philippi Bavaria refit panel 20 – plug-and-play replacement panel
philippi · Bavaria Refit Panels
Bavaria Refit Panel 20
The philippi Bavaria Refit-Panel 20 replaces the factory-fitted Bavaria Panel 20 one-to-one, without changing the existing wiring. It comes ready to plug in with wiring harness, rocker circuit breakers, DC and USB-C/A charging sockets, integrated BTM 2 monitor, TIL tank interface and shore power unit with RCB circuit breaker 16 A / 30 mA. Dimensions: W 350 x H 300 x D 90 mm.
- Identical dimensions to the previous solution
- Upgrading your BAVARIA
Bavaria refit
A new switch panel for your Bavaria. Exact fit, no rewiring.
Before: the original panel
The panel fitted at the factory, on many yachts built around 2000. Over time the switches fail, and it does not show the battery's state of charge.
After: the refit panel
Exact 1:1 replacement for the original panel, with thermal rocker circuit breakers, DC and USB-C/A sockets and an integrated BTM2 battery and tank monitor.
Plug in instead of rewiring
The pre-assembled wiring harness fits the existing connector on the boat, and the existing tank sensors stay in place. Refit panels are available for Bavaria panels 16, 20, 301 and 303.
In the trade press. What specialist media write.
In detail. Bavaria Refit Panel 20.
The Bavaria Refit-Panel 20 is a plug-and-play 1:1 replacement panel for power distribution in the factory-installed Bavaria Panel 20, modernizing your yacht's onboard electronics without altering existing wiring.
Only the visible control unit is replaced and connected via the boat's existing cable connector.
- Plug-and-play thanks to pre-assembled wiring harness – simple, secure installation
- Circuits with thermal rocker circuit breakers, as well as DC and USB-C/A charging sockets
- Tank and battery monitoring via the integrated BTM2 monitor
- Includes Tank Interface TIL for two fresh water and one waste water brush probe
- Includes shore power unit with RCB circuit breaker 16 A / 30 mA
- Optional battery management via Shunt SHE 348 (sold separately) – always keep an eye on the charge status of lithium or lead batteries
- Dimensions: W 350 x H 300 x D 90 mm
Scope of delivery: Panel with pre-assembled wiring harness, Tank Interface TIL, integrated BTM2 monitor, and shore power unit. The Shunt SHE 348 is optional and ordered separately; installation takes place near the consumer batteries (usually under the saloon settees).
Original equipment quality
- Individually tested: every unit is connected and tested in a test environment in Remseck.
- Brand-name components, as in series production for boatyards.
- Repairable for decades: spare parts up to 30 years back, own repair centre.
Manufacturer and product safety
philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de
Safety information: see the operating manual and data sheet.
Bavaria Refit
Does the panel fit your boat? All panels compared.
Photos of the original panels, the swap in three steps and answers to frequently asked questions.
Frequently asked questions. Answered briefly.
Does the Refit-Panel 20 fit 1:1 into my Bavaria yacht?
Yes. The installation dimensions (W 350 x H 300 x D 90 mm) correspond to the factory-installed Panel 20. Only the visible control unit is replaced and connected via the existing boat-side cable connector.
What is included in the scope of delivery?
The panel with pre-assembled wiring harness, the Tank Interface TIL, the shore power unit, and the integrated BTM2 monitor.
What else do I need to order?
For battery management, the Shunt SHE 348 – this is optional and ordered separately.
Which batteries can I monitor?
Both lithium and lead batteries; the BTM2 in conjunction with the Shunt SHE 348 handles capacity monitoring.
How complex is the installation?
Low: The panel is pre-wired for plug-and-play, no modification of the existing wiring is necessary.
Which tank sensors can I monitor with the Tank Interface TIL?
The included Tank Interface TIL is designed for two fresh water and one waste water brush probe.
What charging connections does the panel offer?
The panel features circuits with DC and a combined USB-C/A charging socket.
How is the integrated shore power unit protected?
Via an RCB circuit breaker with 16 A / 30 mA.
Is there also a smaller panel variant?
Yes, the Bavaria Refit-Panel 16 with dimensions W 235 x H 250 x D 60 mm for the correspondingly smaller Bavaria standard equipment.
Goes well with it. Accessories and add-ons.
Prefer a quick chat?
Tell us what you are planning. We will tell you honestly what you need and what you don’t.
