The Philippi Battery Charger ACE 12/30 is a fanless 12V automatic charger for the onboard power system of yachts, motorhomes, and off-road vehicles, charging one battery or up to three battery banks simultaneously with up to 30 A. It features an integrated P-BUS interface and Bluetooth app connectivity.
- Charges up to three battery banks simultaneously, e.g., house, starter, and bow thruster battery
- Fanless operation thanks to a heat sink integrated into the housing base – quiet, can also be installed in the engine room
- Wide input voltage range 90–265 V AC without power reduction – usable worldwide, even with weak shore power connections
- Pluggable AC/DC connections and temperature sensor already included – Plug & Play
The Philippi ACE 12/30 is suitable for use on board wherever multiple battery banks in the onboard power system need to be reliably charged – from a simple house battery to a complex system with starter, house, and bow thruster batteries. The appropriate charging characteristic for wet, lead-calcium, GEL, and AGM batteries, as well as lithium battery systems, can be selected via the control panel; a freely adjustable characteristic can also be parameterized via the PSM or PSL system monitors. In addition, a winter storage mode, a power supply mode, and a refresh function for battery maintenance are available.
In power supply mode, the ACE 12/30 provides a regulated and filtered DC power supply, for example, during the construction phase when no batteries are yet on board, or during a replacement phase. The charger comes with a power cable (1 m), temperature sensor (2.8 m), and DC connector plug.
| Feature | Value |
|---|---|
| Order No. (SKU) | 045123013 |
| Charging Current | 30 A |
| Nominal Voltage | 12 V |
| Outputs | 3 |
| Recommended Battery Capacity | 120–250 Ah |
| Charging Characteristics | 4-stage, adjustable (factory setting 14.4 V / 13.8 V), winter storage, power supply mode, refresh function |
| Battery Types | 7 charging programs for wet, lead-calcium, GEL, AGM batteries, and lithium battery systems |
| Input Voltage AC | 90–265 V / 47–65 Hz |
| Efficiency | 90% typical |
| Current Consumption 230 / 115 V | 1.7 / 3.4 A |
| Dimensions L x W x H | 236 x 180 x 96 mm |
| Weight | 2.1 kg |
| Cooling | Fanless convection cooling |
| Operating Temperature Range | -20 °C to 60 °C, power reduced above 55 °C |
| Protection Class | IP 22 |
| Electrical Protection | Against short circuit and overvoltage (fuse) |
| P-BUS Connection | Integrated |
Compatibility: The ACE 12/30 communicates via P-BUS with the Philippi system monitors PSM and PSL, and via Bluetooth with the associated app. It belongs to the ACE series for 12 V (ACE 12/30, 12/44, 12/64) and 24 V (ACE 24/25, 24/30).
How many battery banks can the ACE 12/30 charge simultaneously?
Up to three separate battery banks, for example, house, starter, and bow thruster battery.
Does the ACE 12/30 lose power at high temperatures?
No, up to an ambient temperature of approximately 55 °C, full charging power is available without reduction; only above this temperature is the power reduced.
Can I charge different battery types with the ACE 12/30?
Yes, it offers seven charging programs for wet, lead-calcium, GEL, and AGM batteries, as well as lithium battery systems.
Order the Philippi Battery Charger ACE 12/30 now – we will be happy to advise you on compatibility with your onboard power system.
⚠️Safety data sheet can be found under Downloads!
Downloads
Deutsche Downloads
