• Home
  • Bavaria Refit Panel 301
  • philippi Bavaria Refit-Panel 301 – steckfertiges Austauschpanel mit Monitor BTM 2
  • Bavaria Refit-Panel 301 – Detailansicht
  • Bavaria Refit-Panel 301 – Ansicht
  • philippi Bavaria Refit-Panel 301 – steckfertiges Austauschpanel mit Monitor BTM 2
  • Bavaria Refit-Panel 301 – Detailansicht
  • Bavaria Refit-Panel 301 – Ansicht
philippi

Bavaria Refit Panel 301

Art.-Nr.: 030183011

Easy replacement thanks to suitable connectors

Significantly reduces the baseline power consumption

€989,00
€989,00
Sale Sold out
Tax included. Shipping calculated at checkout.
Verfügbar – In 2–3 Werktagen bei Ihnen zu Hause

The Bavaria Refit-Panel 301 by Philippi is a plug-and-play 1:1 replacement panel for the factory-installed Panel 301 in Bavaria sailing yachts. You can modernize your onboard electrics without changing the existing wiring: Only the visible control unit is replaced and connected via the boat's existing cable connector.

Your Advantages

  • Plug-and-play thanks to pre-assembled cable harness – easy, secure installation
  • Tank and battery monitoring via the integrated BTM 2 monitor
  • Included TIL tank interface for two fresh water and one waste water level sensor
  • Optional battery management via SHE 348 shunt – always keep an eye on the state of charge of your lithium or lead battery

Scope of Delivery & Notes

Panel with pre-assembled cable harness, TIL tank interface, and integrated BTM 2 monitor. The SHE 348 shunt is optional and must be ordered separately; installation takes place near the consumer batteries (usually under the salon seating benches).

Dimensions: W 265 × H 210 × D 70 mm

Developed and manufactured in Germany. Unsure if the panel fits your yacht? Our team will advise you personally.

Frequently Asked Questions

Does the Refit-Panel 301 fit 1:1 into my Bavaria yacht?
Yes. The installation dimensions (W 265 × H 210 × D 70 mm) correspond to the factory-installed Panel 301. Only the visible control unit is replaced and connected via the existing boat-side cable connector.

What is included in the scope of delivery?
The panel with pre-assembled cable harness, the TIL tank interface, and the integrated BTM 2 monitor.

What do I need to order in addition?
For battery management, the SHE 348 shunt – this is optional and ordered separately.

Which batteries can I monitor?
Both lithium and lead batteries; the BTM 2 in conjunction with the SHE 348 shunt handles capacity monitoring.

How complex is the installation?
Low: The panel is pre-assembled plug-and-play, no modification of the existing wiring is necessary.

Kontaktdaten des Herstellers:

Navico Group EMEA B.V.
Snijdersbergweg 93
1105AN Amsterdam

⚠️Safety data sheet can be found under Downloads!
⭳ Downloads

Deutsche Downloads

Fittingly
philippi LIN-Bus Batterie Management Shunt SHE 348 – präzise Lade-/Entladestrom-Erfassung
philippi
LIN-Bus Battery Management Shunt SHE 348
€119,00
€119,00
philippi LIN-Bus Shunt SHP 348 – präzise Strommessung für Solar und Ladequelle
philippi
LIN-Bus Shunt SHP 348
€119,00
€119,00
Tank interface (TIL / TIL #2)
philippi
Tank interface (TIL / TIL #2)
€89,00
€89,00
NMEA2000 Adapter Cable N2K Cable
philippi
NMEA2000 Adapter Cable N2K Cable
€49,00
€49,00
philippi Bavaria Refit-Panel 301 – steckfertiges Austauschpanel mit Monitor BTM 2
Bavaria Refit Panel 301
€989,00
€989,00

Highlights

philippi Bavaria Refit-Panel 301 – steckfertiges Austauschpanel mit Monitor BTM 2 philippi Bavaria Refit-Panel 301 – steckfertiges Austauschpanel mit Monitor BTM 2

Out with the old. In with REFIT.

Our REFIT panels have been specially developed for 1:1 replacement of the original panels. Thanks to the precisely replicated dimensions and mounting points, they fit perfectly into existing cutouts and mounting systems.

Existing screws, fasteners, and installation locations can continue to be used. This means that no enlargement of cutouts and no elaborate modifications are necessary. Remove original panel, insert REFIT panel – simple, quick, and perfectly fitting.

BTM 2 – The smart battery, tank, and charging monitor for maximum control

The BTM 2 combines modern design with powerful technology: a brilliant 3.5” color touch display with automatic brightness adjustment ensures intuitive operation and perfect readability – at all times and under all conditions.

Thanks to the integrated NMEA 2000 interface, all battery and tank data can be seamlessly integrated into the onboard network and conveniently displayed on compatible plotters. At the same time, the BTM 2 impresses with its particularly low standby consumption, so it can remain reliably connected to the battery permanently.

Precise real-time data on voltage, current, state of charge, remaining runtime, and temperature give you full control over your power supply. Solar systems and various tank sensors can also be flexibly integrated.

Intelligent alarm and energy management actively protects your battery from deep discharge – ideal, especially for modern lithium systems.

Technology that endures

For our panels, we deliberately rely on replaceable, mechanical circuit breakers – for maximum reliability and easy maintenance. Thanks to their well-thought-out design, the components can be replaced quickly and easily, which reduces downtime to a minimum.

Circuit breakers with a current of 10 A are installed as standard. Alternatively, circuit breakers with
currents of 6 A, 10 A, 16 A and 20 A can be used.

The integrated protection function makes additional fuses superfluous and simultaneously ensures a high level of
operational safety. Since these are purely mechanical solutions, no additional energy is required for electronics or relays.

Plug and play instead of rewiring

Our REFIT panels are supplied with a suitable wiring harness, allowing for particularly easy retrofitting. Existing connections can be directly re-plugged, so there is no need to lay new cables or make extensive adjustments to the wiring.

This significantly reduces installation effort, saves time, and enables quick replacement while achieving a professional result.

Built to last

Our aluminum panels stand for uncompromising quality, modern design, and exceptional durability. Crafted from lightweight, high-strength aluminum, they combine stability with elegant lightness – perfect for demanding applications.

The exclusive powder coating, inspired by proven maritime processes, not only reliably protects against external influences but also gives each panel a noble, distinctive surface. In combination with our specially developed color palette, a unique look is created that clearly stands out from the crowd.

For the final refinement, we rely on precise screen printing. The result: razor-sharp, high-contrast representations with high color brilliance and lasting visibility – even with intensive use.

FAQ

Yes, this is possible. For this, the required fuse size per circuit must be specified when ordering the switch panel.

Yes, before each switchboard, a main fuse must be integrated into the supply line to the switchboard near the battery.

Yes, all common sensors used in the marine and automotive sectors can be connected.
ALL FAQs

Still unsure?

Book your personal consultation now and gain clarity for your project.

Book a consultation now

Fuel sender

Still unsure which fuel sender is the right one?

discover now

Configure panel

With our factory, you can design your panel according to your wishes.

Discover now

Customers Also Bought...