BullTron Wechselrichter 12 V/230 V 1000 W mit Netzvorrangschaltung
BullTron · BullTron LiFePO4 batteries
BullTron Inverter 12 V/230 V 1000 W with Mains Priority Switch
The BullTron 1,000 W inverter with mains priority switch (NVS) converts 12 V from the on-board battery into 230 V and switches to shore power automatically as soon as it is available. A 16 A circuit breaker and an RCD are built in. It delivers 1,000 W continuous and 2,000 W peak power for motorhomes, campers and boats.
In detail. BullTron Inverter 12 V/230 V 1000 W with Mains Priority Switch.
- Mains priority switch: changes over automatically between shore power and battery operation
- 16 A circuit breaker and RCD (30 mA) built in
- 1,000 W continuous and 2,000 W peak power
- Display, ECO/standard mode switch, on/off switch and remote control included
- Short-circuit protection for safe operation in the on-board system
Application.
The BullTron 1,000 W NVS inverter suits motorhomes, campers, boats and off-road vehicles that are sometimes connected to shore power in the marina or on the campsite and sometimes travel self-sufficiently. Your 230 V sockets hang on one device: when shore power is present, the energy comes from the grid, otherwise from the battery. No separate changeover switch is needed.
Technical data
| Feature | Value |
|---|---|
| Article number | W1000-12-NVFILS |
| EAN | 4262358250520 |
| Continuous power | 1,000 W |
| Peak power | 2,000 W |
| Input voltage | 12 V DC (10–15 V) |
| Output voltage | 230 V AC, 50 Hz ± 0.5 Hz |
| Mains priority switch | yes |
| Protection | 16 A circuit breaker, RCD 30 mA, short-circuit protection, IP20 |
| Controls | On/off switch, display with ECO/standard mode, remote control |
| Dimensions (L × W × H) | 352 × 197 × 82 mm |
| Weight | 3.3 kg |
| Warranty | 2 years, extendable to 5 years for a surcharge |
Manufacturer and product safety
Bulltron GmbH
Bei den Linden 7 a
21449 Radbruch
Deutschland
info@bulltron.de
Safety information: see the operating manual and data sheet.
Frequently asked questions. Answered briefly.
How does the mains priority switch work?
When shore power is available, the mains priority switch supplies your 230 V loads directly from the grid and the inverter stays off. If shore power fails or you unplug, the inverter automatically takes over the supply from the battery. You do not need to switch anything by hand or install a separate changeover switch.
Do I need an additional RCD and circuit breaker?
On the 230 V side, a 16 A circuit breaker and an RCD are already built in. You still need to fuse the 12 V supply cable to the battery properly and lay it with an adequate cross-section. The philippi team will gladly advise you on sizing the fuse and cable for your on-board system.
How is the NVS inverter operated?
The BullTron inverter with mains priority switch has an on/off switch and a display with a selector between ECO and standard mode. A remote control is included. The changeover between shore power and battery is automatic. The warranty is 2 years and can be extended to 5 years for a surcharge.
Goes well with it. Accessories and add-ons.
Prefer a quick chat?
Tell us what you are planning. We will tell you honestly what you need and what you don’t.
