteries is carried out via a shunt near the consumer battery. Optionally, solar data can also be displayed with an additional shunt, and a remote-controlled main switch can implement deep discharge protection or the early disconnection of luxury consumers.

Compatibility: For Panel 303, the TIL tank interface is additionally required, as bundle probes are installed in the boat. If two holding tanks are installed, the TIL2 is also required. No TIL is required for the SE-TFT panel, as the tank sensors are connected directly to the monitor there (10–180 Ω).

Original equipment quality

  • Individually tested: every unit is connected and tested in a test environment in Remseck.
  • Brand-name components, as in series production for boatyards.
  • Repairable for decades: spare parts up to 30 years back, own repair centre.
How we manufacture

Technical data

Feature Value
Circuits 20, with thermal rocker circuit breakers
Monitor BTM2, NMEA-capable
Scope of delivery DC and USB-C/A charging socket, 2 changeover switches for navigation lights, wiring harness with multi-connector and accessories
Panel dimensions W 265 x H 210 x D 70 mm
SKU 030183015

Manufacturer and product safety

philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de

Safety information: see the operating manual and data sheet.

Bavaria Refit

Does the panel fit your boat? All panels compared.

Photos of the original panels, the swap in three steps and answers to frequently asked questions.

Frequently asked questions. Answered briefly.

Does the Bavaria Refit Panel 303 fit as a direct replacement for my existing panel?

Yes, it has identical dimensions to the original, permanently screwed-in Bavaria Panel 303. Only the visible control unit is replaced and connected to the existing on-board cable connector.

Do I need an additional tank interface?

For Panel 303, the TIL tank interface is required, as bundle probes are installed in the boat. If two holding tanks are installed, the TIL2 is also required.

Can I also monitor my solar system?

Yes, solar data can optionally be displayed with an additional shunt.

Goes well with it. Accessories and add-ons.

philippi tank interface (TIL / TIL #2)
philippi

Tank interface TIL / TIL #2 for Bavaria tank senders

89,00 €
philippi remote-controlled battery switch FHR 265 with indicator LED
philippi

Remote-controlled battery main switch FHR 265

189,00 €
philippi NMEA 2000 adapter cable N2K cable
philippi

NMEA2000 Adapter Cable N2K Cable

49,00 €

Prefer a quick chat?

Tell us what you are planning. We will tell you honestly what you need and what you don’t.

Beratung bei philippi in Remseck am Neckar