• philippi Bavaria Refit-Panel 20 – steckfertiges Austauschpanel
  • philippi Bavaria Refit-Panel – Detailansicht
  • philippi Bavaria Refit-Panel 20 – steckfertiges Austauschpanel
  • philippi Bavaria Refit-Panel – Detailansicht
philippi

Bavaria Refit Panel 20

Zuletzt aktualisiert:

Art.-Nr.: 030230020

€1.349,00
€1.349,00
Sale Sold out
Tax included. Shipping calculated at checkout.
Verfügbar – In 2–3 Werktagen bei Ihnen zu Hause

The Bavaria Refit-Panel 20 is a plug-and-play 1:1 replacement panel for power distribution in the factory-installed Bavaria Panel 20, modernizing your yacht's onboard electronics without altering existing wiring.

Only the visible control unit is replaced and connected via the boat's existing cable connector.

  • Plug-and-play thanks to pre-assembled wiring harness – simple, secure installation
  • Circuits with thermal rocker circuit breakers, as well as DC and USB-C/A charging sockets
  • Tank and battery monitoring via the integrated BTM 2 monitor
  • Includes Tank Interface TIL for two fresh water and one waste water brush probe
  • Includes shore power unit with RCB circuit breaker 16 A / 30 mA
  • Optional battery management via Shunt SHE 348 (sold separately) – always keep an eye on the charge status of lithium or lead batteries
  • Dimensions: W 350 x H 300 x D 90 mm

Scope of delivery: Panel with pre-assembled wiring harness, Tank Interface TIL, integrated BTM 2 monitor, and shore power unit. The Shunt SHE 348 is optional and ordered separately; installation takes place near the consumer batteries (usually under the saloon settees).

Does the Refit-Panel 20 fit 1:1 into my Bavaria yacht? Yes. The installation dimensions (W 350 x H 300 x D 90 mm) correspond to the factory-installed Panel 20. Only the visible control unit is replaced and connected via the existing boat-side cable connector.

What is included in the scope of delivery? The panel with pre-assembled wiring harness, the Tank Interface TIL, the shore power unit, and the integrated BTM 2 monitor.

What else do I need to order? For battery management, the Shunt SHE 348 – this is optional and ordered separately.

Which batteries can I monitor? Both lithium and lead batteries; the BTM 2 in conjunction with the Shunt SHE 348 handles capacity monitoring.

How complex is the installation? Low: The panel is pre-wired for plug-and-play, no modification of the existing wiring is necessary.

Frequently Asked Questions

Which tank sensors can I monitor with the Tank Interface TIL?

The included Tank Interface TIL is designed for two fresh water and one waste water brush probe.

What charging connections does the panel offer?

The panel features circuits with DC and a combined USB-C/A charging socket.

How is the integrated shore power unit protected?

Via an RCB circuit breaker with 16 A / 30 mA.

Is there also a smaller panel variant?

Yes, the Bavaria Refit-Panel 16 with dimensions W 235 x H 250 x D 60 mm for the correspondingly smaller Bavaria standard equipment.

Kontaktdaten des Herstellers:

philippi elektrische systeme GmbH
Neckaraue 19
D-71686 Remseck am Neckar

⚠️Safety data sheet can be found under Downloads!
⭳ Downloads

Deutsche Downloads

Fittingly
Tank interface (TIL / TIL #2)
philippi
Tank interface (TIL / TIL #2)
€89,00
€89,00
philippi LIN-Bus Batterie Management Shunt SHE 348 – präzise Lade-/Entladestrom-Erfassung
philippi
LIN-Bus Battery Management Shunt SHE 348
€119,00
€119,00
philippi Bavaria Refit-Panel 20 – steckfertiges Austauschpanel
Bavaria Refit Panel 20
€1.349,00
€1.349,00

Highlights
philippi Bavaria Refit-Panel 20 – steckfertiges Austauschpanel philippi Bavaria Refit-Panel 20 – steckfertiges Austauschpanel

Out with the old. In with REFIT.

Our REFIT panels have been specially developed for 1:1 replacement of the original panels. Thanks to the precisely replicated dimensions and mounting points, they fit perfectly into existing cutouts and mounting systems.

Existing screws, fasteners, and installation locations can continue to be used. This means that no enlargement of cutouts and no elaborate modifications are necessary. Remove original panel, insert REFIT panel – simple, quick, and perfectly fitting.

BTM 2 – The smart battery, tank, and charging monitor for maximum control

The BTM 2 combines modern design with powerful technology: a brilliant 3.5” color touch display with automatic brightness adjustment ensures intuitive operation and perfect readability – at all times and under all conditions.

Thanks to the integrated NMEA 2000 interface, all battery and tank data can be seamlessly integrated into the onboard network and conveniently displayed on compatible plotters. At the same time, the BTM 2 impresses with its particularly low standby consumption, so it can remain reliably connected to the battery permanently.

Precise real-time data on voltage, current, state of charge, remaining runtime, and temperature give you full control over your power supply. Solar systems and various tank sensors can also be flexibly integrated.

Intelligent alarm and energy management actively protects your battery from deep discharge – ideal, especially for modern lithium systems.

Technology that endures

For our panels, we deliberately rely on replaceable, mechanical circuit breakers – for maximum reliability and easy maintenance. Thanks to their well-thought-out design, the components can be replaced quickly and easily, which reduces downtime to a minimum.

Circuit breakers with a current of 10 A are installed as standard. Alternatively, circuit breakers with
currents of 6 A, 10 A, 16 A and 20 A can be used.

The integrated protection function makes additional fuses superfluous and simultaneously ensures a high level of
operational safety. Since these are purely mechanical solutions, no additional energy is required for electronics or relays.

Plug and play instead of rewiring

Our REFIT panels are supplied with a suitable wiring harness, allowing for particularly easy retrofitting. Existing connections can be directly re-plugged, so there is no need to lay new cables or make extensive adjustments to the wiring.

This significantly reduces installation effort, saves time, and enables quick replacement while achieving a professional result.

Built to last

Our aluminum panels stand for uncompromising quality, modern design, and exceptional durability. Crafted from lightweight, high-strength aluminum, they combine stability with elegant lightness – perfect for demanding applications.

The exclusive powder coating, inspired by proven maritime processes, not only reliably protects against external influences but also gives each panel a noble, distinctive surface. In combination with our specially developed color palette, a unique look is created that clearly stands out from the crowd.

For the final refinement, we rely on precise screen printing. The result: razor-sharp, high-contrast representations with high color brilliance and lasting visibility – even with intensive use.

Our FAQ

Here you will find our customers' most frequently asked questions!

A refit panel replaces your yacht's existing original switch panel with a modern electrical system including battery and tank monitoring – without extensive modifications.

No. The Refit panel comes with a completely pre-assembled wiring harness that is already equipped with the appropriate 14-pin and 6-pin connectors. All that is required is to connect both plugs to the existing on-board system.

BAV301 replaces panels with hinges (original C38, C42), BAV303 replaces fixed screwed panels. BAV16 and BAV20 are intended for sailing yachts built around 2000 with the original panel 16 or 20 respectively. The STV726 (BMB16 Refit) replaces the 15-way panel of BMB motor yachts built between 2000 and 2004.

The retrofit panels are equipped with a 3.5" touch display and the BTM2 monitor. The necessary SHE 348 shunt must be ordered separately, depending on the model. The TIL tank interface is available for fresh and waste water tanks; an additional TIL#2 is required for a second waste water tank.

Yes. A panel refit is also possible for yachts from other manufacturers and for custom builds. We have already completed more than 500 refits – just get in touch with us.

Contact our team by phone or email with the model and year of your yacht. We will work with you to determine which refit panel matches your original panel.

Customers Also Bought...

We help you make the right decision.

Not sure about the selection, equipment, or application? Our experts will advise you personally and find the right solution for your project together.

Book a consultation now

Finding the right fuel level sensor

Discover our range and find the fuel sender that perfectly suits your application.

Discover tank senders

Design the panel to your specifications

With our manufacture, you can design your panel according to your wishes.

Configure panel