Batterie Accessories 

BLA

BLA

The battery equalizer BLA is provided to equalize voltages when charging batteries in series connection. The BLA always works when occurs voltage differences between the 12 V-battery blocks. It works during loading or unloading.

The bi-directional battery equalizer BLA works in a way to balance the load in both directions regardless the condition of battery. If the voltage difference in the series batteries reach 10 mV, the BLA switches on step by step.

The BLA can offset one 24 V, for higher voltages extra BLA are connected in series, it means that for a 36 V battery system must be used 2 BLA, for a 48 V, 3 pieces are necessary.

 

Dimensions : 80 x 38 x 21 mm

 

Not suitable for lithium batteries!

 

 

 


BLA Order-no.: 700016160



Info Manual

BK 6

BK6

Battery clamps with M8-threaded terminal (- pole) and

M10-threaded terminal (+ pole)


BK 6 Order-no.: 600080006



Info

BKM

BKM

Mid size battery clamps max. 50mm2


BKM Order-no.: 600080000



Info

BA 5 / BA 7

BA5 BA7 BA BS4005 BS4006

Cover for battery poles type BK6 and BKM. Cable cross section up to 95mm²

Delivery in red/black pairs. 


BA 5 Order-no.: 700104005


BA 7 Order-no.: 700104006



Info

BA 6

BA6 BA

Cover for Battery poles type BK6 and BKM.


BA 6 Order-no.: 601404568



Info

BA 1 / BA 2 / BA 3

BA1rt BA1sw BA2rt BA2sw BA3sw BA3rt BA1 BA2 BA3 BA / BS4010 BS4011 BS4012 BS4013 BS4014 BS4015

Cable cap insulators. Insulates single studs. For cable cross section

BA 1: 10 – 25 mm²

BA 2: 35 – 70 mm²

BA 3: 95 – 120 mm²


BA 1 rt Order-no.: 700104010


BA 1 sw Order-no.: 700104011


BA 2 rt Order-no.: 700104012


BA 2 sw Order-no.: 700104013


BA 3 rt Order-no.: 700104014


BA 3 sw Order-no.: 700104015



Info

Automotive CableCap Insulators

BS4016 / BS 4016 / BS4017 / BS 4017

Insulates battery terminals which have standardautomotive posts


BS 4016 Order-no.: 700104016


BS 4017 Order-no.: 700104017



Info

Square CableCap Insulators

BS4018 / BS 4018

Insulates battery terminals which have in-line dual posts


BS 4018 Order-no.: 700104018



Info

Stud Mount Insulating Boots

BS4000 / BS 4000

Quickly and easily insulate conductive posts and studs
• Press-fit design works with all 5/16” (M8) and 3/8” (M10) posts  and studs
• Ideal for ML-Series Remote Battery Switches, Solenoids & Automatic Charging Relays, battery terminals, power posts, bus bars, battery switches, and much more.
• For use with insulated ring terminals and lugs only


BS 4000 Order-no.: 700104000



Info

Rotating Cable Cap Insulators

BS4001 / BS 4001 / BS9030B / BS 9030B / BS9031B / BS 9031B / 9030 / 9031

Insulates battery terminals which have integral wing nut posts
• Top rotates 360 degrees to allow cable entry from any angle


BS 4001 Order-no.: 700104001



Info

Dual Entry PowerPost Cable Insulators

BS4002 / BS 4002 / BS4003 / BS 4003

Protects against accidental short circuits

- For use with Dual PowerPost Cable Connectors


BS 4002 Order-no.: 700104002


BS 4003 Order-no.: 700104003



Info

PowerPost Insulator

BS4004 / BS 4004

Provides electrical insulation for single studs and large cables

• Included with 2001, 2002, 2003, 2101, 2102, 2103, and 2019

 

 


BS 4004 Order-no.: 700104004



Info

Battery Terminal Mount Bus Bars

BS2340 / BS 2340 / BS2341B / BS 2341B / BS2342B / BS 2342B

Easily add positive and negative busbars to the battery terminals
• Easily add positive and negative busbars directly to a  threaded-post battery terminal
• Tin-plated pure electrical copper for maximum conductivity
• Insulating covers meet ABYC/USCG insulation requirements
• Screw terminals for securing wires
• 2340 Includes four 16-14 AWG and four 12-10 AWG Nylon  Insulated ring terminals

Continuous Rating 100A DC
Voltage Max. Operating 32V DC
Bus Material Tin-Plated Copper C11000
Mounting Thru-hole Clearance for 3/8" (M10) stud
Screw Terminal #8-32 Screws with Captive Star  Lock washer


BS 2340 Order-no.: 700102340



Info