Blue Sea Systems fuse holder for Class T fuses 225 A–400 A (3/8")
Blue Sea Systems · High current protection
Blue Sea Class T fuse holder 225–400 A (3/8")
This fuse holder for Class T fuses from 225 A to 400 A takes one Class T fuse of this rating class. The four-stud design leaves enough space around the terminal stud to fit even large cable lugs without the fuse getting in the way. A transparent plastic cover protects against contact, and the fuse can be replaced without disconnecting the cables.
- Nickel-plated copper busbars
- Robust construction
In detail. Blue Sea Class T fuse holder 225–400 A (3/8").
- Four-stud design with plenty of room for large cable lugs
- Fuse replacement without disconnecting the cables
- Transparent plastic cover protects against contact
- Fuse mount made of tinned copper, housing base made of heat-resistant UL 94-V0 material
This makes the fuse holder suitable for protecting high-current main circuits in marine and off-road installations. Matching fuses can be found under Class T fuses.
Technical data
| Feature | Value |
|---|---|
| Matching fuses | Class T, 225 A to 400 A |
| Maximum operating voltage | 160 V DC |
| Maximum continuous current | 320 A |
| Terminal studs | 3/8"-16 (10 mm hole) |
| Cover fastening | 1/4" screws |
| Fuse mount | tinned copper |
| Housing base | UL 94-V0, heat-resistant |
| SKU | 700105502 |
Manufacturer and product safety
Navico Group Americas LLC (brand Blue Sea Systems)
N85 W12545 Westbrook Crossing
Menomonee Falls, WI 53051
USA
www.bluesea.com/contact
Safety information: see the operating manual and data sheet.
Frequently asked questions. Answered briefly.
How does this holder differ from the BS 5502100 fuse holder?
Both holders take Class T fuses from 225 A to 400 A and are designed for 320 A continuous current. This holder has a four-stud design with plenty of room for large cable lugs, and the cables stay connected when the fuse is replaced. The BS 5502100 fuse holder, by contrast, uses a swing cover. Choose according to cable size and installation space.
Which fuses fit the holder?
This holder takes Class T fuses from 225 A to 400 A, i.e. the 225, 250, 300, 350 and 400 A ratings. The connection is via 3/8"-16 (10 mm hole) studs, and the cover is fastened with 1/4" screws. The holder is designed for a maximum of 160 V DC and 320 A continuous current.
How is the fuse replaced?
The cables do not need to be disconnected to replace the fuse, which saves time and protects the cable lugs. The transparent plastic cover is fastened with 1/4" screws and protects against contact during operation. The fuse mount is made of tinned copper, the housing base of heat-resistant material to UL 94-V0.
Goes well with it. Accessories and add-ons.
Prefer a quick chat?
Tell us what you are planning. We will tell you honestly what you need and what you don’t.
