Kissling battery switch BH 200 F
Kissling · Battery master switch
Kissling battery main switch BH 200 F
The Kissling BH 200 F battery main switch, available from philippi, is a waterproof main switch for the electrical system of boats and vehicles, rated 200 A at 32 V. It briefly withstands 500 A for 3 minutes and 1000 A for 30 seconds. Solid silver contacts keep heating low, and IP 67 tightness is tested.
- Automotive Quality
- Long service life
In detail. Kissling battery main switch BH 200 F.
- Switch lever removable in the off position so that nobody can switch it back on without authorisation; IP 67 also applies with the key removed.
- Solid silver contacts: lower resistance than copper and no oxidation from switching sparks, giving higher load capacity and longer service life.
- Choice of panel or flange mounting with wall thickness up to 33 mm.
Technical data
| Feature | Value |
|---|---|
| Rated current / rated voltage | 200 A / 32 V |
| Peak current | 500 A / 3 min, 1000 A / 30 s |
| Connection | M10 |
| Protection class | IP 67 |
| Dimensions | Ø 55 x 105 mm |
| Mounting | Panel or flange mounting, max. wall thickness 33 mm |
| Terminal studs | tinned brass |
| Order no. | 6 0003 5200 |
Manufacturer and product safety
TE Connectivity Germany GmbH (brand KISSLING)
Ampèrestrasse 12-14
64625 Bensheim
Germany
www.te.com/de/about-te/our-company/impressum.html
Safety information: see the operating manual and data sheet.
Frequently asked questions. Answered briefly.
Does the switch stay watertight with the lever removed?
Yes. The IP 67 tightness of the BH 200 F is also tested with the switch lever removed. You can remove the lever in the off position so that nobody can switch it back on without authorisation. This keeps the electrical system secured without moisture getting into the switch.
Which alternatives are there for higher voltage or higher current?
For systems up to 80 V there is the BH 200-80 F, and for higher currents the BH 400 F / BH 500 F with 400 A or 500 A. The BH 200 F itself is rated 200 A at 32 V and briefly withstands 500 A for 3 minutes and 1000 A for 30 seconds.
How is the BH 200 F mounted?
The BH 200 F can be mounted either through the panel or with a flange, with a wall thickness of up to 33 mm. It measures Ø 55 x 105 mm. It is connected via M10 terminal studs made of tinned brass. The solid silver contacts keep heating low and do not oxidise from switching sparks.
Goes well with it. Accessories and add-ons.
Prefer a quick chat?
Tell us what you are planning. We will tell you honestly what you need and what you don’t.
