Manual WS Push Switches and WT Push Buttons, 19 and 22 mm.
The illuminated philippi WS push switches and WT push buttons are available for 19 mm and 22 mm mounting holes. The LED lights red or green and runs on 9–36 V DC. The switches handle up to 250 V AC/DC and 5 A and are sealed to IP 67 at the front.
Models: push switches and push buttons
| Model | Function | Mounting hole | LED |
|---|---|---|---|
| WS 19 RG | Push switch (latching) | 19 mm | red/green |
| WS 22 RG | Push switch (latching) | 22 mm | red/green |
| WT 19 RG | Push button (momentary) | 19 mm | red/green |
| WT 22 RG | Push button (momentary) | 22 mm | red/green |
The push switch (WS) stays in its position after being pressed until it is pressed again. The push button (WT) only switches while it is held down. In the shop the 22 mm versions are also available with a symbol on the button.
Technical data
| LED voltage | 9–36 V DC (3 mA at 12 V, 7 mA at 30 V) |
|---|---|
| Switching voltage | 3–250 V AC/DC |
| Rated current | 5 A |
| Protection rating | IP 67 at the front |
| Material | Stainless steel |
| Wiring harness | 140 mm |
| Weight | 36 g |
| Accessory according to the manual | Silicone cap |
Safety instructions and installation
- No modifications may be made to the unit, otherwise the CE mark becomes void.
- The switch or button may only be connected by qualified electricians, especially at voltages above 48 V.
- Before connecting, disconnect the battery cables and de-energise any AC source in the circuit.
- Observe the correct polarity of the batteries.
The installation and operating instructions are part of the delivery. Keep them safe for later maintenance work and pass them on to any subsequent owner.
Conformity and liability
The switches and buttons meet the requirements of EU Directive 2014/35/EU (Low Voltage Directive); conformity is confirmed by the CE mark. philippi will send a detailed declaration of conformity on request.
philippi cannot monitor compliance with the manual or the installation, operation, use and maintenance. philippi therefore accepts no liability for losses, damage or costs resulting from incorrect installation or improper use.
Manual didn't help? We are happy to help.
Contact