Installation

Bus bar

SMS7

SMS7AMS7 SMS AMS

Compact bus bar with 5 outlets and 2 lead connections. Ideal for connection the negative leads in small network installations.

Matching cover AMS 7 in plastic to clip-on on the bolts.

 

 

Dimensions W 107 x H 22 x D 22 mm


SMS 7 Order-no.: 700102304


Cover AMS 7 Order-no.: 700102713



Info

SMS 12

SMS12 AMS12


Compact bus bar with 20 outlets and 2 lead connections. (1/4” thread bolts). For lugs diameter 4 (6) mm². Ideal for connection the negative leads in small network installations. Matching cover AMS 12 for plug-on to the screw bolts.


Dimensions           L 155 x W 32 x H 32 mm


SMS 12 Order-no.: 700102301


Abdeckung AMS 12 Order-no.: 700102715



Info

SMS22

SMS22 AMS22 SMS 22

Compact bus bar with 20 outlets and 2 lead connections. Ideal for connection the negative leads in network installations.

Matching cover AMS 22 in plastic to clip-on on the bolts.

 

 

Dimensions W 235 x H 32 x D 32 mm


SMS 22 Order-no.: 700102302


Cover AMS 22 Order-no.: 700102716



Info

SMS14

SMS14

Compact double bus bar with 5 consumer (10-32 screws) and 2 cable - connections (1 / 4 "bolts). Ring cable cap with 4 mm / 6 mm

Incl. removable transparent cover.

 

 

Dimensions L 124 x W 66 x H 39 mm


SMS 14 Order-no.: 700102722



Info

MSB 4

MSB4 MSB

High standard negative pole bus bar for larger installations. Suitable for battery leads to windlass, bow thrusters and other consumers. The rated cross section of the bus bar carries 300 mm². It’s made of electro tin plated copper bar mounted on plastic isolation blocks.

 

MSB 3fits 3 x up to 95 mm² (M10) lugs or terminals
Dimensions L 150 x W 39 x H 55 mm
MSB 3fits 4 x up to 95 mm² (M10) lugs or terminals
Dimensions L 180 x W 39 x H 55 mm

 

 

 


MSB 4 Order-no.: 080009004



Info

MSB 6

MSB6

High standard negative pole bus bar for larger installations. Suitable for

battery leads to windlass, bow thrusters and other consumers. The rated

cross section of the bus bar carries 300 mm². It’s made of electro tin plated

copper bar mounted on plastic isolation blocks.

Fits 6 x 95 mm² (M10) lugs or terminals.

Dimensions L 240 x W 39 x H 55 mm


MSB 6 Order-no.: 080009006



Info

MSS 9

MSS9 MSS

High standard negative pole bus bar for larger installations. Suitable for battery leads to windlass, bow thrusters and other consumers. The rated cross section of the bus bar carries 300 mm². It’s made of electro tin plated copper bar mounted on plastic isolation blocks.

 

 

Fits: 4 x 95 mm² (M8) und 5 x 25 mm² (M6) lugs o. terminals.

Dimensions L 238 x W 39 x H 42 mm


MSS 9 Order-no.: 080009045



Info

EKS

EKS

Installation bolt M10. Screw thread 25 mm.

Dimensions: L 32 x W 28 x H 45 mm


EKS Order-no.: 616900147



Info

SSP 1

SSP1 SSP

Central mounting base with screw and bolt l 9,5 mm. Two drilled holes l 6,3 mm for attaching base. Cover included

 

 

Dimensions L 90 x W 50 x H 57 mm


SSP 1 Order-no.: 700102003



Info

SSP 1-8

SSP1/8 SSP

Central mounting base with 8 additional fasteners. Screw and bolt l 9,5 mm. Two drilled holes l 6,3 mm for attaching base

 

 

Dimensions L 90 x W 50 x H 57 mm


SSP 1-8 Order-no.: 700102103



Info

SSP 2

SSP2 SSP

Two pole cable connector. Socket threaded bolt l 9.5 mm. There are two mounting holes l 6.3mm at the base. Cap is included.


SSP 2 Order-no.: 700102017



Info

FSB 3

FSB3 FSB

By screw on flat slots block. For flat terminals

6,3 mm. 3 separate potentials with each 4 terminals possibilities.

Dimensions L 53 x W 36 x H 22 mm


FSB 3 Order-no.: 613886033



Info

DFB

DFBschwarz DFB

Terminal feed through connector (black) with M8 terminals pins. Fitting hole l 17,5 mm

 

 

Dimensions (Front) H 51 x W 32 mm


DFB black Order-no.: 700102203


DFB rot Order-no.: 700102204



Info

Dual PowerPost - One 5/16"-18 and One 3/8"-16 Studs

BS2018 / BS 2018

Dual PowerPost Cable Connectors
Provides a termination point for extending the length of
outboard harnesses or other conductors
• Designed for connecting high amperage conductors
• 2018 is also designed for outboard engine installation
when factory cables need to be extended
• One-piece serrated flange nuts ensure correct and secure connections

Continuous Rating Not rated - amperage flows between terminals stackedon post and is determined by wire and terminals used.
Voltage Max. Operating 48V DC
Mounting Hardware #10 (M5) Screws


BS 2018 Order-no.: 700102018



Info

Dual PowerPost - Two 5/16"-18 Studs

BS2016 / BS 2016

Dual PowerPost Cable Connectors
Provides a termination point for extending the length of
outboard harnesses or other conductors
• Designed for connecting high amperage conductors
• 2018 is also designed for outboard engine installation
when factory cables need to be extended
• One-piece serrated flange nuts ensure correct and secure connections

Continuous Rating Not rated - amperage flows between terminals stackedon post and is determined by wire and terminals used.
Voltage Max. Operating 48V DC
Mounting Hardware #10 (M5) Screws


BS 2016 Order-no.: 700102016



Info

PowerPost Plus - 5/16"-18 Stud

BS2102 / BS 2102

PowerPost Plus Cable Connectors
Enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit

• Allows small wire connections at high amperage cable connections
• One-piece serrated flange nut ensures correct and secure connections

Continuous Rating 150A DC
Voltage Max. Operating 48V DC
Mounting Hardware 1/4" Screws
Bus Material Tin-Plated Copper


BS 2102 Order-no.: 700102102



Info

PowerPost Plus - 1/4"-20 Stud

BS2101 / BS 2101

PowerPost Plus Cable Connectors
Enables connection of multiple smaller wires in spaces where a traditional bus bar may not fit

• Allows small wire connections at high amperage cable connections
• One-piece serrated flange nut ensures correct and secure connections

Continuous Rating 150A DC
Voltage Max. Operating 48V DC
Mounting Hardware 1/4" Screws
Bus Material Tin-Plated Copper


BS 2101 Order-no.: 700102101



Info

Terminal Block 65A

BS2602 / BS 2602 / BS2604 / BS 2604 / BS2606 / BS 2606 / BS2608 / BS 2608 / BS2610 / BS 2610

Terminal Blocks
Fully insulated independent terminal blocks to isolate circuits
• Each screw pair is one isolated circuit
• Terminal Block Jumpers allow creation of common circuits
• Closed back design insulates power from the mounting surface

Bus Material Nickel-Plated Brass
Base Material High temp UL 94 VO thermoplastics

BS 2602 - 2-circuits
BS 2604 - 4-circuits
BS 2606 - 6-circuits
BS 2608 - 8-circuits

BS 2610 - 10-circuits


BS 2602 Order-no.: 700102602


BS 2604 Order-no.: 700102604


BS 2606 Order-no.: 700102606


BS 2608 Order-no.: 700102608


BS 2610 Order-no.: 700102610



Info

Terminal Block 30A

BS2502 / BS 2502 / BS2504 / BS 2504 / BS2506 / BS 2506 / BS2508 / BS 2508 / BS2510 / BS 2510 / BS2512 / BS 2512

Terminal Blocks
Fully insulated independent terminal blocks to isolate circuits
• Each screw pair is one isolated circuit
• Terminal Block Jumpers allow creation of common circuits
• Closed back design insulates power from the mounting surface

Bus Material Nickel-Plated Brass
Base Material High temp UL 94 VO thermoplastics

BS 2502 - 2-circuits
BS 2504 - 4-circuits
BS 2506 - 6-circuits
BS 2508 - 8-circuits

BS 2510 - 10-circuits
BS 2512 - 12-circuits


BS 2502 Order-no.: 700102502


BS 2504 Order-no.: 700102504


BS 2506 Order-no.: 700102506


BS 2508 Order-no.: 700102508


BS 2510 Order-no.: 700102510


BS 2512 Order-no.: 700102512



Info

Terminal Block 20A

BS2402 / BS 2402 / BS2404 / BS 2404 / BS2406 / BS 2406 / BS2408 / BS 2408 / BS2410 / BS 2410

Terminal Blocks
Fully insulated independent terminal blocks to isolate circuits
• Each screw pair is one isolated circuit
• Terminal Block Jumpers allow creation of common circuits
• Closed back design insulates power from the mounting surface

Bus Material Nickel-Plated Brass
Base Material High temp UL 94 VO thermoplastics

BS 2402 - 2-circuits
BS 2404 - 4-circuits
BS 2406 - 6-circuits
BS 2408 - 8-circuits
BS 2410 - 10-circuits


BS 2402 Order-no.: 700102402


BS 2404 Order-no.: 700102404


BS 2406 Order-no.: 700102406


BS 2408 Order-no.: 700102408


BS 2410 Order-no.: 700102410



Info

Terminal Block Jumper

BS9218 / BS 9218 / BS9217 / BS 9217 / BS9216 / BS 9216

Terminal Block Jumpers

Combines independent circuits on Terminal Blocks and ST-Blade Fuse Blocks 5035 and 5037

BS 9218 - For use with 20A Terminal Blocks

BS 9217 - For use with 30A Terminal Blocks and ST-Blade Fuse Blocks 5035 & 5037

BS 9216 - For use with 65A Terminal Blocks

 

 


BS 9218 Order-no.: 700109218


BS 9217 Order-no.: 700109217


BS 9216 Order-no.: 700109216



Info

Mini PowerPost - 1/4"-20 Stud

BS2011 / BS 2011

PowerPost Cable Connectors
Insulated single stainless steel stud terminates multiple large conductors

. One-piece serrated flange nuts ensure correct and secure connections

Continuous Rating Not rated - stacked on post and isdetermined by wire and terminals used.

Voltage Max. Operating 48V DC

Mounting Hardware #8 Screws


BS 2011 Order-no.: 700102011



Info

PowerBar 1000 - 12 5/16" Terminal Studs

BS1993 / BS 1993

PowerBar 1000 - 1000A Common BusBar
Complex wiring systems require a single point to consolidatelarge and small conductors. The PowerBar 1000 offers a busbar with various size studs and screws to connect conductorsand fuse blocks.
• For large complex wiring systems
• Tin-plated pure electrical copper for maximum conductivity
• Stepped bus design offers two elevations for conductors which doublesthe density of the wire loom compared to traditional bus bars
• Busbar and fuse block elevations match common fuse blocks allowing formultiple fuse block attachment, eliminating the need for connecting cables
• One-piece serrated flange nuts ensure correct and secure connections
• Stainless steel 8-32 screws with captive lock washers for securingsmaller gauge wires
• Busbar may be cut to a shorter length to accommodate constricted spaces
• Bi-directional busbar end caps allow the ganging of additional busbars
• Snap on insulating cover meets ABYC and USCG requirements and includeslabel recess
• Models available to accommodate either 3/8" or 5/16" terminals

Continuous Rating 1000A
Voltage Max. Operating 150V AC / 48V DC
Mounting Hardware#10 (M5) Screws
Bus Material Tin-Plated Copper C11000


BS 1993 Order-no.: 700101993



Info

PowerPost - 1/4"-20 Stud

BS2001 / BS 2001

PowerPost Cable Connectors
Insulated single stainless steel stud terminates multiple large conductors

. One-piece serrated flange nuts ensure correct and secure connections

Continuous Rating Not rated - stacked on post and isdetermined by wire and terminals used.

Voltage Max. Operating 48V DC

Mounting Hardware 1/4" Screws


BS 2001 Order-no.: 700102001



Info

PowerPost - 5/16"-18 Stud

BS2002 / BS 2002

PowerPost Cable Connectors
Insulated single stainless steel stud terminates multiple large conductors

. One-piece serrated flange nuts ensure correct and secure connections

Continuous Rating Not rated - stacked on post and isdetermined by wire and terminals used.

Voltage Max. Operating 48V DC

Mounting Hardware 1/4" Screws


BS 2002 Order-no.: 700102002



Info

Mini PowerPost - 10-32 Stud

BS2010 / BS 2010

PowerPost Cable Connectors
Insulated single stainless steel stud terminates multiple large conductors

. One-piece serrated flange nuts ensure correct and secure connections

Continuous Rating Not rated - stacked on post and isdetermined by wire and terminals used.

Voltage Max. Operating 48V DC

Mounting Hardware #8 Screws


BS 2010 Order-no.: 700102010



Info

PowerBar 1000 - 8 5/16" Terminal Studs

BS1992 / BS 1992

PowerBar 1000 - 1000A Common BusBar
Complex wiring systems require a single point to consolidatelarge and small conductors. The PowerBar 1000 offers a busbar with various size studs and screws to connect conductorsand fuse blocks.
• For large complex wiring systems
• Tin-plated pure electrical copper for maximum conductivity
• Stepped bus design offers two elevations for conductors which doublesthe density of the wire loom compared to traditional bus bars
• Busbar and fuse block elevations match common fuse blocks allowing formultiple fuse block attachment, eliminating the need for connecting cables
• One-piece serrated flange nuts ensure correct and secure connections
• Stainless steel 8-32 screws with captive lock washers for securingsmaller gauge wires
• Busbar may be cut to a shorter length to accommodate constricted spaces
• Bi-directional busbar end caps allow the ganging of additional busbars
• Snap on insulating cover meets ABYC and USCG requirements and includeslabel recess
• Models available to accommodate either 3/8" or 5/16" terminals

Continuous Rating 1000A
Voltage Max. Operating 150V AC / 48V DC
Mounting Hardware#10 (M5) Screws
Bus Material Tin-Plated Copper C11000


BS 1992 Order-no.: 700101992



Info

PowerBar 1000 - 12 3/8" Terminal Studs

BS1991 / BS 1991

PowerBar 1000 - 1000A Common BusBar
Complex wiring systems require a single point to consolidatelarge and small conductors. The PowerBar 1000 offers a busbar with various size studs and screws to connect conductorsand fuse blocks.
• For large complex wiring systems
• Tin-plated pure electrical copper for maximum conductivity
• Stepped bus design offers two elevations for conductors which doublesthe density of the wire loom compared to traditional bus bars
• Busbar and fuse block elevations match common fuse blocks allowing formultiple fuse block attachment, eliminating the need for connecting cables
• One-piece serrated flange nuts ensure correct and secure connections
• Stainless steel 8-32 screws with captive lock washers for securingsmaller gauge wires
• Busbar may be cut to a shorter length to accommodate constricted spaces
• Bi-directional busbar end caps allow the ganging of additional busbars
• Snap on insulating cover meets ABYC and USCG requirements and includeslabel recess
• Models available to accommodate either 3/8" or 5/16" terminals

Continuous Rating 1000A
Voltage Max. Operating 150V AC / 48V DC
Mounting Hardware#10 (M5) Screws
Bus Material Tin-Plated Copper C11000


BS 1991 Order-no.: 700101991



Info

PowerBar 1000 - 8 3/8" Terminal Studs

BS1990 / BS 1990

PowerBar 1000 - 1000A Common BusBar
Complex wiring systems require a single point to consolidatelarge and small conductors. The PowerBar 1000 offers a busbar with various size studs and screws to connect conductorsand fuse blocks.
• For large complex wiring systems
• Tin-plated pure electrical copper for maximum conductivity
• Stepped bus design offers two elevations for conductors which doublesthe density of the wire loom compared to traditional bus bars
• Busbar and fuse block elevations match common fuse blocks allowing formultiple fuse block attachment, eliminating the need for connecting cables
• One-piece serrated flange nuts ensure correct and secure connections
• Stainless steel 8-32 screws with captive lock washers for securingsmaller gauge wires
• Busbar may be cut to a shorter length to accommodate constricted spaces
• Bi-directional busbar end caps allow the ganging of additional busbars
• Snap on insulating cover meets ABYC and USCG requirements and includeslabel recess
• Models available to accommodate either 3/8" or 5/16" terminals

Continuous Rating 1000A
Voltage Max. Operating 150V AC / 48V DC
Mounting Hardware#10 (M5) Screws
Bus Material Tin-Plated Copper C11000


BS 1990 Order-no.: 700101990



Info

PowerBar 600A BusBar - Eight 3/8"-16 Studs

BS2107 / BS 2107

PowerBar - 600A Common BusBars
High amperage BusBar with 3/8" terminal studs

Continuous Rating 545A AC / 600A DC
Voltage Max. Operating300V AC / 48V DC
Mounting Hardware #10 (M5) Screws
Bus Material Tin-Plated Copper C11000


BS 2107 Order-no.: 700102107



Info

PowerBar 600A BusBar - Four 3/8"-16 Studs

BS2104 / BS 2104 / BS2708 / BS 2708

PowerBar - 600A Common BusBars
High amperage BusBar with 3/8" terminal studs

Continuous Rating 545A AC / 600A DC
Voltage Max. Operating300V AC / 48V DC
Mounting Hardware #10 (M5) Screws
Bus Material Tin-Plated Copper C11000


BS 2104 Order-no.: 700102104


BS 2708 (Cover 2104) Order-no.: 700102708



Info

PowerBar Dual BusBar - Two 3/8"-16 Studs

BS2020 / BS 2020

PowerBar Common BusBars
Provides compact high-amp busing with 3/8" terminal studs

Continuous Rating up to 200A
Voltage Max. Operating 48V DC
Mounting Holes Accepts #10 (M5) Screws
Bus Material Tin-Plated Copper C11000


BS 2020 Order-no.: 700102020



Info

PowerBar Dual BusBar - Two 3/8"-16 Stud and Insulators

BS2019 / BS 2019

PowerBar Common BusBars
Provides compact high-amp busing with 3/8" terminal studs

Continuous Rating up to 200A
Voltage Max. Operating 48V DC
Mounting Holes Accepts #10 (M5) Screws
Bus Material Tin-Plated Copper C11000


BS 2019 Order-no.: 700102019



Info

MaxiBus Insulating Cover for PN 2127 and 2128

BS2719 / BS 2719

MaxiBus - 250A Common BusBars
Now with insert-molded stainless steel studs and optional
fully enclosed insulating base and cover
• Insulating cover with breakouts for easy wire access
• Insulating cover meets ABYC insulation requirements
• One-piece serrated flange nuts ensure correct and secure connections


Continuous Rating 250A AC / 250A DC

Voltage Max. Operating 300V AC / 48V DC

Mounting Holes Accept #10 (M5) Screws

Bus Material Tin-Plated Copper C11000


BS 2719 Order-no.: 700102719



Info

MaxiBus 250A BusBar - Two 5/16"-18 Studs and Six #10-24 Screws

BS2128 / BS 2128

MaxiBus - 250A Common BusBars
Now with insert-molded stainless steel studs and optional
fully enclosed insulating base and cover
• Insulating cover with breakouts for easy wire access
• Insulating cover meets ABYC insulation requirements
• One-piece serrated flange nuts ensure correct and secure connections


Continuous Rating 250A AC / 250A DC

Voltage Max. Operating 300V AC / 48V DC

Mounting Holes Accept #10 (M5) Screws

Bus Material Tin-Plated Copper C11000


BS 2128 Order-no.: 700102128



Info

MaxiBus 250A BusBar - Four 5/16"-18 Studs

BS2127 / BS 2127

MaxiBus - 250A Common BusBars
Now with insert-molded stainless steel studs and optional
fully enclosed insulating base and cover
• Insulating cover with breakouts for easy wire access
• Insulating cover meets ABYC insulation requirements
• One-piece serrated flange nuts ensure correct and secure connections


Continuous Rating 250A AC / 250A DC

Voltage Max. Operating 300V AC / 48V DC

Mounting Holes Accept #10 (M5) Screws

Bus Material Tin-Plated Copper C11000


BS 2127 Order-no.: 700102127



Info

MaxiBus Insulating Cover for PN 2105 and 2126

BS2718 / BS 2718

MaxiBus - 250A Common BusBars
Now with insert-molded stainless steel studs and optional
fully enclosed insulating base and cover
• Insulating cover with breakouts for easy wire access
• Insulating cover meets ABYC insulation requirements
• One-piece serrated flange nuts ensure correct and secure connections


Continuous Rating 250A AC / 250A DC

Voltage Max. Operating 300V AC / 48V DC

Mounting Holes Accept #10 (M5) Screws

Bus Material Tin-Plated Copper C11000


BS 2718 Order-no.: 700102718



Info

MaxiBus 250A BusBar - Six 5/16"-18 Studs

BS2126 / BS 2126

MaxiBus - 250A Common BusBars
Now with insert-molded stainless steel studs and optional
fully enclosed insulating base and cover
• Insulating cover with breakouts for easy wire access
• Insulating cover meets ABYC insulation requirements
• One-piece serrated flange nuts ensure correct and secure connections


Continuous Rating 250A AC / 250A DC

Voltage Max. Operating 300V AC / 48V DC

Mounting Holes Accept #10 (M5) Screws

Bus Material Tin-Plated Copper C11000


BS 2126 Order-no.: 700102126



Info

MaxiBus 250A BusBar - Two 5/16"-18 Studs and Twelve #10-24 Screws

BS2105 / BS 2105

MaxiBus - 250A Common BusBars
Now with insert-molded stainless steel studs and optional
fully enclosed insulating base and cover
• Insulating cover with breakouts for easy wire access
• Insulating cover meets ABYC insulation requirements
• One-piece serrated flange nuts ensure correct and secure connections


Continuous Rating 250A AC / 250A DC

Voltage Max. Operating 300V AC / 48V DC

Mounting Holes Accept #10 (M5) Screws

Bus Material Tin-Plated Copper C11000


BS 2105 Order-no.: 700102105



Info

Common 150A BusBar - Four 1/4"-20 Studs with Cover

BS2307 / BS 2307

DualBus Plus - 150A Common BusBarsSecure, clear polycarbonate cover snaps on easily to meet ABYC insulation requirements

• Combines negative and positive buses on one block

• Cover release buttons

• One-piece stainless flange nuts ensure safe and secure connections

Continuous Rating130A AC / 150A DC

Voltage Max. Operating 300V AC / 48V DC

Mounting Holes Accept #10 (M5) Screws

Bus Material Tin-Plated Copper C11000


BS 2307 Order-no.: 700102307



Info

Common 150A BusBar - 20 Gang with Cover

BS2312 / BS 2312

DualBus Plus - 150A Common BusBarsSecure, clear polycarbonate cover snaps on easily to meet ABYC insulation requirements

• Combines negative and positive buses on one block

• Cover release buttons

• One-piece stainless flange nuts ensure safe and secure connections

Continuous Rating130A AC / 150A DC

Voltage Max. Operating 300V AC / 48V DC

Mounting Holes Accept #10 (M5) Screws

Bus Material Tin-Plated Copper C11000


BS 2312 Order-no.: 700102312



Info

Common 150A BusBar - Four 1/4"-20 Studs

BS2303 / BS 2303

DualBus Plus - 150A Common BusBarsSecure, clear polycarbonate cover snaps on easily to meet ABYC insulation requirements

• Combines negative and positive buses on one block

• Cover release buttons

• One-piece stainless flange nuts ensure safe and secure connections

Continuous Rating130A AC / 150A DC

Voltage Max. Operating 300V AC / 48V DC

Mounting Holes Accept #10 (M5) Screws

Bus Material Tin-Plated Copper C11000


BS 2303 Order-no.: 700102303



Info

Common 150A BusBar - 10 Gang with Cover

BS2300 / BS 2300

DualBus Plus - 150A Common BusBarsSecure, clear polycarbonate cover snaps on easily to meet ABYC insulation requirements

• Combines negative and positive buses on one block

• Cover release buttons

• One-piece stainless flange nuts ensure safe and secure connections

Continuous Rating130A AC / 150A DC

Voltage Max. Operating 300V AC / 48V DC

Mounting Holes Accept #10 (M5) Screws

Bus Material Tin-Plated Copper C11000


BS 2300 Order-no.: 700102300



Info

DualBus 100A BusBar - 10 Circuit

BS2702 / BS 2702 / BS2710 / BS 2710

DualBus - 100A Common BusBarsCombines two buses on one block

• Combines negative and positive buses for DC Systems and neutral and ground buses for AC Systems

Continuous Rating 100A AC/100A DC
Voltage Max. Operating 300V AC / 48V DC
Bus Material Tin-Plated Copper C11000

Terminal Screws: 10 per bus × #8-32

Mounting Holes: Accept #10 (M5) Screws


BS 2702 Order-no.: 700102702


BS 2710 (Cover 2702) Order-no.: 700102710



Info

DualBus 100A BusBar - 5 Circuit

BS2701 / BS 2701 / BS2709 / BS 2709

DualBus - 100A Common BusBarsCombines two buses on one block

• Combines negative and positive buses for DC Systems and neutral and ground buses for AC Systems

Continuous Rating 100A AC/100A DC
Voltage Max. Operating 300V AC / 48V DC
Bus Material Tin-Plated Copper C11000

Terminal Screws: 5 per bus × #8-32

Mounting Holes: Accept #10 (M5) Screws


BS 2701 Order-no.: 700102701


BS 2709 (Cover 2701) Order-no.: 700102709



Info

Common 100A Mini BusBar - 4 Gang

BS2305 / BS 2305

Provides busing for limited space applications
• One-piece serrated flange nut ensures correct and secure connections

Continuous Rating: 100A AC / 100A DC
Voltage Max. Operating: 300V AC / 48V DC
Mounting HolesAccepts: #10 (M4) Screws
Bus Material Tin-Plated Copper: C11000


BS 2305 Order-no.: 700102305



Info

Common 100A Mini BusBar - 4 Gang with Cover

BS2315 / BS 2315

Provides busing for limited space applications
• One-piece serrated flange nut ensures correct and secure connections

Continuous Rating: 100A AC / 100A DC
Voltage Max. Operating: 300V AC / 48V DC
Mounting HolesAccepts: #10 (M4) Screws
Bus Material Tin-Plated Copper: C11000


BS 2315 Order-no.: 700102315



Info

Common 100A Mini BusBar - 5 Gang with Cover

BS2314 / BS 2314

Provides busing for limited space applications
• One-piece serrated flange nut ensures correct and secure connections

Continuous Rating: 100A AC / 100A DC
Voltage Max. Operating: 300V AC / 48V DC
Mounting HolesAccepts: #10 (M5) Screws
Bus Material Tin-Plated Copper: C11000


BS 2314 Order-no.: 700102314



Info

Water-Resistant - 100A BusBar

BS 2356 / BS2356

Provides secure water-resistant bussing for harsh environments. The single side nesting design allows for wire entry from one side to maximize space.
• Water-resistant IP66 design
• Accepts standard ring or fork type terminals to allow for simplewiring with standard tools.
• Accepts a wide range of wire sizes
• Integral plugs maintain water-resistant rating if less than fourloads are required
• Nests with Water-Resistant 100A Common BusBar (2356 or 2356100)and ST-Blade Water-Resistant Fuse Block (5056 or 5056100)
• Ideal for positive distribution or for the collection of DC negativeor AC grounding conductors
• Tin-plated copper busses and fuse clips
• Includes four write-on circuit labels
• Small format standard and custom labels available

Continuous Rating 100A AC / 100A DC
Voltage Max. Operating 300V AC / 48V DC
Input Wire Size (1) 8 AWG to 4 AWG
Load Wire Size (4) 16 AWG to 10 AWG
Mounting Holes Accepts 1/4" (6mm) Screws
Bus Material Tin-Plated Copper C11000

 

Available from October 2020!


BS 2356 Order-no.: 700102356



Info