The Philippi Charge Booster DCE 36V is a battery-to-battery charger with a 36V input for yachts, motorhomes, and vehicles. It uses the alternator while driving to quickly and fully charge service batteries with 12V, 24V, 36V, or 48V output voltage, reliably compensating for voltage fluctuations and line losses. In the Philippi catalog, this series is technically listed as DCB and for 36V input systems under the designation DCE.
- Correct charging with a three-stage characteristic curve – better utilization of alternator power for fast, optimal charging
- Adjustable characteristic curves for lead-acid, gel, AGM, and lithium-ion batteries
- Soft start reduces stress on the V-belt during startup, fanless operation for maximum comfort
- System integration via P-Bus with a Philippi System Monitor (matching cable ACE-T-HPO)
- Current limitation adapts the charging current to existing cable cross-sections, power supply mode also possible without a battery at the output
The Philippi Charge Booster DCE 36V compensates for the typical problem of conventional and smart alternators: After a short time, the charging voltage drops, and voltage spikes also occur during braking. The DCE 36V regulates this into a clean, three-stage charging curve, ensuring a complete charge of the service battery – even with long cable runs between the alternator and the battery.
Depending on the required output voltage, the Philippi Charge Booster DCE 36V allows, for example, charging or stabilizing a 12V or 24V on-board network from a 36V on-board system without installing a second alternator. All models are fanless and therefore operate silently during continuous operation.
| Output | SKU | Input / Output | Charging Current |
| DC12V | 046361240 | 36 V / 12 V | 40 A |
| DC24V | 046362430 | 36 V / 24 V | 30 A |
| DC36V | 046363620 | 36 V / 36 V | 20 A |
| DC48V | 046364815 | 36 V / 48 V | 15 A |
Further technical data (all variants):
| Protection class | IP 22 |
| Dimensions | 236 x 180 x 96 mm |
| Weight | 2.2 kg |
| Connection | M 8 |
| Efficiency | > 96 % |
| Operating temperature | -20°C to +60°C |
| Alternator temperature sensor | Temp-HT (accessory) |
Compatibility
- P-Bus system integration with the Philippi System Monitor via the ACE-T-HPO cable
- Optional alternator temperature sensor Temp-HT for temperature-dependent regulation
- Adjustable for lead-acid, gel, AGM, and lithium batteries in the on-board network
Frequently Asked Questions
What output voltages are available with the Philippi Charge Booster DCE 36V?
The Charge Booster DCE 36V is available with a 36V input and optionally 12V, 24V, 36V, or 48V output, with charging currents between 15 A and 40 A depending on the output voltage.
Can the Charge Booster DCE 36V also be operated without a battery at the output?
Yes, all models have a power supply mode and can also be operated without a connected battery at the output.
Is the Charge Booster DCE 36V compatible with lithium batteries?
Yes, the characteristic curve is adjustable for lead-acid, gel, AGM, and lithium-ion batteries.
Can the Charge Booster DCE 36V be integrated into an existing Philippi on-board network?
Yes, system integration with a Philippi System Monitor is possible via the P-Bus connection and the ACE-T-HPO cable.
Does the Charge Booster DCE 36V require ventilation?
No, the Charge Booster DCE 36V operates fanless and therefore silently.
Inquire about the Philippi Charge Booster DCE 36V now and choose the appropriate output voltage.
⚠️Safety data sheet can be found under Downloads!
Downloads
Deutsche Downloads
