Do you only need to cleanly fuse a single circuit – for example, for an auxiliary pump or a retrofitted device? The STV 101 is made for exactly that: one circuit, one thermal circuit breaker (E-T-A 1140) with LED function display, done. Switch and fuse are combined in one component – no separate fuse is needed.
Why not a larger panel right away?
If you really only want to add one consumer, with the STV 103 (3 circuits) or STV 105 (5 circuits, from €180) you pay for capacity you don't need. The STV 101 is the lean, inexpensive solution for exactly one circuit.
At a glance
- 1 circuit, thermal circuit breaker (E-T-A 1140), rated current 8 A (optional 4/6/10/12/16 A)
- For 12 V and 24 V (DC)
- Dimensions: W 110 × H 36.2 × D 70 mm
Developed and manufactured in Germany.
Frequently asked questions
Is one circuit really enough, or should I plan for larger right away?
If you can foresee that additional consumers will be added in the next few years, the slightly larger STV 103 (3 circuits) is often worthwhile now – retrofitting later usually means a completely new panel.
Do I need to install separate fuses?
No, the switch and fuse are combined in one component.
Dimensions
Width: 12
Length: 18
Height: 10
Downloads
Deutsche Downloads
FAQ
Yes, this is possible. For this, the required fuse size per circuit must be specified when ordering the switch panel.
Yes, before each switchboard, a main fuse must be integrated into the supply line to the switchboard near the battery.
Yes, all common sensors used in the marine and automotive sectors can be connected.
