• Home
  • Push Button 30mm WT30RG
  • Druckschalter mit An/Aus Knopf rot/grün
philippi

Push Button 30mm WT30RG

Art.-Nr.: 520123000

23,90 €
23,90 €
Sale Sold out
Tax included. Shipping calculated at checkout.
Verfügbar – Lieferzeit 2-5 Werktage
You have a legal guarantee of at least 2 years on this product.
EU notice on the legal guarantee of conformity Your legal guarantee rights

Cable configurator What cross-section does the feed cable to this distribution need? Calculate the feed cable

The philippi push button WT30RG is a two-colour illuminated stainless steel push button with a 30 mm mounting diameter for installation in the onboard electrical system of yachts, motorhomes and vehicles. The red/green LEDs run directly on DC 12/24 V, and the switching contact is rated at 5 A.

  • Large, easy-to-grip actuator for applications with frequent operation, e.g. bilge pumps or anchor windlasses
  • Two-colour LED feedback (red/green) shows the switching state immediately, even in the dark
  • Weatherproof stainless steel push button incl. silicone protective cap against blockage caused by salt water crusts

The philippi push button WT30RG is suitable wherever a robust, illuminated push button with a larger actuator than the smaller variants WS/WT19RG (19 mm) and WS/WT22RG (22 mm) from the same stainless steel switch range is required. It is mounted in a 30 mm mounting hole in switch panels with a panel thickness of 1-6 mm; the connection is made via a plug-in connection cable, 20 cm long.

Mounting diameter 30 mm
Panel thickness 1-6 mm
Illumination two-colour red/green, DC 12/24 V
Switching contact (NO/NC) 5 A
Connection plug-in connection cable, 20 cm
Material stainless steel
Scope of delivery silicone protective cap

Is the WT30RG also suitable for outdoor use on a yacht?

Yes, the stainless steel push button is designed for outdoor mounting and is supplied with a silicone protective cap that protects against mechanical blockage caused by salt water crusts.

Which panel thickness is permissible for installation?

The WT30RG fits switch panels with a panel thickness of 1 to 6 mm and a mounting hole diameter of 30 mm.

Order now and easily integrate the philippi push button WT30RG into your onboard electrics.

Kontaktdaten des Herstellers:

philippi elektrische systeme GmbH
Neckaraue 19
D-71686 Remseck am Neckar

⚠️Safety data sheet can be found under Downloads!
Druckschalter mit An/Aus Knopf rot/grün
Push Button 30mm WT30RG
23,90 €
23,90 €


Technology that convinces – Service you can rely on

Individual Consultation

Not sure which product suits your electrical system? We can help you – personally, competently and directly. Our team knows every component and will advise you so that everything works reliably from day one.

Tested quality from a single source

We develop and manufacture philippi-brand products ourselves in Remseck am Neckar. Partner products, for example from Blue Sea Systems, Mastervolt or Studer, we source as an authorised distributor directly from the manufacturer. So you get both from a single source – with advice from people who build on-board systems themselves.

After-sales support – we're still with you

Questions about installation, integration into the existing electrical system, or operation? We are here for you even after your purchase. Should something not work as expected, we will repair philippi devices as long as spare parts are available – so that your investment is protected in the long term.

Our FAQ

Here you will find our customers' most frequently asked questions!

Most philippi components are designed for compatibility with common marine and vehicle electrical systems. Before ordering, please check the technical specifications (dimensions, voltage, connection type) in the product description. If you are unsure, our support team will be happy to assist you.

Available items are usually shipped within 2–3 business days. You can see the current stock status directly on the product page. Shipping is free for purchases over €250.

You can return your order within the statutory right of withdrawal. Please use our return form or contact our support team – we can also help you find a suitable replacement product.

Yes. We repair philippi-brand devices in our factory in Remseck for as long as spare parts are available – well beyond the statutory warranty. For partner products, the respective manufacturer's warranty applies; just contact us if you have a warranty claim.

All available documents (dimensioned drawings, data sheets, safety instructions) can be found in the "Downloads" section directly on the respective product page.

Many components such as circuit breakers, terminals, or connectors are designed for self-assembly. For questions regarding proper installation or for more complex systems, we recommend contacting our consulting team in advance.

Contact our team by phone or email, or book a personal consultation. We know every component and will work with you to find the right solution for your project.

Customers also bought

We help you make the right decision.

Book your personal consultation now and gain clarity for your project.

Book a consultation now

Calculate cable and fuse

The cable configurator determines the cross-section and matching fuse from current, length and voltage – and supplies the cable ready-made on request.

To the cable configurator

Design your panel according to your wishes

With our factory, you can design your panel according to your wishes.

Configure panel