philippi Academy · Digital onboard network

BullTron App: Connect the Battery, Settings, Restart the BMS

4 min readBy Michael KögelLast reviewed

In short

The Bulltron app for Android and Apple iOS shows the state of charge, cell voltages, charge cycles and heating status of a BullTron battery. The battery connects via Bluetooth or, on models with a Wi-Fi transmitter, via Wi-Fi. The “System” tab contains the BMS restart, the firmware update and the password change. The information comes from BullTron's manuals.

The Bulltron app for Android and Apple iOS shows the state of charge, cell voltages, charge cycles and heating status of a BullTron battery. The battery connects via Bluetooth or, on models with a Wi-Fi transmitter, via Wi-Fi. The “System” tab contains the BMS restart, the firmware update and the password change. The information comes from BullTron's manuals.

How do I connect the battery via Bluetooth?

Allow the Bulltron app access to location and Bluetooth. In the “Overview” tab, open the “Bluetooth” tab and tap the “OFF” symbol next to your battery. When it shows a green “ON”, the battery is connected. According to the manufacturer, a battery can only be connected to one smartphone at a time.

How do I connect the battery to Wi-Fi?

Create an account in the app: choose your country, enter your e-mail address and the confirmation code, and set an eight-character password. Then tap the green plus, choose the “Wifi devices” tab and enter your network and network password. While the battery is connected to Wi-Fi, Bluetooth is not possible. The manufacturer lists Wi-Fi as a beta version.

NoteNot every BullTron battery has a Wi-Fi transmitter. According to the manufacturer, the connection type is shown on the transmitter on the housing and in the data sheet. The Polar 80 Ah connects via Bluetooth only.

Why can't the app find my battery?

After one hour without charging or discharging current, the battery switches off its Bluetooth signal. A short current pulse or the “ON” button on the transmitter wakes it up again. Also check whether the battery is currently connected to Wi-Fi or already paired with another smartphone. In both cases Bluetooth is not available.

How do I change the password?

The factory code is “000000”, and the manufacturer asks you to change it. In the app, tap “Parameter settings” at the bottom right and open the “System settings” tab, where you will find “Change password”. After that, nobody can connect to the battery without your code, for example at a campsite or in a marina.

Which settings can I change?

In the “Settings” tab you can rename the battery, calibrate the state of charge to 100 % and set the time until Bluetooth switches off. “Low charging temperature” sets the temperature down to which the battery charges and is also the starting point of the heating. Alarms can be set to visual or acoustic, but they do not switch the battery off.

WarningDo not change the charging parameters. According to the manufacturer they are set optimally; changes can cause malfunctions and void the warranty.

When do I calibrate the state of charge to 100 %?

Only if the battery is at 14.2 V or more and the display does not go to 100 % by itself. You will find the command in the “Settings” tab. Also charge the battery fully at regular intervals, which keeps the display accurate. With batteries in parallel, different states of charge are normal according to the manufacturer.

How do I restart the BMS?

The “System” tab of the app contains the “Restart BMS” command. According to the manufacturer, the stored state-of-charge data is lost in the process. Afterwards, charge the battery to at least 14.2 V so the display is correct again. If the battery has shut down due to undervoltage, call us on +49 7146 87 44 0.

Do I need a firmware update?

Only if the software is not working correctly. “Firmware update” is in the “System” tab, and BullTron provides the update code. One exception is integration into the philippi P-Bus, which requires a one-time update of the battery. The procedure is described in Connecting a BullTron battery directly to the P-Bus.

You will find all BullTron batteries with heating, smart BMS and app in our BullTron LiFePO4 batteries overview. philippi is a BullTron wholesaler in Remseck am Neckar and advises on selection, installation and set-up.

Source: manufacturer's manuals “Bulltron App” and “Bulltron Battery Polar”, as of 11 Nov 2026.

· Managing Director, philippi elektrische systeme GmbH

Michael Kögel is Managing Director of philippi elektrische systeme GmbH in Remseck am Neckar. Since 1978, the family-owned company has developed and manufactured on-board electrical systems for yachts, motorhomes and special vehicles.

Diplom-Ingenieur (Dipl.-Ing.), electrical engineering, with philippi for more than 35 years. Articles in the philippi Academy are written together with the engineering department and technically reviewed.

Published · Last reviewed

Frequently asked questions. Answered briefly.

How do I connect a BullTron battery to the app via Bluetooth?

Allow the Bulltron app access to location and Bluetooth. In the “Overview” tab, open the “Bluetooth” tab and tap the “OFF” symbol next to your battery. When it shows a green “ON”, the battery is connected. According to the manufacturer, a battery can only be connected to one smartphone at a time.

Why can't the app find my battery?

After one hour without charging or discharging current, the battery switches off its Bluetooth signal. A short current pulse or the “ON” button on the transmitter wakes it up again. Also check whether the battery is currently connected to Wi-Fi or already paired with another smartphone. In both cases Bluetooth is not available.

How do I restart the BMS of a BullTron battery?

The “System” tab of the app contains the “Restart BMS” command. According to the manufacturer, the stored state-of-charge data is lost in the process. Afterwards, charge the battery to at least 14.2 V so the display is correct again. If the battery has shut down due to undervoltage, call us on +49 7146 87 44 0.

Technical

Your case isn't covered?
Ask us.

Our team knows every component and usually replies on the same working day, by email or by phone.

philippi tote bag and catalogue