The shore power unit LAE 234 LGW is a power distribution system from Philippi for boats and yachts, which enables a safe switch between shore power and generator using a shore-generator (LG) or shore-generator-inverter switch (LGW). It secures four 230 V output circuits and is suitable for the Series 200 circuit distributors.
- Safe switching between shore power and onboard generator without rewiring
- Protection of people and the onboard electrical system through RCBO circuit breakers and back-of-hand safe, touch-protected design
- Perfectly matching addition to Series 200 switch panels
- Immediately ready for use thanks to the included SKZ labeling set and mounting screws
The shore power unit LAE 234 LGW indicates the status of the power supply via 3 mains indicator lights and an AC voltmeter 230 V and distributes the power to four two-pole fused output circuits. Connection is made via terminals on the rear; the rear electrical structure is designed to be back-of-hand safe for protection against electric shock, so the panel must be installed in such a way that the rear is only accessible and covered with tools.
If the distance to the feed-in point is more than 3 m, the supply line must be additionally secured there by means of an MCB circuit breaker (e.g. LAE 205). For higher current capacities as well as a version without inverter (LAE 234 LG) or for combined inverter systems (LAE 234 LGK), versions are available on request.
| Feature | Value |
|---|---|
| Switch | Shore-Generator (LG) or Shore-Generator-Inverter (LGW) |
| Circuit breaker | RCBO 16 A / 30 mA |
| Mains indicator lights | 3 |
| Voltmeter | AC 230 V |
| Output circuits | 4 x 230 V / 50 Hz, each via two-pole thermal circuit breaker 10 A |
| Connection | rear terminals |
| Dimensions | W 210 x H 210 x D 110 mm |
| Cut-out dimensions | 186 x 186 mm (up to 12 mm per edge smaller than panel dimensions) |
| Order no. | 0 1000 2341 |
The LAE 234 LGW is suitable for Philippi's Series 200 circuit distributors. A SKZ-MOBIL labeling set for vehicle installation is also available on request.
Frequently Asked Questions
Is the LAE 234 LGW compatible with the Series 200 circuit distributors?
Yes, the shore power unit is suitable for the Series 200 circuit distributors.
Do I need to plan for an additional circuit breaker for the supply line?
Yes, if the distance to the feed-in point is more than 3 m, the supply line must be additionally secured there with an MCB circuit breaker (e.g. LAE 205).
How many circuits are available and how are they protected?
4 output circuits for AC 230 V / 50 Hz, each protected by two-pole thermal circuit breakers with 10 A; the main feed is additionally protected by an RCBO circuit breaker (16 A / 30 mA).
What should the cut-out dimensions be?
The cut-out can be up to 12 mm per edge smaller than the panel dimensions (210 x 210 mm), i.e. 186 x 186 mm.
Order now or contact us for advice on compatibility with your Series 200 switch panel.
⚠️Safety data sheet can be found under Downloads!
Downloads
