• Home
  • Bavaria Refit Panel 20
  • philippi Bavaria Refit-Panel 20 – steckfertiges Austauschpanel
  • philippi Bavaria Refit-Panel – Detailansicht
  • philippi Bavaria Refit-Panel 20 – steckfertiges Austauschpanel
  • philippi Bavaria Refit-Panel – Detailansicht
philippi

Bavaria Refit Panel 20

Art.-Nr.: 030230020

Identical dimensions to the previous solution

Upgrading your BAVARIA

€1.349,00
€1.349,00
Sale Sold out
Tax included. Shipping calculated at checkout.
Verfügbar – In 2–3 Werktagen bei Ihnen zu Hause

The Bavaria Refit-Panel 20 by philippi is a plug-and-play 1:1 replacement panel for the Bavaria Panel 20 installed ex works. You can modernize your onboard electrical system without changing the existing wiring: only the visible control unit is replaced and connected via the boat-side cable connector.

Your Advantages

  • Plug-and-play thanks to pre-assembled cable harness – easy, safe installation
  • Tank and battery monitoring via the integrated BTM 2 monitor
  • Included TIL tank interface for two fresh water and one waste water brush probe
  • Optional battery management via SHE 348 shunt – monitor the charge status of lithium or lead batteries at any time

Scope of Delivery & Notes

Panel with pre-assembled cable harness, TIL tank interface, and integrated BTM 2 monitor. The SHE 348 shunt is optional and must be ordered separately; installation takes place near the consumer batteries (usually under the saloon settees).

Dimensions: W 350 × H 300 mm

Developed and manufactured in Germany. Unsure if the panel fits your yacht? Our team will advise you personally.

Frequently Asked Questions

Does the Refit-Panel 20 fit 1:1 into my Bavaria yacht?
Yes. The installation dimensions (W 350 × H 300 mm) correspond to the Panel 20 installed ex works. Only the visible control unit is replaced and connected via the existing boat-side cable connector.

What is included in the scope of delivery?
The panel with pre-assembled cable harness, the TIL tank interface, and the integrated BTM 2 monitor.

What else do I need to order?
For battery management, the SHE 348 shunt – this is optional and ordered separately.

Which batteries can I monitor?
Both lithium and lead batteries; the capacity monitoring is performed by the BTM 2 in conjunction with the SHE 348 shunt.

How complex is the installation?
Low: The panel is pre-assembled plug-and-play, no modification of the existing wiring is necessary.

Kontaktdaten des Herstellers:

philippi elektrische systeme GmbH
Neckaraue 19
D-71686 Remseck am Neckar

⚠️Safety data sheet can be found under Downloads!
⭳ Downloads

Deutsche Downloads

Fittingly
Tank interface (TIL / TIL #2)
philippi
Tank interface (TIL / TIL #2)
€89,00
€89,00
philippi LIN-Bus Batterie Management Shunt SHE 348 – präzise Lade-/Entladestrom-Erfassung
philippi
LIN-Bus Battery Management Shunt SHE 348
€119,00
€119,00
philippi Bavaria Refit-Panel 20 – steckfertiges Austauschpanel
Bavaria Refit Panel 20
€1.349,00
€1.349,00

Highlights

philippi Bavaria Refit-Panel 20 – steckfertiges Austauschpanel philippi Bavaria Refit-Panel 20 – steckfertiges Austauschpanel

Out with the old. In with REFIT.

Our REFIT panels have been specially developed for 1:1 replacement of the original panels. Thanks to the precisely replicated dimensions and mounting points, they fit perfectly into existing cutouts and mounting systems.

Existing screws, fasteners, and installation locations can continue to be used. This means that no enlargement of cutouts and no elaborate modifications are necessary. Remove original panel, insert REFIT panel – simple, quick, and perfectly fitting.

BTM 2 – The smart battery, tank, and charging monitor for maximum control

The BTM 2 combines modern design with powerful technology: a brilliant 3.5” color touch display with automatic brightness adjustment ensures intuitive operation and perfect readability – at all times and under all conditions.

Thanks to the integrated NMEA 2000 interface, all battery and tank data can be seamlessly integrated into the onboard network and conveniently displayed on compatible plotters. At the same time, the BTM 2 impresses with its particularly low standby consumption, so it can remain reliably connected to the battery permanently.

Precise real-time data on voltage, current, state of charge, remaining runtime, and temperature give you full control over your power supply. Solar systems and various tank sensors can also be flexibly integrated.

Intelligent alarm and energy management actively protects your battery from deep discharge – ideal, especially for modern lithium systems.

Technology that endures

For our panels, we deliberately rely on replaceable, mechanical circuit breakers – for maximum reliability and easy maintenance. Thanks to their well-thought-out design, the components can be replaced quickly and easily, which reduces downtime to a minimum.

Circuit breakers with a current of 10 A are installed as standard. Alternatively, circuit breakers with
currents of 6 A, 10 A, 16 A and 20 A can be used.

The integrated protection function makes additional fuses superfluous and simultaneously ensures a high level of
operational safety. Since these are purely mechanical solutions, no additional energy is required for electronics or relays.

Plug and play instead of rewiring

Our REFIT panels are supplied with a suitable wiring harness, allowing for particularly easy retrofitting. Existing connections can be directly re-plugged, so there is no need to lay new cables or make extensive adjustments to the wiring.

This significantly reduces installation effort, saves time, and enables quick replacement while achieving a professional result.

Built to last

Our aluminum panels stand for uncompromising quality, modern design, and exceptional durability. Crafted from lightweight, high-strength aluminum, they combine stability with elegant lightness – perfect for demanding applications.

The exclusive powder coating, inspired by proven maritime processes, not only reliably protects against external influences but also gives each panel a noble, distinctive surface. In combination with our specially developed color palette, a unique look is created that clearly stands out from the crowd.

For the final refinement, we rely on precise screen printing. The result: razor-sharp, high-contrast representations with high color brilliance and lasting visibility – even with intensive use.

FAQ

Yes, this is possible. For this, the required fuse size per circuit must be specified when ordering the switch panel.

Yes, before each switchboard, a main fuse must be integrated into the supply line to the switchboard near the battery.

Yes, all common sensors used in the marine and automotive sectors can be connected.
ALL FAQs

Still unsure?

Book your personal consultation now and gain clarity for your project.

Book a consultation now

Fuel sender

Still unsure which fuel sender is the right one?

discover now

Configure panel

With our factory, you can design your panel according to your wishes.

Discover now

Customers Also Bought...