The Philippi Charge Booster DCB 24V is a battery-to-battery charger with a 24V input for yachts, motorhomes, and vehicles. It uses the alternator while driving to quickly and fully charge service batteries with 12V, 24V, 36V or 48V output voltage, reliably compensating for voltage fluctuations and line losses.
- Correct charging with three-stage characteristic curve – better utilization of alternator power for fast, optimal charging
- Adjustable characteristic curves for lead-acid, gel, AGM, and lithium-ion batteries
- Soft start relieves the V-belt during startup, fanless operation for maximum comfort
- System integration via P-Bus with a Philippi System Monitor (suitable cable ACE-T-HPO)
- Current limitation adapts the charging current to existing cable cross-sections, power supply mode also possible without a battery at the output
The DCB 24V charge booster from Philippi compensates for the typical problem of conventional and intelligent alternators: after a short time, the charging voltage drops, and voltage peaks also occur during braking. The DCB 24V regulates this into a clean, three-stage charging characteristic curve, ensuring a full charge of the service battery – even with long cable runs between the alternator and the battery.
Depending on the required output voltage, the Philippi DCB 24V charge booster allows, for example, charging a 12V battery from a 24V onboard electrical system without installing a second alternator. It is also possible to stabilize the 24V onboard electrical system to supply sensitive consumers. All models are fanless and therefore silent in continuous operation.
| Output | SKU | Input / Output | Charging Current |
| DC12V | 046241261 | 24 V / 12 V | 60 A |
| DC24V | 046242431 | 24 V / 24 V | 30 A |
| DC36V | 046243620 | 24 V / 36 V | 20 A |
| DC48V | 046244815 | 24 V / 48 V | 15 A |
Further technical data (all variants):
| Protection class | IP 22 |
| Dimensions | 236 x 180 x 96 mm |
| Weight | 2.2 kg |
| Connection | M 8 |
| Efficiency | > 96 % |
| Operating temperature | -20°C to +60°C |
| Alternator temperature sensor | Temp-HT (accessory) |
Compatibility
- P-Bus system integration with the Philippi System Monitor via the ACE-T-HPO cable
- Optional alternator temperature sensor Temp-HT for temperature-dependent regulation
- Adjustable for lead-acid, gel, AGM, and lithium batteries in the onboard electrical system
Frequently Asked Questions
Which output voltages are available for the Philippi Charge Booster DCB 24V?
The DCB 24V charge booster is available with a 24V input and optionally 12V, 24V, 36V, or 48V output, with charging currents between 15 A and 60 A depending on the output voltage.
Can the DCB 24V charge booster also be operated without a battery at the output?
Yes, all models feature a power supply mode and can also be operated without a connected battery at the output.
Is the DCB 24V charge booster compatible with lithium batteries?
Yes, the characteristic curve is adjustable for lead-acid, gel, AGM, and lithium-ion batteries.
Can the DCB 24V charge booster be integrated into an existing Philippi onboard electrical system?
Yes, system integration with a Philippi System Monitor is possible via the P-Bus connection and the ACE-T-HPO cable.
Does the DCB 24V charge booster require ventilation?
No, the DCB 24V charge booster operates fanless and is therefore silent.
Enquire about the Philippi Charge Booster DCB 24V now and choose the appropriate output voltage.
⚠️Safety data sheet can be found under Downloads!
Downloads
Deutsche Downloads
