In detail. Charging Current Distributor RCE.

  • Very low voltage drop during charging (< 4 mΩ forward resistance) instead of the usual 0.7–1.3 V with classic isolation diodes
  • Simultaneous charging of all connected batteries; empty batteries are preferentially charged
  • Wear-free with no mechanical switching contacts, independent of battery size and type (GEL, acid, AGM, LiFePO4)
  • Can be used for almost all charging sources: alternator, onboard charger, solar system, wind generator

The philippi RCE charging current distributor is the electronic further development of the conventional battery isolation diode. Instead of the battery-damaging and energy-wasting voltage drops of classic diodes, the RCE's MOS-FET technology ensures that all connected battery banks are supplied with the required charging voltage and the maximum available current – simultaneously and without mutual interference.

The RCE charging current distributor is suitable for standard and non-self-exciting alternators up to 180 A and works independently of the battery technology used, from classic lead-acid to LiFePO4 batteries. Two versions with M8 screw terminals are available for connection to two or three separate battery banks.

Compatibility: Alternator (standard, non-self-exciting), onboard charger, solar system, wind generator; all common battery types (GEL, acid, AGM, LiFePO4).

Frequently asked questions

Original equipment quality

  • Individually tested: every unit is connected and tested in a test environment in Remseck.
  • Brand-name components, as in series production for boatyards.
  • Repairable for decades: spare parts up to 30 years back, own repair centre.
How we manufacture

Technical data

Feature RCE 180-2 RCE 180-3
Order no. 700091802 700091803
Outputs 2 3
Rated voltage 12/24 V 12/24 V
Current carrying capacity 180 A 180 A
Forward resistance < 4 mΩ < 4 mΩ
Current consumption standby/ON < 0.5 mA / < 15 mA < 0.5 mA / < 15 mA
Dimensions L 153 × W 147 × H 95 mm L 153 × W 147 × H 95 mm
Connection M8 screw terminal, tinned M8 screw terminal, tinned

Manufacturer and product safety

philippi elektrische systeme GmbH
Neckaraue 19
71686 Remseck am Neckar
Germany
info@philippi-online.de

Safety information: see the operating manual and data sheet.

Frequently asked questions. Answered briefly.

Can the RCE also be used with lithium batteries (LiFePO4)?

Yes, the RCE charging current distributor can be used independently of battery size and type, including GEL, acid, AGM and LiFePO4 batteries.

What is the difference between the RCE 180-2 and the RCE 180-3?

The RCE 180-2 distributes the charging current to two battery banks, the RCE 180-3 to three battery banks – both with a current carrying capacity of 180 A at the input.

Goes well with it. Accessories and add-ons.

philippi battery charger ACE 12/44
philippi

Battery Charger ACE 12/44

649,00 €
Fischer Panda Panda 10000i PMS
Fischer Panda

Fischer Panda 10000i PMS diesel generator

18.908,00 €
Fischer Panda Panda 5000i PVMV-N
Fischer Panda

Fischer Panda 5000i PVMV-N diesel generator for vehicles

16.198,00 €
philippi remote display for charger FAL
philippi

Remote Display for Charger FAL

42,00 €
EP-Technologies lithium battery 48 V LB48/105
EP-Technologies

Lithium Battery 48V LB48/105

3.699,00 €

Prefer a quick chat?

Tell us what you are planning. We will tell you honestly what you need and what you don’t.

Beratung bei philippi in Remseck am Neckar