philippi terminal block RKL 16/4
philippi · Ersatzteile
Terminal block RKL 16/4
The philippi RKL 16/4 terminal block is a DIN rail mounted terminal strip that neatly distributes consumer and control lines in the on-board power system of yachts, boats and vehicles as a central connection point.
- German branded product
In detail. Terminal block RKL 16/4.
- Quick access to every cable for service and subsequent additions, without tedious searching
- Separate terminals for consumer and control lines as well as separate main connection terminals for +pole and –pole
- Minus terminals are internally bridged and also serve as a busbar
The RKL 16/4 terminal block strip from philippi is the interface for the on-board electronics: all incoming cables of the on-board installation are connected and labeled here, and the wiring to the switch panel is also connected via it. This creates a clear, safe on-board installation where every cable is quickly accessible for maintenance and expansion.
The RKL 10 is suitable for smaller on-board networks with fewer terminals, and the RKL 30 for very large systems. The RKL 16/4 is recommended for switch panels of the 200 series, such as the STV 235, among others.
Order now or contact us for advice on the right terminal block size.
Original equipment quality
- Individually tested: every unit is connected and tested in a test environment in Remseck.
- Brand-name components, as in series production for boatyards.
- Repairable for decades: spare parts up to 30 years back, own repair centre.
Technical data
| Property | Value |
|---|---|
| Consumer terminal pairs | 10 × 4 mm² + 6 × 6 mm² |
| Control terminals | 4 × 4 mm² |
| Connection terminal +pole | 2 × 16 mm² (bridged) |
| Connection terminal –pole | 1 × 35 mm² (Cu rail) |
| Dimensions | L 355 × W 60 × H 60 mm |
| Mounting | DIN rail |
| Item No. | 6 0004 1600 |
Manufacturer and product safety
philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de
Safety information: see the operating manual and data sheet.
Frequently asked questions. Answered briefly.
How many terminals does the RKL 16/4 terminal strip have?
The philippi RKL 16/4 offers load terminal pairs for 10 × 4 mm² and 6 × 6 mm², plus 4 control terminals of 4 mm². Main supply: positive terminal 2 × 16 mm² (bridged), negative terminal 1 × 35 mm² (copper bar). The negative terminals are bridged internally and also serve as a busbar.
Which size of on-board system is the RKL 16/4 suited to?
The RKL 16/4 is intended for medium-sized on-board systems and is recommended for Series 200 switch panels such as the STV 235. For smaller systems the RKL 10 is suitable, for very large installations the RKL 30. Size L 355 × W 60 × H 60 mm, DIN-rail mounting. Article number 6 0004 1600.
Goes well with it. Accessories and add-ons.
Prefer a quick chat?
Tell us what you are planning. We will tell you honestly what you need and what you don’t.
